HP all in one T series and WINXP problem

Posted: 12-29-2003, 11:31 AM

Karolus des Reyches197

Guest
Posts: n/a

My daughter has the HP T45 all in one Printer and even after we

> >downloaded
> >> >the latest driver from the HP site it does not work for Print .
> >Installation
> >> >of driver went smoothly after we first un-installed the previous

driver,

> >in
> >> >fact, deleted the HP all in one Printer. Then re-installed with the XP
> >> >driver from the HP site. It puts the HP all in one printer in the

Control

> >> >panel and the Fax portion works fine. The copy portion is VERY, VERY

slow

> >> >and the print does not work at all.
> >> >
> >> >Connections are firm, got new Belkin bi-directional cable. Still no

go.

> >> >
> >> >It worked fine under Windows 98SE.
> >> >
> >> >Anybody has a fix for this?

LPT1 port is enabled, ECP OK. New cables, bi-directional OK.

What else??????

Responses to "HP all in one T series and WINXP problem"

Tavia

Guest
Posts: n/a

HP all in one T series and WINXP problem

Posted: 12-29-2003, 03:17 PM

Try using the add printer wizard and installing it
yourself manually - If T45 is not listed select an HP
deskjet 550 which is a generic windows driver.

You may want to also reset the unit - Unplug the power,
press and hold # and 3 - while pressing # 3 plug the power
back in without releasing the buttons, release when you
see partial reset in the window.

>-----Original Message-----
>My daughter has the HP T45 all in one Printer and even

after we

>> >downloaded
>> >> >the latest driver from the HP site it does not work

for Print .

>> >Installation
>> >> >of driver went smoothly after we first un-installed

the previous

>driver,

>> >in
>> >> >fact, deleted the HP all in one Printer. Then re-

installed with the XP

>> >> >driver from the HP site. It puts the HP all in one

printer in the

>Control

>> >> >panel and the Fax portion works fine. The copy

portion is VERY, VERY

>slow

>> >> >and the print does not work at all.
>> >> >
>> >> >Connections are firm, got new Belkin bi-directional

cable. Still no

>go.

>> >> >
>> >> >It worked fine under Windows 98SE.
>> >> >
>> >> >Anybody has a fix for this?

>
>LPT1 port is enabled, ECP OK. New cables, bi-directional

OK.

>
>What else??????
>
>
>.
>

Cari MS-MVP

Guest
Posts: n/a

Re: HP all in one T series and WINXP problem

Posted: 12-30-2003, 07:28 AM

Try setting the LPT port in the BIOS to EPP, not ECP.

Cari
www.coribright.com

"Karolus des Reyches197" <Ritter197@Comcast.net> wrote in message
news:OUKI%238fzDHA.2456@TK2MSFTNGP10.phx.gbl...

> My daughter has the HP T45 all in one Printer and even after we

>> >downloaded
>> >> >the latest driver from the HP site it does not work for Print .
>> >Installation
>> >> >of driver went smoothly after we first un-installed the previous

> driver,

>> >in
>> >> >fact, deleted the HP all in one Printer. Then re-installed with the
>> >> >XP
>> >> >driver from the HP site. It puts the HP all in one printer in the

> Control

>> >> >panel and the Fax portion works fine. The copy portion is VERY, VERY

> slow

>> >> >and the print does not work at all.
>> >> >
>> >> >Connections are firm, got new Belkin bi-directional cable. Still no

> go.

>> >> >
>> >> >It worked fine under Windows 98SE.
>> >> >
>> >> >Anybody has a fix for this?

>
> LPT1 port is enabled, ECP OK. New cables, bi-directional OK.
>
> What else??????
>
>

Karolus des Reyches197

Guest
Posts: n/a

Re: HP all in one T series and WINXP problem

Posted: 01-01-2004, 05:42 PM

I see nothing in the BIOS to set it to either EPP or ECP.

"Cari MS-MVP" <Newsgroups1@coribright.comn> wrote in message
news:utpqNaqzDHA.604@tk2msftngp13.phx.gbl...

> Try setting the LPT port in the BIOS to EPP, not ECP.
>
> Cari
> www.coribright.com
>
> "Karolus des Reyches197" <Ritter197@Comcast.net> wrote in message
> news:OUKI%238fzDHA.2456@TK2MSFTNGP10.phx.gbl...
> > My daughter has the HP T45 all in one Printer and even after we
> >> >downloaded
> >> >> >the latest driver from the HP site it does not work for Print .
> >> >Installation
> >> >> >of driver went smoothly after we first un-installed the previous
> > driver,
> >> >in
> >> >> >fact, deleted the HP all in one Printer. Then re-installed with the
> >> >> >XP
> >> >> >driver from the HP site. It puts the HP all in one printer in the
> > Control
> >> >> >panel and the Fax portion works fine. The copy portion is VERY,

VERY

> > slow
> >> >> >and the print does not work at all.
> >> >> >
> >> >> >Connections are firm, got new Belkin bi-directional cable. Still no
> > go.
> >> >> >
> >> >> >It worked fine under Windows 98SE.
> >> >> >
> >> >> >Anybody has a fix for this?
> >
> > LPT1 port is enabled, ECP OK. New cables, bi-directional OK.
> >
> > What else??????
> >
> >
>
>

Guest
Posts: n/a

Re: HP all in one T series and WINXP problem

Posted: 01-07-2004, 05:53 PM

I am following this posting because I'm having the same
problem. When I download the XP driver for this printer,
it tells me there are XP .sys files missing. But I am
also not able to change my LPT port to ECP or EPP because
I can't enter BIOS when I boot the computer (nothing
happens when I press F2 as instructed to enter setup).
Help!

>-----Original Message-----
>I see nothing in the BIOS to set it to either EPP or ECP.
>
>"Cari MS-MVP" <Newsgroups1@coribright.comn> wrote in

message

>news:utpqNaqzDHA.604@tk2msftngp13.phx.gbl...
>> Try setting the LPT port in the BIOS to EPP, not ECP.
>>
>> Cari
>> www.coribright.com
>>
>> "Karolus des Reyches197" <Ritter197@Comcast.net> wrote

in message

>> news:OUKI%238fzDHA.2456@TK2MSFTNGP10.phx.gbl...
>> > My daughter has the HP T45 all in one Printer and

even after we

>> >> >downloaded
>> >> >> >the latest driver from the HP site it does not

work for Print .

>> >> >Installation
>> >> >> >of driver went smoothly after we first un-

installed the previous

>> > driver,
>> >> >in
>> >> >> >fact, deleted the HP all in one Printer. Then re-

installed with the

>> >> >> >XP
>> >> >> >driver from the HP site. It puts the HP all in

one printer in the

>> > Control
>> >> >> >panel and the Fax portion works fine. The copy

portion is VERY,

>VERY

>> > slow
>> >> >> >and the print does not work at all.
>> >> >> >
>> >> >> >Connections are firm, got new Belkin bi-

directional cable. Still no

>> > go.
>> >> >> >
>> >> >> >It worked fine under Windows 98SE.
>> >> >> >
>> >> >> >Anybody has a fix for this?
>> >
>> > LPT1 port is enabled, ECP OK. New cables, bi-

directional OK.

>> >
>> > What else??????
>> >
>> >
>>
>>
>
>
>.
>

Cari $MS-MVP$

Guest
Posts: n/a

Re: HP all in one T series and WINXP problem

Posted: 01-07-2004, 09:46 PM

Check your PC manual to ensure that it is F2 you are supposed to be
pressing.... BIOS keypresses differ from PC to PC.

Once the LPT port is set at EPP, if the problem still exists, do a COMPLETE
unisntall and reinstall of the printer as per
http://www.coribright.com/Windows/Article%20One.htm

Cari
www.coribright.com

<anonymous@discussions.microsoft.com> wrote in message
news:4b3901c3d547$271b7110$7d02280a@phx.gbl...

>I am following this posting because I'm having the same
> problem. When I download the XP driver for this printer,
> it tells me there are XP .sys files missing. But I am
> also not able to change my LPT port to ECP or EPP because
> I can't enter BIOS when I boot the computer (nothing
> happens when I press F2 as instructed to enter setup).
> Help!
>
>>-----Original Message-----
>>I see nothing in the BIOS to set it to either EPP or ECP.
>>
>>"Cari MS-MVP" <Newsgroups1@coribright.comn> wrote in
> message
>>news:utpqNaqzDHA.604@tk2msftngp13.phx.gbl...
>>> Try setting the LPT port in the BIOS to EPP, not ECP.
>>>
>>> Cari
>>> www.coribright.com
>>>
>>> "Karolus des Reyches197" <Ritter197@Comcast.net> wrote

> in message

>>> news:OUKI%238fzDHA.2456@TK2MSFTNGP10.phx.gbl...
>>> > My daughter has the HP T45 all in one Printer and

> even after we

>>> >> >downloaded
>>> >> >> >the latest driver from the HP site it does not

> work for Print .

>>> >> >Installation
>>> >> >> >of driver went smoothly after we first un-

> installed the previous

>>> > driver,
>>> >> >in
>>> >> >> >fact, deleted the HP all in one Printer. Then re-

> installed with the

>>> >> >> >XP
>>> >> >> >driver from the HP site. It puts the HP all in

> one printer in the

>>> > Control
>>> >> >> >panel and the Fax portion works fine. The copy

> portion is VERY,
>>VERY
>>> > slow
>>> >> >> >and the print does not work at all.
>>> >> >> >
>>> >> >> >Connections are firm, got new Belkin bi-

> directional cable. Still no

>>> > go.
>>> >> >> >
>>> >> >> >It worked fine under Windows 98SE.
>>> >> >> >
>>> >> >> >Anybody has a fix for this?
>>> >
>>> > LPT1 port is enabled, ECP OK. New cables, bi-

> directional OK.

>>> >
>>> > What else??????
>>> >
>>> >
>>>
>>>
>>
>>
>>.
>>

LinkBack

Thread Tools

Display Modes

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Windows Media Series 9 Avi problem	Chris Barrett	Windows XP Video	4	04-14-2004 11:42 PM
Lexmark 1100 series scanner problem	kathi	Windows XP Device Drivers	1	12-11-2003 06:26 PM
windows media player 9 series full screen problem	andrew	Windows XP Video	1	11-09-2003 04:53 PM
Fujitsu N Series 3010 laptop and USB Mouse Problem	Dave K.	Windows XP Setup	0	09-24-2003 01:04 AM
HP D Series Fax Problem with Multiple Users	Micheal Halloran	Windows XP Printers / Scanners / Fax	0	09-06-2003 03:46 AM