Installing Vista on Toshiba Tecra M5 Laptop

Tried this morning to install Vista on my new laptop and recieve the
following error message

You must make the following changes before installing windows.
Windows cannot be installed on this computer with the current system BIOS
version. Contact your computer manufacturer for a BIOS update, install the
update, and then start windows installation again.
OEM Name: Toshiba: OEM Model: TECRA M5: BIOS Version v1.50: BIOS Date:
20060425000000.000000+000

Have a sticker on the laptop that says Windows Vista Capable, so I guess not
yet!!!

Unfortunately "Vista Capable" does not a guarantee Vista will run on it.
Since there are changes in all the Vista builds, it is possible that a
computer that runs an earlier build will not with a later build of Vista.

After checking the Toshiba website, it appears you have the latest BIOS.
You could contact Toshiba and see what they have to say.
However most OEMs do not support an OS that was not shipped with the
computer.

I recently acquired a used Tecra S1 and it seems to run the current Build
5536 as well as the previous Build 5472 fine.
What build of Vista are you attempting to install?

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar
http://www.dts-l.org


"Clayton" <claytonbNOSPAM@xtra.co.nz> wrote in message
news:eXN8KNXyGHA.284@TK2MSFTNGP02.phx.gbl...

> Tried this morning to install Vista on my new laptop and recieve the
> following error message
>
> You must make the following changes before installing windows.
> Windows cannot be installed on this computer with the current system BIOS
> version. Contact your computer manufacturer for a BIOS update, install the
> update, and then start windows installation again.
> OEM Name: Toshiba: OEM Model: TECRA M5: BIOS Version v1.50: BIOS Date:
> 20060425000000.000000+000
>
> Have a sticker on the laptop that says Windows Vista Capable, so I guess
> not yet!!!
>
>

5536

I got it working ok, must not have liked being installing within a currently
running OS


"Jupiter Jones [MVP]" <jones_jupiter@hotnomail.com> wrote in message
news:OqxpOhYyGHA.2516@TK2MSFTNGP06.phx.gbl...

> Unfortunately "Vista Capable" does not a guarantee Vista will run on it.
> Since there are changes in all the Vista builds, it is possible that a
> computer that runs an earlier build will not with a later build of Vista.
>
> After checking the Toshiba website, it appears you have the latest BIOS.
> You could contact Toshiba and see what they have to say.
> However most OEMs do not support an OS that was not shipped with the
> computer.
>
> I recently acquired a used Tecra S1 and it seems to run the current Build
> 5536 as well as the previous Build 5472 fine.
> What build of Vista are you attempting to install?
>
> --
> Jupiter Jones [MVP]
> http://www3.telus.net/dandemar
> http://www.dts-l.org
>
>
> "Clayton" <claytonbNOSPAM@xtra.co.nz> wrote in message
> news:eXN8KNXyGHA.284@TK2MSFTNGP02.phx.gbl...

>
>

Hello,

I am experiencing the same problem; exaclty how did you get the install
working Clayton?
--
Wendell Ying


"Clayton" wrote:

> 5536
>
> I got it working ok, must not have liked being installing within a currently
> running OS
>
>
> "Jupiter Jones [MVP]" <jones_jupiter@hotnomail.com> wrote in message
> news:OqxpOhYyGHA.2516@TK2MSFTNGP06.phx.gbl...

>
>
>

Remove any usb devices (mouse ok connected) remove from docking station and
boot from the Vista DVD


"Wendell Ying" <WendellYing@discussions.microsoft.com> wrote in message
news:C048418C-9945-4D51-8395-A619C0D5A4B0@microsoft.com...

> Hello,
>
> I am experiencing the same problem; exaclty how did you get the install
> working Clayton?
> --
> Wendell Ying
>
>
> "Clayton" wrote:
>

Wendell, if you get Vista installed (Clean Install) it will show 3 unknown
devices after setup has completed.
One is for the HDD Sensor and the other is for Bluetooth, not sure what the
other is for.
DON'T install the HDD Sensor that came for XP as it will turn your
installation to custard and you will end up having to do a last know good
configuration and then it will show 6 unknown devices.
I tried installing Bluettoth and the installation hung and I had to abort
it.

Good luck

Clayton



"Clayton" <claytonbNOSPAM@xtra.co.nz> wrote in message
news:ObyQvrjyGHA.2208@TK2MSFTNGP03.phx.gbl...

> Remove any usb devices (mouse ok connected) remove from docking station
> and boot from the Vista DVD
>
>
> "Wendell Ying" <WendellYing@discussions.microsoft.com> wrote in message
> news:C048418C-9945-4D51-8395-A619C0D5A4B0@microsoft.com...

>
>