digital camera

windows xp does not transfer pictures to the picture file
like it once did. No conflicts in device mgr. I have
uninstalled and reinstalled the drivers. The balloon
window says new hardware found, device ready to use. Can
anyone help? It's an Olympus D-380 digital camera I
changed the batteries and tried my scanner in the USB
port to confirm it functionality.

I HAVE PURCHASED A FUJI FINEPIX A205S LOADED ALL THE SOFT
WEAR ON TO MY PC RUNNING WINDOWS XP, AND THE FINEPIXVIEWER
DOES NOT LAUNCH AUTOMATICALLY,WHEN THE CAMERA IS SWITCHED
ON (VIA USB).
I HAVE DOWN LOADED ALL THE RELEVANT SOFT WEAR FROM THE
FUJI SITE AND MICROSOFT SITE AND IT WILL STILL NOT LAUNCH.

WHEN I DO THE SAME ON A PC RUNNING WINDOWS 2000 IT WORKS
PERFECTLY. ANY ONE HAD THE SAME PROBLEM

THANKS J.B.

my pc is not showing me any photos from my digital camera
at all. It says check to see if my camera is connected to
the power cord. It is. I get no response though, as if it
is not connected.

my pc is not showing me any photos from my digital camera
at all. It says check to see if my camera is connected to
the power cord. It is. I get no response though, as if it
is not connected.

>-----Original Message-----
>my pc is not showing me any photos from my digital

camera

>at all. It says check to see if my camera is connected

to

>the power cord. It is. I get no response though, as if

it

>is not connected.
>.
>

> my pc is not showing me any photos from my digital camera

> at all. It says check to see if my camera is connected to
> the power cord. It is. I get no response though, as if it
> is not connected.

================================================

Maybe some of the following info will
help you solve the problem. It seems
that what works for one user may not
work for another.

============================

Possible ways to restore AutoPlay:

I. Connect your camera to your computer,
power it on and make sure you have
pictures on your memory card.

II. Go to...Start / Run and type:

"REGSVR32 SHIMGVW.DLL"
(without the quotes)(Yes, there's
a space between 2 and S)

Click...OK.
This will take a few seconds to run.

III. Read the following KB article:

(817357) The AutoPlay Function Does Not
Work and the Current Media Does Not Appear
in My Computer When You Insert a CD or DVD
http://support.microsoft.com/?kbid=817357

Download the Microsoft
Autoplay Repair Wizard:
http://tinyurl.com/jt1h

Download the autofix.exe file to your
desktop. Once done, double click on
this file. A window will open. Follow the
directions on the screen.

Once done, turn off the camera and
reboot.

IV. Power the camera on, wait 10-15
seconds for XP to recognize it, you
should hear some beeping sound and
the window should now open giving
you the option of downloading photos
from the camera.

V. You may have to set the options for
this window. Click on My Computer,
your camera should be listed there
under Devices with Removable Storage.
Right click on it and click on Properties.
In the opening window, click on the
Autoplay tab and under Select, scroll to
Pictures to select it. Select the button...
Prompt me...

============================

Here is the previous fix.

Go this site:
http://tinyurl.com/7g4k

Fourth item from the top of the page. Two
fixes are presented. One is to edit the
registry, the second one is to download
Tweak UI and do the repair with it. If you
are comfortable editing the registry, go
ahead.

If not, download Tweak UI.
http://tinyurl.com/36n

Once you download Tweak UI file in one
of your folders, double click on it to install
it.

Once this is done, click on Start and click
on All Programs. Look for Power Toys for
Windows XP. Click on it and Tweak UI
will be listed. Click on it to get it started.

A window will open. Click on the + sign
next to My Computer, then click on the +
sign next to Autoplay. Then, click on Types.
Check the boxes for Autoplay Drive Types
and click OK.

============================

If all else fails...purchase a USB memory
card reader.

Good luck.

=============================

Some users have reported success using a
fix posted by Roberto Cordero...it may be
worth a try. Proceed at your own risk...

Before editing your registry, I strongly suggest
that you read the following KB article:

Information About Editing the Registry
http://support.microsoft.com/?kbid=256986#Topic2

Here's a copy of his message:
================================
================================

Hello all,

I've seen many posts on this topic,
and actually I had this same problem.

My Vivitar 3550 camera used to work
with the Scanner and Camera Wizard,
until I installed Windows XP Service
Pack 1. It wasn't until more than a year
later than I found THE solution.

In the following website they post a
solution that (I think) has an error on
it, or something missing:
http://tinyurl.com/7g4k

However, thanks to them for taking
me closer to the REAL cause of the
problem and how to solve it. The
article tells you to look for a Registry
setting in:

HKEY_CURRENT_USER\Software\
Microsoft\Windows\CurrentVersion\
Policies\Explorer

If you followed their instructions, great
but we are not done yet. Look for a
similar setting in:

HKEY_LOCAL_MACHINE\Software\
Microsoft\Windows\CurrentVersion\
Policies\Explorer

In my case, the "NoDriveTypeAutoRun"
value here was a REG_BINARY instead
of a REG_DWORD. If this is your case,
you can try these steps:

1. Delete that binary value by highlighting
the "NoDriveTypeAutoRun" value and
pressing the DEL key.

2. Right-click on that right-pane, select
New - DWORD value.

3. Name the New Value as "NoDrive
TypeAutoRun"

4. Double-click or press Enter to modify
the newly created value.

5. Select the "Decimal" radio button,
and then type "145" without the quotes.

6. Click OK and then close the Registry
Editor.

7. Save your work and restart your
computer. (Logging off is not enough.)

After the reboot, give your camera a try.
Mine brought the Scanner and Camera
Wizard back to life!

Please note: I don't know why that value
was binary instead of dword, and if that
was supposed to be the case. However,
I can tell you that following the steps
above was the only way I could get the
Scanner and Camera Wizard to work
with my camera again. Neither TweakUI
nor the FAQ from the Expert Zone worked
for me.

Good luck.
Roberto Cordero

==================================
==================================

--

John Inzer
Picture It! MVP
return e-mail disabled

Picture It! Support Center
http://support.microsoft.com/?pr=pic

I HAVE JUST WIPED CLEAN MY P/C BACK TO FACTORY SETTINGS, I HAVE DOWNLOADED ALL MY SOFTWARE . WHEN I PUT MY DIGITAL CAMERA TO DOWNLOAD PICS TO P/C NOTHING HAPPENS , CAN ANYONE HEL
THANKS

Do you have the latest driver? What brand and number is the camera?

--
Mary Sauer MS MVP
http://office.microsoft.com/clipart/
http://www.mvps.org/msauer/getting_started.htm
news://msnews.microsoft.com
"GARY STOCK" <GSTOCK3694@AOL.COM> wrote in message
news:331220BE-EC5E-425B-9B98-0AE2708A80C2@microsoft.com...

> I HAVE JUST WIPED CLEAN MY P/C BACK TO FACTORY SETTINGS, I HAVE DOWNLOADED ALL MY

SOFTWARE . WHEN I PUT MY DIGITAL CAMERA TO DOWNLOAD PICS TO P/C NOTHING HAPPENS , CAN
ANYONE HELP

> THANKS