I am one of those who got his Qtek 9000 finally recognized by WMDC after
following your instrucions.

Thank you.



"Feaps®" wrote:

> Hey folks,
>
> I am using the realeased version of WMDC 6 and Vista RTM 6000 Ultimate. I
> have 3 WM devices at home:
>
> 1 WM5 iMate XDA
> 1 WM5 Qtek9100 Vodafone (HTC Wizard)
> 1 WM6 MB release (HTC Wizard)
>
> Here is the scenario:
> .. The XDA was working just fine. Never had a problem with synching.
> .. The WM6 started working after I went to Settings/Connections/USB to PC
> and unchecked "Enable Advanced Network Functionality"
> .. The Qtek was not working at all. Never got to be recognized by WMDC 6.
> This is what was driving me crazy!
>
> Well, I don't know what is going on that made the Qtek different from the
> other ones in terms of "behind the stage" coding/working, but after following
> the wisdom words from Charles Basile at "
> http://www.tabletquestions.com/pocke...ter-vista.html " (please see transcript below) I really got it to work.
>
> Well, one thing I had to do on top of Charles' recommendation was to
> manually go to the OneCare settings/Firewall/Firewall Connection Tool and
> check the option referring to ActiveSync and Windows Mobile Device Center.
>
> -----TRANSCRIPTION------------------
> To resolve, I removed Live Care's "Automatically change Firewall protection
> level..." AND I set the Windows Firewall to the Automatic (Recommended)
> setting. I also clicked on the Firewall conntection tool and under "Select
> the connections you want rhe Firewall Connection Tool to set up for you...:
> I checked the "ActiveSync/Windows Mobile Device Center".
>
> The device was FINALLY recognised and Windows Mobile Device Center is now
> fully synced with my PDA.
> -----------EOT--------------
>
> I know of other people that successfully got their Qteks to work after
> following these intructions.
>
> Thease are my two cents and I hope they buy you some sleep.
>
> Care,
>
>
> -Feaps®
>
>
> "Nicolas" wrote:
>

> > use this: http://www.microsoft.com/windowsmobi...icecenter.mspx
> >
> > Nicolas
> >
> > "Shijaz Abdulla [MVP]" wrote:
> >

> > > Hi,
> > >
> > > I'm using Windows Vista RTM & Windows Mobile Device Center Beta 3. I got a
> > > new i-teq X-BOND (Windows Mobile 5.0, ROM v1.12.24) and set up a sync
> > > partnership with WMDC. It never sync'd even once.
> > >
> > > All I get is the following error:
> > >
> > > On the device:
> > > ActiveSync encountered an error on the desktop. Support Code: 0x85010014
> > >
> > > On the desktop:
> > > Error:
> > > View status%ActiveSync encountered a problem on the desktop.
> > >
> > > I tried deleting and recreating the partnership on both the device and the
> > > PC. I'm running out of ideas - has anybody faced the same issue before?
> > >
> > > I was previously using an i-mate PDA2k, and it sync'd well with Vista
> > > (except that MS Money data didn't synchronize).
> > >
> > > --
> > > Shijaz Abdulla
> > > MVP - ISA Server
> > >
> > > "If the only tool you have is a hammer, every problem begins to look like a
> > > nail."
> > >

I had lots of problems syncing with my Treo. I have found it works ONLY when
I am on the internet. This is a problem for me because I am not on line very
much. See if it works for you.
--
Eileen


"HyTekJosh" wrote:

> Still no go...I am prompted for my PPC PIN so I don't think the Firewall is
> the issue. Its been on the automatic (recommended) settings from the
> beginning.
>
> Any other ideas? I am at a loss as to why the sync worked on my laptop but
> not my desktop.
>
> Thank you!
>
> "Chris S" wrote:
>

> > Go here for the fix:
> > http://www.tabletquestions.com/pocke...ter-vista.html
> > --
> > AMD-FX-60
> > 2gb OCZ Plat. memory
> > ATI 1800 AIW
> > 2x74gb Raptors in RAID-0
> > 2x400gb WD HDD in RAID-1
> > Epox Nvidia-4 Ultra M/B
> > Senior Member Overclockers.com
> >
> >
> > "Shijaz Abdulla [MVP]" wrote:
> >

> > > Hi,
> > >
> > > I'm using Windows Vista RTM & Windows Mobile Device Center Beta 3. I got a
> > > new i-teq X-BOND (Windows Mobile 5.0, ROM v1.12.24) and set up a sync
> > > partnership with WMDC. It never sync'd even once.
> > >
> > > All I get is the following error:
> > >
> > > On the device:
> > > ActiveSync encountered an error on the desktop. Support Code: 0x85010014
> > >
> > > On the desktop:
> > > Error:
> > > View status%ActiveSync encountered a problem on the desktop.
> > >
> > > I tried deleting and recreating the partnership on both the device and the
> > > PC. I'm running out of ideas - has anybody faced the same issue before?
> > >
> > > I was previously using an i-mate PDA2k, and it sync'd well with Vista
> > > (except that MS Money data didn't synchronize).
> > >
> > > --
> > > Shijaz Abdulla
> > > MVP - ISA Server
> > >
> > > "If the only tool you have is a hammer, every problem begins to look like a
> > > nail."
> > >

It only works if you are connected to the internet at the time. Don't know
why but I get the messages when I am not connected and it works fine if I am.
It is a problem for me because I work on a laptop and usually don't have
access.
--
Eileen


"Shijaz Abdulla [MVP]" wrote:

> Hi,
>
> I'm using Windows Vista RTM & Windows Mobile Device Center Beta 3. I got a
> new i-teq X-BOND (Windows Mobile 5.0, ROM v1.12.24) and set up a sync
> partnership with WMDC. It never sync'd even once.
>
> All I get is the following error:
>
> On the device:
> ActiveSync encountered an error on the desktop. Support Code: 0x85010014
>
> On the desktop:
> Error:
> View status%ActiveSync encountered a problem on the desktop.
>
> I tried deleting and recreating the partnership on both the device and the
> PC. I'm running out of ideas - has anybody faced the same issue before?
>
> I was previously using an i-mate PDA2k, and it sync'd well with Vista
> (except that MS Money data didn't synchronize).
>
> --
> Shijaz Abdulla
> MVP - ISA Server
>
> "If the only tool you have is a hammer, every problem begins to look like a
> nail."
>