CD error message re drivers

Posted: 12-19-2003, 01:55 AM

Christina

Guest
Posts: n/a

I recently got a new hard drive. I tried to install the
Easy CD software that was on the previous hard drive (both
with XP Home) but for some reason it wouldn't accept it. I
bought the newer version and that installed fine and I
tried a test burn without difficulty. My problem is that
when I boot up, I get an error message popup in the sys.
tray that says "CD Recording Software will cause Windows
to become unstable. Windows has prevented these drivers
from loading." I tried removing the program and
reinstalling but it is still there.

I ran a registry cleaning program and it said a program
listing I could delete was "HighMAT Extension to XP CD
Writing Wizard" which I tried but the same error showed
up. (Because of this, I did a sys. restore to before I
took it out to replace it.) Norton Disk Doctor didn't
solve the problem either.

I followed the instructions on MS's site as to what to do
when this error comes up. The 2 system files it mentioned
I did not find on my computer but there was one change I
made in the registry as it instructed. Still no removal
of the error message.

It appears I am having some programs hangup because of
this and would like to resolve it without having to
reinstall XP or reformat. Any suggestions welcomed!

Responses to "CD error message re drivers"

Cari MS-MVP

Guest
Posts: n/a

Re: CD error message re drivers

Posted: 12-20-2003, 06:01 AM

You need to go to Roxio's website (www.roxio.com) who make EZCD Creator and
download their updates. It is a known problem with v5.0 and XP... and
always has been since XP was released. They did fix it... but you need to
get the updates yourself.

Cari
www.coribright.com

"Christina" <anonymous@discussions.microsoft.com> wrote in message
news:03e001c3c5d3$26ae6300$a601280a@phx.gbl...

>I recently got a new hard drive. I tried to install the
> Easy CD software that was on the previous hard drive (both
> with XP Home) but for some reason it wouldn't accept it. I
> bought the newer version and that installed fine and I
> tried a test burn without difficulty. My problem is that
> when I boot up, I get an error message popup in the sys.
> tray that says "CD Recording Software will cause Windows
> to become unstable. Windows has prevented these drivers
> from loading." I tried removing the program and
> reinstalling but it is still there.
>
> I ran a registry cleaning program and it said a program
> listing I could delete was "HighMAT Extension to XP CD
> Writing Wizard" which I tried but the same error showed
> up. (Because of this, I did a sys. restore to before I
> took it out to replace it.) Norton Disk Doctor didn't
> solve the problem either.
>
> I followed the instructions on MS's site as to what to do
> when this error comes up. The 2 system files it mentioned
> I did not find on my computer but there was one change I
> made in the registry as it instructed. Still no removal
> of the error message.
>
> It appears I am having some programs hangup because of
> this and would like to resolve it without having to
> reinstall XP or reformat. Any suggestions welcomed!

Christina

Guest
Posts: n/a

Re: CD error message re drivers

Posted: 12-20-2003, 03:35 PM

I did download their update. Now ESCD doesn't even open!!

>-----Original Message-----
>You need to go to Roxio's website (www.roxio.com) who

make EZCD Creator and

>download their updates. It is a known problem with v5.0

and XP... and

>always has been since XP was released. They did fix

it... but you need to

>get the updates yourself.
>
>Cari
>www.coribright.com
>
>"Christina" <anonymous@discussions.microsoft.com> wrote

in message

>news:03e001c3c5d3$26ae6300$a601280a@phx.gbl...
>>I recently got a new hard drive. I tried to install the
>> Easy CD software that was on the previous hard drive

(both

>> with XP Home) but for some reason it wouldn't accept

it. I

>> bought the newer version and that installed fine and I
>> tried a test burn without difficulty. My problem is that
>> when I boot up, I get an error message popup in the sys.
>> tray that says "CD Recording Software will cause Windows
>> to become unstable. Windows has prevented these drivers
>> from loading." I tried removing the program and
>> reinstalling but it is still there.
>>
>> I ran a registry cleaning program and it said a program
>> listing I could delete was "HighMAT Extension to XP CD
>> Writing Wizard" which I tried but the same error showed
>> up. (Because of this, I did a sys. restore to before I
>> took it out to replace it.) Norton Disk Doctor didn't
>> solve the problem either.
>>
>> I followed the instructions on MS's site as to what to

>> when this error comes up. The 2 system files it

mentioned

>> I did not find on my computer but there was one change I
>> made in the registry as it instructed. Still no removal
>> of the error message.
>>
>> It appears I am having some programs hangup because of
>> this and would like to resolve it without having to
>> reinstall XP or reformat. Any suggestions welcomed!
>
>
>.
>

Danman

Guest
Posts: n/a

Re: CD error message re drivers

Posted: 12-26-2003, 12:28 AM

On Thu, 18 Dec 2003 17:55:17 -0800, "Christina"
<anonymous@discussions.microsoft.com> wrote:

> I recently got a new hard drive. I tried to install the
> Easy CD software that was on the previous hard drive (both
> with XP Home) but for some reason it wouldn't accept it. I
> bought the newer version and that installed fine and I
> tried a test burn without difficulty. My problem is that
> when I boot up, I get an error message popup in the sys.
> tray that says "CD Recording Software will cause Windows
> to become unstable. Windows has prevented these drivers
> from loading." I tried removing the program and
> reinstalling but it is still there.
>
> I ran a registry cleaning program and it said a program
> listing I could delete was "HighMAT Extension to XP CD
> Writing Wizard" which I tried but the same error showed
> up. (Because of this, I did a sys. restore to before I
> took it out to replace it.) Norton Disk Doctor didn't
> solve the problem either.
>
> I followed the instructions on MS's site as to what to do
> when this error comes up. The 2 system files it mentioned
> I did not find on my computer but there was one change I
> made in the registry as it instructed. Still no removal
> of the error message.
>
> It appears I am having some programs hangup because of
> this and would like to resolve it without having to
> reinstall XP or reformat. Any suggestions welcomed!

Try:
I had the same message and followed the below instructions
and the message stopped. Double check the instructions.

Error Message When You Start Windows

CD Recording software will cause Windows to become unstable.
Windows has prevented these drivers from loading.
http://support.microsoft.com/default...;EN-US;Q315345
--
Over and Out
Danman

LinkBack

Thread Tools

Display Modes

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Message about drivers causing Vista to start slowly	Clark	Windows Vista Performance & Maintenance	5	06-16-2006 06:16 AM
Error Message When Sending Message In Windows Mail	Norm	Windows Vista	4	03-23-2006 12:56 AM
Message App Error Message	Lynn Mc	Windows XP Help & Support	0	10-18-2003 01:31 AM
cd rom drivers - help error code 39	Bill	Windows XP Device Drivers	0	07-30-2003 06:53 AM
Error message "APP_BK_038 connection timed out Error 10060"	Ann	Windows XP Messenger	0	07-17-2003 01:05 AM