Install Vista with problem (can't detect any disk)

I got ATA i think Disk: MAXTOR 6Y120L0

"Jane C" wrote:

> Is your hard drive on a SATA controller? There is an option to load SATA
> controller drivers during install via a "Load Driver" button.
>
> --
> Jane, not plain 64bit enabled
> Batteries not included. Braincell on vacation.
> "CHRUXIOS" <CHRUXIOS@discussions.microsoft.com> wrote in message
> news:960B4F34-A207-48AB-B23F-8321E1913E4A@microsoft.com...

> > (continue this subject plz)
> >
> > Chruxios Wrote:

> >> > > first my specs
> >> > > ....
> >> > > Mainboard : Soltek SL-75FRN-L ( AMD Athlon XP 2500+ , 1,84 GHZ)
> >> > > Ram : 1GB
> >> > > Harddisk : Maxtor 6Y120L0 (120 GB)
> >> > >
> >> > > (this is all u need to know i think)
> >> > > ----
> >> > >
> >> > > Oke this is my problem.
> >> > > i set my Harddisk in 3 partitions with the program called maxblaster
> >> > > 4.
> >> > > so i begin install Windows Vista with DDO (Dynamic Disk Overlay)
> >> > > and i select my partition and it begins installing but when it's done
> >> > > DDO
> >> > > is
> >> > > gone and windows won't start. It says something with defragment disk.
> >> > > but i think it's because DDO is gone.
> >> > >
> >> > > So plz help me step by step.
> >> > >
> >> > > (ps: I updated my bios to the latest version)

> >
> > "Peter M" wrote:
> >

> >> > Get rid of dynamic overlay. Thats main problem number one. It's only
> >> > used
> >> > for old motherboards that dont support large disks. Your board is a
> >> > nforce2
> >> > which has no problem with large disk drives. You'll have to search how
> >> > to
> >> > uninstall DDO unless you can from maxblast. Just use maxblast to
> >> > partition
> >> > without DDO and then try vista again.

> >
> > "CHRUXIOS" wrote:
> >

> >> Humf i tried to install vista on my harddisk without the DDO but than
> >> it's
> >> says it can't detect a hard disk ... but DDO was installed but i can
> >> always
> >> try to uninstall DDO and try to install vista again ..
> >>
> >> thnx i give a try

> >
> > Diddn't work this is wot i did i set up my partition with maxblaster 4
> > uninstall DDO tried to install Vista and this is the message i get :
> > "Setup
> > could not get information about the disk on your computer
> >

>
>
>

one step father i did the option "zero full drive" so Vista can detect hard
drive now but it only shows me 31.5 GB

"CHRUXIOS" wrote:

> I got ATA i think Disk: MAXTOR 6Y120L0
>
> "Jane C" wrote:
>

> > Is your hard drive on a SATA controller? There is an option to load SATA
> > controller drivers during install via a "Load Driver" button.
> >
> > --
> > Jane, not plain 64bit enabled
> > Batteries not included. Braincell on vacation.
> > "CHRUXIOS" <CHRUXIOS@discussions.microsoft.com> wrote in message
> > news:960B4F34-A207-48AB-B23F-8321E1913E4A@microsoft.com...

> > > (continue this subject plz)
> > >
> > > Chruxios Wrote:
> > >> > > first my specs
> > >> > > ....
> > >> > > Mainboard : Soltek SL-75FRN-L ( AMD Athlon XP 2500+ , 1,84 GHZ)
> > >> > > Ram : 1GB
> > >> > > Harddisk : Maxtor 6Y120L0 (120 GB)
> > >> > >
> > >> > > (this is all u need to know i think)
> > >> > > ----
> > >> > >
> > >> > > Oke this is my problem.
> > >> > > i set my Harddisk in 3 partitions with the program called maxblaster
> > >> > > 4.
> > >> > > so i begin install Windows Vista with DDO (Dynamic Disk Overlay)
> > >> > > and i select my partition and it begins installing but when it's done
> > >> > > DDO
> > >> > > is
> > >> > > gone and windows won't start. It says something with defragment disk.
> > >> > > but i think it's because DDO is gone.
> > >> > >
> > >> > > So plz help me step by step.
> > >> > >
> > >> > > (ps: I updated my bios to the latest version)
> > >
> > > "Peter M" wrote:
> > >
> > >> > Get rid of dynamic overlay. Thats main problem number one. It's only
> > >> > used
> > >> > for old motherboards that dont support large disks. Your board is a
> > >> > nforce2
> > >> > which has no problem with large disk drives. You'll have to search how
> > >> > to
> > >> > uninstall DDO unless you can from maxblast. Just use maxblast to
> > >> > partition
> > >> > without DDO and then try vista again.
> > >
> > > "CHRUXIOS" wrote:
> > >
> > >> Humf i tried to install vista on my harddisk without the DDO but than
> > >> it's
> > >> says it can't detect a hard disk ... but DDO was installed but i can
> > >> always
> > >> try to uninstall DDO and try to install vista again ..
> > >>
> > >> thnx i give a try
> > >
> > > Diddn't work this is wot i did i set up my partition with maxblaster 4
> > > uninstall DDO tried to install Vista and this is the message i get :
> > > "Setup
> > > could not get information about the disk on your computer
> > >

> >
> >
> >

Is it formatted FAT32?

"CHRUXIOS" <CHRUXIOS@discussions.microsoft.com> wrote in message
news:27388E43-F4AF-48B7-91E6-C99F7213C376@microsoft.com...

> one step father i did the option "zero full drive" so Vista can detect
> hard
> drive now but it only shows me 31.5 GB
>
> "CHRUXIOS" wrote:
>

>> I got ATA i think Disk: MAXTOR 6Y120L0
>>
>> "Jane C" wrote:
>>

>> > Is your hard drive on a SATA controller? There is an option to load
>> > SATA
>> > controller drivers during install via a "Load Driver" button.
>> >
>> > --
>> > Jane, not plain 64bit enabled
>> > Batteries not included. Braincell on vacation.
>> > "CHRUXIOS" <CHRUXIOS@discussions.microsoft.com> wrote in message
>> > news:960B4F34-A207-48AB-B23F-8321E1913E4A@microsoft.com...
>> > > (continue this subject plz)
>> > >
>> > > Chruxios Wrote:
>> > >> > > first my specs
>> > >> > > ....
>> > >> > > Mainboard : Soltek SL-75FRN-L ( AMD Athlon XP 2500+ , 1,84 GHZ)
>> > >> > > Ram : 1GB
>> > >> > > Harddisk : Maxtor 6Y120L0 (120 GB)
>> > >> > >
>> > >> > > (this is all u need to know i think)
>> > >> > > ----
>> > >> > >
>> > >> > > Oke this is my problem.
>> > >> > > i set my Harddisk in 3 partitions with the program called
>> > >> > > maxblaster
>> > >> > > 4.
>> > >> > > so i begin install Windows Vista with DDO (Dynamic Disk Overlay)
>> > >> > > and i select my partition and it begins installing but when it's
>> > >> > > done
>> > >> > > DDO
>> > >> > > is
>> > >> > > gone and windows won't start. It says something with defragment
>> > >> > > disk.
>> > >> > > but i think it's because DDO is gone.
>> > >> > >
>> > >> > > So plz help me step by step.
>> > >> > >
>> > >> > > (ps: I updated my bios to the latest version)
>> > >
>> > > "Peter M" wrote:
>> > >
>> > >> > Get rid of dynamic overlay. Thats main problem number one. It's
>> > >> > only
>> > >> > used
>> > >> > for old motherboards that dont support large disks. Your board is
>> > >> > a
>> > >> > nforce2
>> > >> > which has no problem with large disk drives. You'll have to search
>> > >> > how
>> > >> > to
>> > >> > uninstall DDO unless you can from maxblast. Just use maxblast to
>> > >> > partition
>> > >> > without DDO and then try vista again.
>> > >
>> > > "CHRUXIOS" wrote:
>> > >
>> > >> Humf i tried to install vista on my harddisk without the DDO but
>> > >> than
>> > >> it's
>> > >> says it can't detect a hard disk ... but DDO was installed but i can
>> > >> always
>> > >> try to uninstall DDO and try to install vista again ..
>> > >>
>> > >> thnx i give a try
>> > >
>> > > Diddn't work this is wot i did i set up my partition with maxblaster
>> > > 4
>> > > uninstall DDO tried to install Vista and this is the message i get :
>> > > "Setup
>> > > could not get information about the disk on your computer
>> > >
>> >
>> >
>> >

Never mind this was my problem after zero fill driver ( with maxblaster ) i
created the partitions with Windows xp Setup cd and after i created the
partitions i start windows vista install dvd and now i can see my drive good

but now i got a other problem Error because my dvd is damanged (bad luck)
and i can't download it anymore but thnx i fix this problem

"Colin Barnhorst" wrote:

> Is it formatted FAT32?
>
> "CHRUXIOS" <CHRUXIOS@discussions.microsoft.com> wrote in message
> news:27388E43-F4AF-48B7-91E6-C99F7213C376@microsoft.com...

> > one step father i did the option "zero full drive" so Vista can detect
> > hard
> > drive now but it only shows me 31.5 GB
> >
> > "CHRUXIOS" wrote:
> >

> >> I got ATA i think Disk: MAXTOR 6Y120L0
> >>
> >> "Jane C" wrote:
> >>
> >> > Is your hard drive on a SATA controller? There is an option to load
> >> > SATA
> >> > controller drivers during install via a "Load Driver" button.
> >> >
> >> > --
> >> > Jane, not plain 64bit enabled
> >> > Batteries not included. Braincell on vacation.
> >> > "CHRUXIOS" <CHRUXIOS@discussions.microsoft.com> wrote in message
> >> > news:960B4F34-A207-48AB-B23F-8321E1913E4A@microsoft.com...
> >> > > (continue this subject plz)
> >> > >
> >> > > Chruxios Wrote:
> >> > >> > > first my specs
> >> > >> > > ....
> >> > >> > > Mainboard : Soltek SL-75FRN-L ( AMD Athlon XP 2500+ , 1,84 GHZ)
> >> > >> > > Ram : 1GB
> >> > >> > > Harddisk : Maxtor 6Y120L0 (120 GB)
> >> > >> > >
> >> > >> > > (this is all u need to know i think)
> >> > >> > > ----
> >> > >> > >
> >> > >> > > Oke this is my problem.
> >> > >> > > i set my Harddisk in 3 partitions with the program called
> >> > >> > > maxblaster
> >> > >> > > 4.
> >> > >> > > so i begin install Windows Vista with DDO (Dynamic Disk Overlay)
> >> > >> > > and i select my partition and it begins installing but when it's
> >> > >> > > done
> >> > >> > > DDO
> >> > >> > > is
> >> > >> > > gone and windows won't start. It says something with defragment
> >> > >> > > disk.
> >> > >> > > but i think it's because DDO is gone.
> >> > >> > >
> >> > >> > > So plz help me step by step.
> >> > >> > >
> >> > >> > > (ps: I updated my bios to the latest version)
> >> > >
> >> > > "Peter M" wrote:
> >> > >
> >> > >> > Get rid of dynamic overlay. Thats main problem number one. It's
> >> > >> > only
> >> > >> > used
> >> > >> > for old motherboards that dont support large disks. Your board is
> >> > >> > a
> >> > >> > nforce2
> >> > >> > which has no problem with large disk drives. You'll have to search
> >> > >> > how
> >> > >> > to
> >> > >> > uninstall DDO unless you can from maxblast. Just use maxblast to
> >> > >> > partition
> >> > >> > without DDO and then try vista again.
> >> > >
> >> > > "CHRUXIOS" wrote:
> >> > >
> >> > >> Humf i tried to install vista on my harddisk without the DDO but
> >> > >> than
> >> > >> it's
> >> > >> says it can't detect a hard disk ... but DDO was installed but i can
> >> > >> always
> >> > >> try to uninstall DDO and try to install vista again ..
> >> > >>
> >> > >> thnx i give a try
> >> > >
> >> > > Diddn't work this is wot i did i set up my partition with maxblaster
> >> > > 4
> >> > > uninstall DDO tried to install Vista and this is the message i get :
> >> > > "Setup
> >> > > could not get information about the disk on your computer
> >> > >
> >> >
> >> >
> >> >

>
>
>

What I would do is to get any boot disk for win98 or winme.
start your computer with boot disk. at the a:\ type "fdisk/mbr"
press enter. from there you need your beta cd in it's drive remove the boot
disk.
resart and go from there. That will wipe out your master boot record that
hangs up from you useing a overlay program. If it still wont see your hard
drive down load softwere from Maxtor that will make it brand new and help you
format it so it can be seen by windows setup files.


"CHRUXIOS" wrote:

> (continue this subject plz)
>
> Chruxios Wrote:

> > > > first my specs
> > > > ....
> > > > Mainboard : Soltek SL-75FRN-L ( AMD Athlon XP 2500+ , 1,84 GHZ)
> > > > Ram : 1GB
> > > > Harddisk : Maxtor 6Y120L0 (120 GB)
> > > >
> > > > (this is all u need to know i think)
> > > > ----
> > > >
> > > > Oke this is my problem.
> > > > i set my Harddisk in 3 partitions with the program called maxblaster 4.
> > > > so i begin install Windows Vista with DDO (Dynamic Disk Overlay)
> > > > and i select my partition and it begins installing but when it's done DDO
> > > > is
> > > > gone and windows won't start. It says something with defragment disk.
> > > > but i think it's because DDO is gone.
> > > >
> > > > So plz help me step by step.
> > > >
> > > > (ps: I updated my bios to the latest version)

>
> "Peter M" wrote:
>

> > > Get rid of dynamic overlay. Thats main problem number one. It's only used
> > > for old motherboards that dont support large disks. Your board is a nforce2
> > > which has no problem with large disk drives. You'll have to search how to
> > > uninstall DDO unless you can from maxblast. Just use maxblast to partition
> > > without DDO and then try vista again.

>
> "CHRUXIOS" wrote:
>

> > Humf i tried to install vista on my harddisk without the DDO but than it's
> > says it can't detect a hard disk ... but DDO was installed but i can always
> > try to uninstall DDO and try to install vista again ..
> >
> > thnx i give a try

>
> Diddn't work this is wot i did i set up my partition with maxblaster 4
> uninstall DDO tried to install Vista and this is the message i get : "Setup
> could not get information about the disk on your computer
>

I am having the same problem with my ddo software also from maxblast, but i
knew that after installing a new os my mbr would be changed, so before i
installed vista i booted from my maxblast cd and made backyps of my master
boot records, this saved my butt. after i backed up my mbr i rebooted into
windows xp and performed a full installation to my spare partition, my drive
config looks like this ide 1 pri master hitachi 60gig split into 2 partitions
c:\winxppro +30 gigs and e:\free partition renamed to vsta +30 gigs,,,, ide 1
pri slave maxtor 200gig also split into 2 partitions d:\installation drive
for xp programs +80 gigs and g:\backup and download storage

after the installation of vista decompressed it's files it rebooted for the
first time, emediatly after bios prompt i noticed my ddo was missing, vista
finished installing and of course i had a 200 gig hd that says it is only
32gigs vista wanted me to format this drive i refused and restarted my
computer at the dual boot screen i choose to start my xp os it failed to boot
ntldr missing, i rebooted again, this time witjh the maxblast disk in the
drive after reinstalling ddo both ose's failed to start major problems, i
rebooted again with the maxblast cd restored the mbr and rebooted again xp
still failed to boot,,, error loaded needed dlls for kernel so i tried vista
fired right up, so i formatted the vista drive reinstalled ddo and
reinstalled xp to the old vista partition after my pc rebooted i installed
ddo again and rebooted xpfinished installing hardware and started all of the
data and partitions on the 200 gig maxtor were intact,

currently i have formatted once more and reinstalled vista i have not and
will not format the 32gig maxtor drive so untill maxtor adds vista support to
their maxblaast software this is were i will sit, there is one thing i wish i
would have tried before re installing vista though, on the maxtor site
www.maxtor.com theres a downloadable reg fix for large disk enabled in win
xp, i still might format 1 more time reinstall xp and download this file, i'm
not certain but it might help us with this ddo headache we are experiencing
with vista, happy beta testing and if you happen to find a fix please submit
it in this forum good luck were going to need it.
--
ecs n2u400a M/B
amd athalon xp 3000+ 2.1 ghz 400fsb
2x 512mb ocz matched pc3200ddr
xfx gf6600 agp 256mb dual dvi
hitachi 60gb hd pri master
maxtor 200 gb pri slave
lite-on dvd +/- R/RW/dl



"bbruce" wrote:

> What I would do is to get any boot disk for win98 or winme.
> start your computer with boot disk. at the a:\ type "fdisk/mbr"
> press enter. from there you need your beta cd in it's drive remove the boot
> disk.
> resart and go from there. That will wipe out your master boot record that
> hangs up from you useing a overlay program. If it still wont see your hard
> drive down load softwere from Maxtor that will make it brand new and help you
> format it so it can be seen by windows setup files.
>
>
> "CHRUXIOS" wrote:
>

> > (continue this subject plz)
> >
> > Chruxios Wrote:

> > > > > first my specs
> > > > > ....
> > > > > Mainboard : Soltek SL-75FRN-L ( AMD Athlon XP 2500+ , 1,84 GHZ)
> > > > > Ram : 1GB
> > > > > Harddisk : Maxtor 6Y120L0 (120 GB)
> > > > >
> > > > > (this is all u need to know i think)
> > > > > ----
> > > > >
> > > > > Oke this is my problem.
> > > > > i set my Harddisk in 3 partitions with the program called maxblaster 4.
> > > > > so i begin install Windows Vista with DDO (Dynamic Disk Overlay)
> > > > > and i select my partition and it begins installing but when it's done DDO
> > > > > is
> > > > > gone and windows won't start. It says something with defragment disk.
> > > > > but i think it's because DDO is gone.
> > > > >
> > > > > So plz help me step by step.
> > > > >
> > > > > (ps: I updated my bios to the latest version)

> >
> > "Peter M" wrote:
> >

> > > > Get rid of dynamic overlay. Thats main problem number one. It's only used
> > > > for old motherboards that dont support large disks. Your board is a nforce2
> > > > which has no problem with large disk drives. You'll have to search how to
> > > > uninstall DDO unless you can from maxblast. Just use maxblast to partition
> > > > without DDO and then try vista again.

> >
> > "CHRUXIOS" wrote:
> >

> > > Humf i tried to install vista on my harddisk without the DDO but than it's
> > > says it can't detect a hard disk ... but DDO was installed but i can always
> > > try to uninstall DDO and try to install vista again ..
> > >
> > > thnx i give a try

> >
> > Diddn't work this is wot i did i set up my partition with maxblaster 4
> > uninstall DDO tried to install Vista and this is the message i get : "Setup
> > could not get information about the disk on your computer
> >

--
ecs n2u400a M/B
amd athalon xp 3000+ 2.1 ghz 400fsb
2x 512mb ocz matched pc3200ddr
xfx gf6600 agp 256mb dual dvi
hitachi 60gb hd pri master
maxtor 200 gb pri slave
lite-on dvd +/- R/RW/dl



"bbruce" wrote:

> What I would do is to get any boot disk for win98 or winme.
> start your computer with boot disk. at the a:\ type "fdisk/mbr"
> press enter. from there you need your beta cd in it's drive remove the boot
> disk.
> resart and go from there. That will wipe out your master boot record that
> hangs up from you useing a overlay program. If it still wont see your hard
> drive down load softwere from Maxtor that will make it brand new and help you
> format it so it can be seen by windows setup files.
>
>
> "CHRUXIOS" wrote:
>

> > (continue this subject plz)
> >
> > Chruxios Wrote:

> > > > > first my specs
> > > > > ....
> > > > > Mainboard : Soltek SL-75FRN-L ( AMD Athlon XP 2500+ , 1,84 GHZ)
> > > > > Ram : 1GB
> > > > > Harddisk : Maxtor 6Y120L0 (120 GB)
> > > > >
> > > > > (this is all u need to know i think)
> > > > > ----
> > > > >
> > > > > Oke this is my problem.
> > > > > i set my Harddisk in 3 partitions with the program called maxblaster 4.
> > > > > so i begin install Windows Vista with DDO (Dynamic Disk Overlay)
> > > > > and i select my partition and it begins installing but when it's done DDO
> > > > > is
> > > > > gone and windows won't start. It says something with defragment disk.
> > > > > but i think it's because DDO is gone.
> > > > >
> > > > > So plz help me step by step.
> > > > >
> > > > > (ps: I updated my bios to the latest version)

> >
> > "Peter M" wrote:
> >

> > > > Get rid of dynamic overlay. Thats main problem number one. It's only used
> > > > for old motherboards that dont support large disks. Your board is a nforce2
> > > > which has no problem with large disk drives. You'll have to search how to
> > > > uninstall DDO unless you can from maxblast. Just use maxblast to partition
> > > > without DDO and then try vista again.

> >
> > "CHRUXIOS" wrote:
> >

> > > Humf i tried to install vista on my harddisk without the DDO but than it's
> > > says it can't detect a hard disk ... but DDO was installed but i can always
> > > try to uninstall DDO and try to install vista again ..
> > >
> > > thnx i give a try

> >
> > Diddn't work this is wot i did i set up my partition with maxblaster 4
> > uninstall DDO tried to install Vista and this is the message i get : "Setup
> > could not get information about the disk on your computer
> >

ecs n2u400a M/B
amd athalon xp 3000+ 2.1 ghz 400fsb
2x 512mb ocz matched pc3200ddr
xfx gf6600 agp 256mb dual dvi
hitachi 60gb hd pri master
maxtor 200 gb pri slave
lite-on dvd +/- R/RW/dl



"bbruce" wrote:

> What I would do is to get any boot disk for win98 or winme.
> start your computer with boot disk. at the a:\ type "fdisk/mbr"
> press enter. from there you need your beta cd in it's drive remove the boot
> disk.
> resart and go from there. That will wipe out your master boot record that
> hangs up from you useing a overlay program. If it still wont see your hard
> drive down load softwere from Maxtor that will make it brand new and help you
> format it so it can be seen by windows setup files.
>
>
> "CHRUXIOS" wrote:
>

> > (continue this subject plz)
> >
> > Chruxios Wrote:

> > > > > first my specs
> > > > > ....
> > > > > Mainboard : Soltek SL-75FRN-L ( AMD Athlon XP 2500+ , 1,84 GHZ)
> > > > > Ram : 1GB
> > > > > Harddisk : Maxtor 6Y120L0 (120 GB)
> > > > >
> > > > > (this is all u need to know i think)
> > > > > ----
> > > > >
> > > > > Oke this is my problem.
> > > > > i set my Harddisk in 3 partitions with the program called maxblaster 4.
> > > > > so i begin install Windows Vista with DDO (Dynamic Disk Overlay)
> > > > > and i select my partition and it begins installing but when it's done DDO
> > > > > is
> > > > > gone and windows won't start. It says something with defragment disk.
> > > > > but i think it's because DDO is gone.
> > > > >
> > > > > So plz help me step by step.
> > > > >
> > > > > (ps: I updated my bios to the latest version)

> >
> > "Peter M" wrote:
> >

> > > > Get rid of dynamic overlay. Thats main problem number one. It's only used
> > > > for old motherboards that dont support large disks. Your board is a nforce2
> > > > which has no problem with large disk drives. You'll have to search how to
> > > > uninstall DDO unless you can from maxblast. Just use maxblast to partition
> > > > without DDO and then try vista again.

> >
> > "CHRUXIOS" wrote:
> >

> > > Humf i tried to install vista on my harddisk without the DDO but than it's
> > > says it can't detect a hard disk ... but DDO was installed but i can always
> > > try to uninstall DDO and try to install vista again ..
> > >
> > > thnx i give a try

> >
> > Diddn't work this is wot i did i set up my partition with maxblaster 4
> > uninstall DDO tried to install Vista and this is the message i get : "Setup
> > could not get information about the disk on your computer
> >