Driver ScanJet 3300C

Did you uninstall your previous Win98 driver before attempting to install
the new XP driver you downloaded? With your ScanJet 3300c attached, go into
Device Manager (Start>Control Panel>System>Hardware Tab>Device Manager)
under Imaging Devices click the plus and rt.click>uninstall the Hp 3300c
driver if it exists. Else you might have a Other devices Tree, see if it's
listed under there and rt.click uninstall. Then unplug the Hp 3300c from
your machine, run Hp's install program, at the end it should prompt you to
connect the device and it should install correctly.

Here's Hp's latest driver for that device as well:
http://h20015.www2.hp.com/en/softwar...cc=us&softitem
=sj650en&prodId=hpscanjet318408&lc=en&sw_lang=en&p agetype=software
--
Tom Aaron
Microsoft Printing, Imaging and Fax Team

This posting is provided "AS IS" with no warranties, and confers no rights.

Please do not send email directly to this alias. This alias is for newsgroup
purposes only.'


"Alvin A Brown" <alvin1@swbell.net> wrote in message
news:3F96A350.1B3C678E@swbell.net...

> Hello
>
> Try talking to XP Tech Support they should be able to shed some
> lite on the issue for you
>
> Alvin
>
>
> Nils Erik Østerud wrote:
>

> > I have reasently updated my Win98 to XP and I cant make my
> > ScanJet 3300C work. I have downloaded new XP-driver for
> > the scanner fromm HP but XP won't accept it. Anyone have a
> > medecine?

>

After working off and on for over a year with the same problem as
yours, Nils, I now have found a solution. None of the HP provided
solutions (e.g., safeboot and re-install) worked for me.

I disabled Microsoft's standard service called "Windows Image
Acquisition (WIA)", with the intent of eliminating any interference it
may be causing. I did this by: clicking on Start, Run, entering
"msconfig" and clicking OK. On System Configuration Utility window,
Services Tab, enable all services and then uncheck "Windows Image
Acquisition (WIA)" which is found quite far down in the list of
services. This un-checking automatically causes a change on the
General Tab of this window from Normal Startup to Selective Startup,
with a green box (rather than a green check) in the Load System
Services item (and green checks in all the other items under Selective
Startup). Then restarted system. After startup, a window appeared
that said something like "Check here to not show and to not start up
System Configuration Utility at logon". Since this window continued
to appear at every startup, I checked the box on this window, and all
still worked correctly. [It appears that "Windows Image Acquisition
(WIA)" has no dependencies, which I confirmed by: Control Panel,
Administrative Tools, Services, right click "Windows Image Acquisition
(WIA)", properties, Dependencies tab: 'The following system components
depend on this service' <No dependencies>.]

Removing the Windows Image Acquisition (WIA) service has the following
(to me, insignificant) unintended results: In Control Panel, Scanners
and Cameras – no devices are listed (as they had been otherwise).
Under Start, right click "My Computer", properties, hardware, device
manager, imaging devices – my imaging devices show normally. A second
unintended result: the two buttons on the front of the scanner do not
start an operation. Operations can only be started from the PC
programs (scan or copy).

But the two programs, "HP PrecisionScan LT" (scan) and "HP ScanJet
Copy Utility" (copy), work!

Hope this helps, and good luck.

Don Rain


"Tom Aaron [MSFT]" <taaron@online.microsoft.com> wrote in message news:<3f96f3fa@news.microsoft.com>...

> Did you uninstall your previous Win98 driver before attempting to install
> the new XP driver you downloaded? With your ScanJet 3300c attached, go into
> Device Manager (Start>Control Panel>System>Hardware Tab>Device Manager)
> under Imaging Devices click the plus and rt.click>uninstall the Hp 3300c
> driver if it exists. Else you might have a Other devices Tree, see if it's
> listed under there and rt.click uninstall. Then unplug the Hp 3300c from
> your machine, run Hp's install program, at the end it should prompt you to
> connect the device and it should install correctly.
>
> Here's Hp's latest driver for that device as well:
> http://h20015.www2.hp.com/en/softwar...cc=us&softitem
> =sj650en&prodId=hpscanjet318408&lc=en&sw_lang=en&p agetype=software
> --
> Tom Aaron
> Microsoft Printing, Imaging and Fax Team
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> Please do not send email directly to this alias. This alias is for newsgroup
> purposes only.'
>
>
> "Alvin A Brown" <alvin1@swbell.net> wrote in message
> news:3F96A350.1B3C678E@swbell.net...

> > Hello
> >
> > Try talking to XP Tech Support they should be able to shed some
> > lite on the issue for you
> >
> > Alvin
> >
> >
> > Nils Erik Østerud wrote:
> >

> > > I have reasently updated my Win98 to XP and I cant make my
> > > ScanJet 3300C work. I have downloaded new XP-driver for
> > > the scanner fromm HP but XP won't accept it. Anyone have a
> > > medecine?

> >