Error during boot on vista installer

> Hoping this error hasn't been answered, I put mine.
>
> First, I'm french, so, by advance, excuse my language errors, thank you ;-)
>
> So, I have downloaded the Vista's ISO this afternoon and i have burned it (
> Nero 7 ) into a dvd+rw ( Philips ).
>
> My computer's configuration is :
> AMD Athlon XP 2400+
> 2.00 GHz
> RAM : 1.75 GB
>
> Graphic card : ATI radeon 9600 SERIES
>
> When I boot my pc on the dvd, I have a black screen and this : "Windows is
> loading files" with a status bar.
>
> This finished, I have this error message :
>
> "Windows did not start correctly. A recent hardware or software change might
> be the cause.
>
> File : \windows\system32\winload.exe
> Status : 0xc000035a
> Info : Attempty to load a 64-bit application, however this CPU is not
> compatible with 64-bit mode"
>
> For information, I have installed the pack "inspirat vista" few months ago
> and, thanks to my engeneer school, I have had a conference on vista. So, I
> have seen vista in action, that's why I want to test it !!!
>
> If you need more details ...
>
> Good evening
>
> Nicolas G.

> Hoping this error hasn't been answered, I put mine.
>
> First, I'm french, so, by advance, excuse my language errors, thank you ;-)
>
> So, I have downloaded the Vista's ISO this afternoon and i have burned it (
> Nero 7 ) into a dvd+rw ( Philips ).
>
> My computer's configuration is :
> AMD Athlon XP 2400+
> 2.00 GHz
> RAM : 1.75 GB
>
> Graphic card : ATI radeon 9600 SERIES
>
> When I boot my pc on the dvd, I have a black screen and this : "Windows is
> loading files" with a status bar.
>
> This finished, I have this error message :
>
> "Windows did not start correctly. A recent hardware or software change might
> be the cause.
>
> File : \windows\system32\winload.exe
> Status : 0xc000035a
> Info : Attempty to load a 64-bit application, however this CPU is not
> compatible with 64-bit mode"
>
> For information, I have installed the pack "inspirat vista" few months ago
> and, thanks to my engeneer school, I have had a conference on vista. So, I
> have seen vista in action, that's why I want to test it !!!
>
> If you need more details ...
>
> Good evening
>
> Nicolas G.

> The exact same thing happens to me. I thought it might be my nforce4
> mainboard, but not too sure. I burned mine with nero7 too in xp.
>
> I tried to install from boot and within xp to an 40bg partition, but get the
> same error.
>
> Goes though installation, copies files, restarts, loader screen comes up and
> then just dies. Sometimes i get the hardware error if doing the boot install.
>
> "Gibou" wrote:
>

> > Hoping this error hasn't been answered, I put mine.
> >
> > First, I'm french, so, by advance, excuse my language errors, thank you ;-)
> >
> > So, I have downloaded the Vista's ISO this afternoon and i have burned it (
> > Nero 7 ) into a dvd+rw ( Philips ).
> >
> > My computer's configuration is :
> > AMD Athlon XP 2400+
> > 2.00 GHz
> > RAM : 1.75 GB
> >
> > Graphic card : ATI radeon 9600 SERIES
> >
> > When I boot my pc on the dvd, I have a black screen and this : "Windows is
> > loading files" with a status bar.
> >
> > This finished, I have this error message :
> >
> > "Windows did not start correctly. A recent hardware or software change might
> > be the cause.
> >
> > File : \windows\system32\winload.exe
> > Status : 0xc000035a
> > Info : Attempty to load a 64-bit application, however this CPU is not
> > compatible with 64-bit mode"
> >
> > For information, I have installed the pack "inspirat vista" few months ago
> > and, thanks to my engeneer school, I have had a conference on vista. So, I
> > have seen vista in action, that's why I want to test it !!!
> >
> > If you need more details ...
> >
> > Good evening
> >
> > Nicolas G.

> The exact same thing happens to me. I thought it might be my nforce4
> mainboard, but not too sure. I burned mine with nero7 too in xp.
>
> I tried to install from boot and within xp to an 40bg partition, but get the
> same error.
>
> Goes though installation, copies files, restarts, loader screen comes up and
> then just dies. Sometimes i get the hardware error if doing the boot install.
>
> "Gibou" wrote:
>

> > Hoping this error hasn't been answered, I put mine.
> >
> > First, I'm french, so, by advance, excuse my language errors, thank you ;-)
> >
> > So, I have downloaded the Vista's ISO this afternoon and i have burned it (
> > Nero 7 ) into a dvd+rw ( Philips ).
> >
> > My computer's configuration is :
> > AMD Athlon XP 2400+
> > 2.00 GHz
> > RAM : 1.75 GB
> >
> > Graphic card : ATI radeon 9600 SERIES
> >
> > When I boot my pc on the dvd, I have a black screen and this : "Windows is
> > loading files" with a status bar.
> >
> > This finished, I have this error message :
> >
> > "Windows did not start correctly. A recent hardware or software change might
> > be the cause.
> >
> > File : \windows\system32\winload.exe
> > Status : 0xc000035a
> > Info : Attempty to load a 64-bit application, however this CPU is not
> > compatible with 64-bit mode"
> >
> > For information, I have installed the pack "inspirat vista" few months ago
> > and, thanks to my engeneer school, I have had a conference on vista. So, I
> > have seen vista in action, that's why I want to test it !!!
> >
> > If you need more details ...
> >
> > Good evening
> >
> > Nicolas G.

> The exact same thing happens to me. I thought it might be my nforce4
> mainboard, but not too sure. I burned mine with nero7 too in xp.
>
> I tried to install from boot and within xp to an 40bg partition, but get the
> same error.
>
> Goes though installation, copies files, restarts, loader screen comes up and
> then just dies. Sometimes i get the hardware error if doing the boot install.
>
> "Gibou" wrote:
>

> > Hoping this error hasn't been answered, I put mine.
> >
> > First, I'm french, so, by advance, excuse my language errors, thank you ;-)
> >
> > So, I have downloaded the Vista's ISO this afternoon and i have burned it (
> > Nero 7 ) into a dvd+rw ( Philips ).
> >
> > My computer's configuration is :
> > AMD Athlon XP 2400+
> > 2.00 GHz
> > RAM : 1.75 GB
> >
> > Graphic card : ATI radeon 9600 SERIES
> >
> > When I boot my pc on the dvd, I have a black screen and this : "Windows is
> > loading files" with a status bar.
> >
> > This finished, I have this error message :
> >
> > "Windows did not start correctly. A recent hardware or software change might
> > be the cause.
> >
> > File : \windows\system32\winload.exe
> > Status : 0xc000035a
> > Info : Attempty to load a 64-bit application, however this CPU is not
> > compatible with 64-bit mode"
> >
> > For information, I have installed the pack "inspirat vista" few months ago
> > and, thanks to my engeneer school, I have had a conference on vista. So, I
> > have seen vista in action, that's why I want to test it !!!
> >
> > If you need more details ...
> >
> > Good evening
> >
> > Nicolas G.

> I have the same problem with My Asus K8N-E Delluxe (Nforce4) motherboard.
> Does anyone already have a solution> The strange thing is that when I install
> it on my MSI K8N Diamond deluxe with for the rest almost the same hardware
> components as my Asus board the installation works just fine. My specs of
> both systems are
>
> Asus: 1 x 300 Gb Maxtor SATA drive, AMD 64 3000+ processor, 2 x 1 Gb
> kingston memory, Geforce 6600LE video with 256 Mb memory, Hauppauge MCE500
> TV-card.
> MSI: 2 x 300 Gb Seagate barracuda harddisk, AMD 64 3200+ processor, 2 x 1 Gb
> kingston memory, Geforce 7600GT with 256 Mb memory, Hauppauge MCE500 tv-card
>
>
> "Ian" wrote:
>

> > The exact same thing happens to me. I thought it might be my nforce4
> > mainboard, but not too sure. I burned mine with nero7 too in xp.
> >
> > I tried to install from boot and within xp to an 40bg partition, but get the
> > same error.
> >
> > Goes though installation, copies files, restarts, loader screen comes up and
> > then just dies. Sometimes i get the hardware error if doing the boot install.
> >
> > "Gibou" wrote:
> >

> > > Hoping this error hasn't been answered, I put mine.
> > >
> > > First, I'm french, so, by advance, excuse my language errors, thank you ;-)
> > >
> > > So, I have downloaded the Vista's ISO this afternoon and i have burned it (
> > > Nero 7 ) into a dvd+rw ( Philips ).
> > >
> > > My computer's configuration is :
> > > AMD Athlon XP 2400+
> > > 2.00 GHz
> > > RAM : 1.75 GB
> > >
> > > Graphic card : ATI radeon 9600 SERIES
> > >
> > > When I boot my pc on the dvd, I have a black screen and this : "Windows is
> > > loading files" with a status bar.
> > >
> > > This finished, I have this error message :
> > >
> > > "Windows did not start correctly. A recent hardware or software change might
> > > be the cause.
> > >
> > > File : \windows\system32\winload.exe
> > > Status : 0xc000035a
> > > Info : Attempty to load a 64-bit application, however this CPU is not
> > > compatible with 64-bit mode"
> > >
> > > For information, I have installed the pack "inspirat vista" few months ago
> > > and, thanks to my engeneer school, I have had a conference on vista. So, I
> > > have seen vista in action, that's why I want to test it !!!
> > >
> > > If you need more details ...
> > >
> > > Good evening
> > >
> > > Nicolas G.

> maybe it's a problem with NForce4 Boards?
>
> "ReMeE" wrote:
>

> > I have the same problem with My Asus K8N-E Delluxe (Nforce4) motherboard.
> > Does anyone already have a solution> The strange thing is that when I install
> > it on my MSI K8N Diamond deluxe with for the rest almost the same hardware
> > components as my Asus board the installation works just fine. My specs of
> > both systems are
> >
> > Asus: 1 x 300 Gb Maxtor SATA drive, AMD 64 3000+ processor, 2 x 1 Gb
> > kingston memory, Geforce 6600LE video with 256 Mb memory, Hauppauge MCE500
> > TV-card.
> > MSI: 2 x 300 Gb Seagate barracuda harddisk, AMD 64 3200+ processor, 2 x 1 Gb
> > kingston memory, Geforce 7600GT with 256 Mb memory, Hauppauge MCE500 tv-card
> >
> >
> > "Ian" wrote:
> >

> > > The exact same thing happens to me. I thought it might be my nforce4
> > > mainboard, but not too sure. I burned mine with nero7 too in xp.
> > >
> > > I tried to install from boot and within xp to an 40bg partition, but get the
> > > same error.
> > >
> > > Goes though installation, copies files, restarts, loader screen comes up and
> > > then just dies. Sometimes i get the hardware error if doing the boot install.
> > >
> > > "Gibou" wrote:
> > >
> > > > Hoping this error hasn't been answered, I put mine.
> > > >
> > > > First, I'm french, so, by advance, excuse my language errors, thank you ;-)
> > > >
> > > > So, I have downloaded the Vista's ISO this afternoon and i have burned it (
> > > > Nero 7 ) into a dvd+rw ( Philips ).
> > > >
> > > > My computer's configuration is :
> > > > AMD Athlon XP 2400+
> > > > 2.00 GHz
> > > > RAM : 1.75 GB
> > > >
> > > > Graphic card : ATI radeon 9600 SERIES
> > > >
> > > > When I boot my pc on the dvd, I have a black screen and this : "Windows is
> > > > loading files" with a status bar.
> > > >
> > > > This finished, I have this error message :
> > > >
> > > > "Windows did not start correctly. A recent hardware or software change might
> > > > be the cause.
> > > >
> > > > File : \windows\system32\winload.exe
> > > > Status : 0xc000035a
> > > > Info : Attempty to load a 64-bit application, however this CPU is not
> > > > compatible with 64-bit mode"
> > > >
> > > > For information, I have installed the pack "inspirat vista" few months ago
> > > > and, thanks to my engeneer school, I have had a conference on vista. So, I
> > > > have seen vista in action, that's why I want to test it !!!
> > > >
> > > > If you need more details ...
> > > >
> > > > Good evening
> > > >
> > > > Nicolas G.

> I have the same problem with My Asus K8N-E Delluxe (Nforce4) motherboard.
> Does anyone already have a solution> The strange thing is that when I install
> it on my MSI K8N Diamond deluxe with for the rest almost the same hardware
> components as my Asus board the installation works just fine. My specs of
> both systems are
>
> Asus: 1 x 300 Gb Maxtor SATA drive, AMD 64 3000+ processor, 2 x 1 Gb
> kingston memory, Geforce 6600LE video with 256 Mb memory, Hauppauge MCE500
> TV-card.
> MSI: 2 x 300 Gb Seagate barracuda harddisk, AMD 64 3200+ processor, 2 x 1 Gb
> kingston memory, Geforce 7600GT with 256 Mb memory, Hauppauge MCE500 tv-card
>
>
> "Ian" wrote:
>
>

>>The exact same thing happens to me. I thought it might be my nforce4
>>mainboard, but not too sure. I burned mine with nero7 too in xp.
>>
>>I tried to install from boot and within xp to an 40bg partition, but get the
>>same error.
>>
>>Goes though installation, copies files, restarts, loader screen comes up and
>>then just dies. Sometimes i get the hardware error if doing the boot install.
>>
>>"Gibou" wrote:
>>
>>

>>>Hoping this error hasn't been answered, I put mine.
>>>
>>>First, I'm french, so, by advance, excuse my language errors, thank you ;-)
>>>
>>>So, I have downloaded the Vista's ISO this afternoon and i have burned it (
>>>Nero 7 ) into a dvd+rw ( Philips ).
>>>
>>>My computer's configuration is :
>>>AMD Athlon XP 2400+
>>>2.00 GHz
>>>RAM : 1.75 GB
>>>
>>>Graphic card : ATI radeon 9600 SERIES
>>>
>>>When I boot my pc on the dvd, I have a black screen and this : "Windows is
>>>loading files" with a status bar.
>>>
>>>This finished, I have this error message :
>>>
>>>"Windows did not start correctly. A recent hardware or software change might
>>>be the cause.
>>>
>>>File : \windows\system32\winload.exe
>>>Status : 0xc000035a
>>>Info : Attempty to load a 64-bit application, however this CPU is not
>>>compatible with 64-bit mode"
>>>
>>>For information, I have installed the pack "inspirat vista" few months ago
>>>and, thanks to my engeneer school, I have had a conference on vista. So, I
>>>have seen vista in action, that's why I want to test it !!!
>>>
>>>If you need more details ...
>>>
>>>Good evening
>>>
>>>Nicolas G.