Found New Hardware Wizard can't find CD driver
Guest
Posts: n/a
Posts: n/a
reports "New Hardware Found" but then can not find a
driver for it buy searching itself, the Internet or Win
XP CD. Now it also started doing the same thing for the
old CD-ROM drive which was performing normally.
First I connected on secondary channel as Slave and CD-
ROM as Master. I
tried it on its own
as Master. Then I changed CD-RW as Master and CD-ROM as
slave, both on the
Secondary channel.
In Windows Explorer both are listed and I can read the
files stored on CDs.
In Device Manager they are both listed as "... working
OK". CD-ROM slave
location is shown as 1(1) but the location for CD-RW is
shown as 0(0), same
as the HDD. I would expect it to be 0(1). Am I right?
What can I do to stop Windows finding a "New Hardware"
everytime I switch
on, and is the "location" data correct, if not what can I
do to change it?
Now I removed the new drive and old CD-ROM drive gives
the same problem. Everything works OK except windows keep
trying to install a new driver every time I start windows.
I am using Win XP Pro adn Pentium 4
Threaded Mode
