dmc113
Guest
Posts: n/a
 
error messages
Posted: 01-16-2004, 08:01 PM
I have Windows XP Home edition. i have had no trouble, until about a month ago when my PC was left on all night. i hav run several diagnostic tests, but PC is still going slow. When I select 'start', or 'control panel' or any other function, it takes anywhere from 5 - 10 minutes for the computer to react...and it takes at least that long after I shut the computer down for it to actually turn off completely.
I wrote down the error messages that come up every time I turn the PC on...
-DLL C:\WINDOWS\System32\msjet35.dll is not a valid Windows image
-Application failed to initialize properly (0xc0000005)
-DLL C:\Program Files\Common Files\System\Ole DB\OLEDB32R.DLL is not a valid Windows image
-Failure to load resource DLL C:\Program Files\Common Files\System\Ole DB\OLEDB32R.DLL
-SPRINGFLD_ADV_DAEMON: mswkscal.exe - Bad Image OLEDB32.DLL
-Calendar can't find one or more files it needs to run
-DLL C:\Program Files\MSN\MSNCoreFiles\micore.dll is not a valid Windows image (msn6.exe)
Any help would be greatly appreciated!
Yves Leclerc
Guest
Posts: n/a
 
Re: error messages
Posted: 01-16-2004, 08:12 PM
Before you do anything else:

1) Run an up to date anti-virus software and scan your system for any
possible viruses. Clean up any viruses found.

2) Run a spyware/malware removal software. Ad-Aware 6 and Spybot are two
softwares of this type. Clean off any spyware/malware found.

3) Install a firewall between your PC and your Internet connection. This
should stop other people from accessing your PC from your Internet
connection.

Then, you could do a repair re-install of your XP.

Y.

"dmc113" <[email protected]> wrote in message
news:[email protected]..
> I have Windows XP Home edition. i have had no trouble, until about a
month ago when my PC was left on all night. i hav run several diagnostic
tests, but PC is still going slow. When I select 'start', or 'control
panel' or any other function, it takes anywhere from 5 - 10 minutes for the
computer to react...and it takes at least that long after I shut the
computer down for it to actually turn off completely.
> I wrote down the error messages that come up every time I turn the PC
on...
> -DLL C:\WINDOWS\System32\msjet35.dll is not a valid Windows image
> -Application failed to initialize properly (0xc0000005)
> -DLL C:\Program Files\Common Files\System\Ole DB\OLEDB32R.DLL is not a
valid Windows image
> -Failure to load resource DLL C:\Program Files\Common Files\System\Ole
DB\OLEDB32R.DLL
> -SPRINGFLD_ADV_DAEMON: mswkscal.exe - Bad Image OLEDB32.DLL
> -Calendar can't find one or more files it needs to run
> -DLL C:\Program Files\MSN\MSNCoreFiles\micore.dll is not a valid Windows
image (msn6.exe)
> Any help would be greatly appreciated!

[email protected]
Guest
Posts: n/a
 
Re: error messages
Posted: 01-16-2004, 08:31 PM
i have run Norton anti-virus. no viruses found

----- Yves Leclerc wrote: ----

Before you do anything else

1) Run an up to date anti-virus software and scan your system for an
possible viruses. Clean up any viruses found

2) Run a spyware/malware removal software. Ad-Aware 6 and Spybot are tw
softwares of this type. Clean off any spyware/malware found

3) Install a firewall between your PC and your Internet connection. Thi
should stop other people from accessing your PC from your Interne
connection

Then, you could do a repair re-install of your XP

Y

"dmc113" <[email protected]> wrote in messag
news:[email protected].
> I have Windows XP Home edition. i have had no trouble, until about
month ago when my PC was left on all night. i hav run several diagnosti
tests, but PC is still going slow. When I select 'start', or 'contro
panel' or any other function, it takes anywhere from 5 - 10 minutes for th
computer to react...and it takes at least that long after I shut th
computer down for it to actually turn off completely
> I wrote down the error messages that come up every time I turn the P
on..
> -DLL C:\WINDOWS\System32\msjet35.dll is not a valid Windows imag
> -Application failed to initialize properly (0xc0000005
> -DLL C:\Program Files\Common Files\System\Ole DB\OLEDB32R.DLL is not
valid Windows imag
> -Failure to load resource DLL C:\Program Files\Common Files\System\Ol
DB\OLEDB32R.DL
> -SPRINGFLD_ADV_DAEMON: mswkscal.exe - Bad Image OLEDB32.DL
> -Calendar can't find one or more files it needs to ru
> -DLL C:\Program Files\MSN\MSNCoreFiles\micore.dll is not a valid Window
image (msn6.exe
> Any help would be greatly appreciated


Yves Leclerc
Guest
Posts: n/a
 
Re: error messages
Posted: 01-16-2004, 09:11 PM
Did you check for any spyware/malware software?

Y.

"[email protected]" <[email protected]> wrote in message
news:[email protected]..
> i have run Norton anti-virus. no viruses found.
>
> ----- Yves Leclerc wrote: -----
>
> Before you do anything else:
>
> 1) Run an up to date anti-virus software and scan your system for
any
> possible viruses. Clean up any viruses found.
>
> 2) Run a spyware/malware removal software. Ad-Aware 6 and Spybot are
two
> softwares of this type. Clean off any spyware/malware found.
>
> 3) Install a firewall between your PC and your Internet connection.
This
> should stop other people from accessing your PC from your Internet
> connection.
>
> Then, you could do a repair re-install of your XP.
>
> Y.
>
> "dmc113" <[email protected]> wrote in message
> news:[email protected]..
> > I have Windows XP Home edition. i have had no trouble, until about
a
> month ago when my PC was left on all night. i hav run several
diagnostic
> tests, but PC is still going slow. When I select 'start', or
'control
> panel' or any other function, it takes anywhere from 5 - 10 minutes
for the
> computer to react...and it takes at least that long after I shut the
> computer down for it to actually turn off completely.
> > I wrote down the error messages that come up every time I turn the
PC
> on...
> > -DLL C:\WINDOWS\System32\msjet35.dll is not a valid Windows image
> > -Application failed to initialize properly (0xc0000005)
> > -DLL C:\Program Files\Common Files\System\Ole DB\OLEDB32R.DLL is
not a
> valid Windows image
> > -Failure to load resource DLL C:\Program Files\Common
Files\System\Ole
> DB\OLEDB32R.DLL
> > -SPRINGFLD_ADV_DAEMON: mswkscal.exe - Bad Image OLEDB32.DLL
> > -Calendar can't find one or more files it needs to run
> > -DLL C:\Program Files\MSN\MSNCoreFiles\micore.dll is not a valid
Windows
> image (msn6.exe)
> > Any help would be greatly appreciated!
>
>
>

[email protected]
Guest
Posts: n/a
 
Error Messages
Posted: 05-17-2004, 01:25 AM
I use XP Pro,when I start-up my computer I get an error
message that reads " Cannot connect to file system,system
not running." How can I fix this?
carlos
Guest
Posts: n/a
 
error messages
Posted: 05-26-2004, 08:07 AM
i am getting error messages to atach a debugging tool
can anyone help

Bruce Lawrence
Guest
Posts: n/a
 
Error messages
Posted: 06-01-2004, 10:02 PM
Can someone explain this message:
Microsoft Windows:
The system has recovered from a serious error.

A log of the error has been created.

Error Signature:

BCCode: 1000008e BCP1: C0000005 BCP2: F8C38966

BCP3: F80C3020 BCP4: 00000000 OSVer: 5_1_2600

SP: 1:1_0 Product 256_1

Files:

C:\\WINDOWS\Minidump\Mini051804-01.dmp

C:\\WINDOWS\TEMP\WER4.tmp.dir00\sysdata.xml


Thanks
Bruce


Rick \Nutcase\ Rogers
Guest
Posts: n/a
 
Re: Error messages
Posted: 06-02-2004, 12:29 AM
Frequently seen by users of a Creative sound card, the solution is to update
the drivers from the manufacturer (meaning not Windows Update).

--
Best of Luck,

Rick Rogers aka "Nutcase" MS-MVP - Windows
Windows isn't rocket science! That's my other hobby!
http://mvp.support.microsoft.com/
Associate Expert - WinXP - Expert Zone
www.microsoft.com/windowsxp/expertzone
Win98 Help - www.rickrogers.org

"Bruce Lawrence" <[email protected]> wrote in message
news:[email protected]..
> Can someone explain this message:
> Microsoft Windows:
> The system has recovered from a serious error.
>
> A log of the error has been created.
>
> Error Signature:
>
> BCCode: 1000008e BCP1: C0000005 BCP2: F8C38966
>
> BCP3: F80C3020 BCP4: 00000000 OSVer: 5_1_2600
>
> SP: 1:1_0 Product 256_1
>
> Files:
>
> C:\\WINDOWS\Minidump\Mini051804-01.dmp
>
> C:\\WINDOWS\TEMP\WER4.tmp.dir00\sysdata.xml
>
>
> Thanks
> Bruce
>
>

 
LinkBack Thread Tools Display Modes
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can't Import OE 6 messages Tom Lake Windows Vista Mail 10 09-26-2006 06:10 PM
Replying to Messages Error/Bug Butler DJ Windows Vista Mail 1 07-28-2006 07:36 AM
HTML Messages Diego Windows Vista Mail 3 07-25-2006 01:49 AM
Network messages Rex Geissinger Windows Vista Networking & Sharing 3 07-06-2006 11:31 PM
Blank Messages Mildred Savalier Windows Vista Mail 8 06-22-2006 11:08 PM