I've tried everything on these discussions. Please help.

Posted: 06-14-2006, 07:48 AM
I've tried several different software programs for burning, and mounting.
I've tried extracting the files from the ISO image. Nothin is working. I keep
getting an error, saying that the setupe.exe and autorun are not valid
Windows images. I've downloaded the ISO several times directly from
Microsoft. Any ideas would be appreciated.
Reply With Quote

Responses to "I've tried everything on these discussions. Please help."

droid
Guest
Posts: n/a
 
Re: I've tried everything on these discussions. Please help.
Posted: 06-14-2006, 08:29 AM
Try in this order:

1. Get ImgBurn and burn the image to dvd+rw or -rw (get new different brand
disc to be sure it's not the disc) or waste a regular dvd. Now reboot and
set bios to boot from dvd/cd drive. What it says?

2. If it still gives errors after booting computer from the dvd then google
for 5384.4 torrent and download with bittorrent. This will take much longer
than normal download but will guarantee that the image is OK. Now ImgBurn
again and reboot from dvd.. If it still gives same errors then there is
problem with the hardware or bios settings and the data is corrupted either
on the way from/to dvd or hdd OR the memory is bad (or ... or ...)



"Clutch" <Clutch@discussions.microsoft.com> wrote in message
news:76C3CA3B-2E1B-4015-89B3-4ADBFD4872BD@microsoft.com...
> I've tried several different software programs for burning, and mounting.
> I've tried extracting the files from the ISO image. Nothin is working. I
> keep
> getting an error, saying that the setupe.exe and autorun are not valid
> Windows images. I've downloaded the ISO several times directly from
> Microsoft. Any ideas would be appreciated.
Reply With Quote
Andre Da Costa [Extended64]
Guest
Posts: n/a
 
Re: I've tried everything on these discussions. Please help.
Posted: 06-14-2006, 08:42 AM
Order the DVD.
--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta

"Clutch" <Clutch@discussions.microsoft.com> wrote in message
news:76C3CA3B-2E1B-4015-89B3-4ADBFD4872BD@microsoft.com...
> I've tried several different software programs for burning, and mounting.
> I've tried extracting the files from the ISO image. Nothin is working. I
> keep
> getting an error, saying that the setupe.exe and autorun are not valid
> Windows images. I've downloaded the ISO several times directly from
> Microsoft. Any ideas would be appreciated.

Reply With Quote
Mark Hartt-Palmer
Guest
Posts: n/a
 
Re: I've tried everything on these discussions. Please help.
Posted: 06-14-2006, 12:04 PM
> 2. If it still gives errors after booting computer from the dvd then google
> for 5384.4 torrent and download with bittorrent.
Let me get this right. You're actually advocating that someone downloads an
(illegal) copy of Vista from a BitTorrent site? Hmm, I wonder what Microsoft
would have to say about this...

"droid" wrote:
> Try in this order:
>
> 1. Get ImgBurn and burn the image to dvd+rw or -rw (get new different brand
> disc to be sure it's not the disc) or waste a regular dvd. Now reboot and
> set bios to boot from dvd/cd drive. What it says?
>
> 2. If it still gives errors after booting computer from the dvd then google
> for 5384.4 torrent and download with bittorrent. This will take much longer
> than normal download but will guarantee that the image is OK. Now ImgBurn
> again and reboot from dvd.. If it still gives same errors then there is
> problem with the hardware or bios settings and the data is corrupted either
> on the way from/to dvd or hdd OR the memory is bad (or ... or ...)
>
>
>
> "Clutch" <Clutch@discussions.microsoft.com> wrote in message
> news:76C3CA3B-2E1B-4015-89B3-4ADBFD4872BD@microsoft.com...
> > I've tried several different software programs for burning, and mounting.
> > I've tried extracting the files from the ISO image. Nothin is working. I
> > keep
> > getting an error, saying that the setupe.exe and autorun are not valid
> > Windows images. I've downloaded the ISO several times directly from
> > Microsoft. Any ideas would be appreciated.
>
Reply With Quote
John S.
Guest
Posts: n/a
 
RE: I've tried everything on these discussions. Please help.
Posted: 06-14-2006, 12:13 PM
I got install errors also until I burned the DVD at the SLOWEST possible
speed. I tried the install from a DVD I burned at 8X and it would not work,
then I used one burned from the same download at 2X and it went perfectly.
--
If you can read this, thank a teacher. Since you are reading it in English,
thank a Soldier.


"Clutch" wrote:
> I've tried several different software programs for burning, and mounting.
> I've tried extracting the files from the ISO image. Nothin is working. I keep
> getting an error, saying that the setupe.exe and autorun are not valid
> Windows images. I've downloaded the ISO several times directly from
> Microsoft. Any ideas would be appreciated.
Reply With Quote
Chris Meadors
Guest
Posts: n/a
 
Re: I've tried everything on these discussions. Please help.
Posted: 06-14-2006, 05:52 PM
On Wed, 2006-06-14 at 00:48 -0700, Clutch wrote:
> I've tried several different software programs for burning, and mounting.
> I've tried extracting the files from the ISO image. Nothin is working. I keep
> getting an error, saying that the setupe.exe and autorun are not valid
> Windows images. I've downloaded the ISO several times directly from
> Microsoft. Any ideas would be appreciated.
Are you trying to run the X64 executables in an 32-bit Windows? That
will generate that error.

Reply With Quote
Chief
Guest
Posts: n/a
 
RE: I've tried everything on these discussions. Please help.
Posted: 06-15-2006, 12:18 AM
I am having the same problem. I am stumped. I have burned ISO to disk
before, and it is USUALLY straight forward. I have used NERO, and Alcohol
120%. I download the image file twice. The file is the correct size, but
when I burn the disc, only the readme file is visible yet there is 3 gigs of
space used on the disc. It

I don't know if this could possibly have anything to do with this, but if
certain services were disabled using the admin tools, if that could be the
cause of why the OS doesn't seem to be able to read the UDP format that is
being used on the DVD image. A while back, in order to improve system
performance, I shut down extra services that weren't supposidly needed
according to some techy web sites. Did anyone else that is still getting the
"This disc contains a "UDF" file system and requires an operating system
that supports the ISO-13346 "UDF" file system specification." ever disable
extra services ? I am just looking to see if there is a common factor to try
and figure this thing out. Thanks folks.

"Clutch" wrote:
> I've tried several different software programs for burning, and mounting.
> I've tried extracting the files from the ISO image. Nothin is working. I keep
> getting an error, saying that the setupe.exe and autorun are not valid
> Windows images. I've downloaded the ISO several times directly from
> Microsoft. Any ideas would be appreciated.
Reply With Quote
Chief
Guest
Posts: n/a
 
RE: I've tried everything on these discussions. Please help.
Posted: 06-15-2006, 12:18 AM
I am having the same problem. I am stumped. I have burned ISO to disk
before, and it is USUALLY straight forward. I have used NERO, and Alcohol
120%. I download the image file twice. The file is the correct size, but
when I burn the disc, only the readme file is visible yet there is 3 gigs of
space used on the disc. It

I don't know if this could possibly have anything to do with this, but if
certain services were disabled using the admin tools, if that could be the
cause of why the OS doesn't seem to be able to read the UDP format that is
being used on the DVD image. A while back, in order to improve system
performance, I shut down extra services that weren't supposidly needed
according to some techy web sites. Did anyone else that is still getting the
"This disc contains a "UDF" file system and requires an operating system
that supports the ISO-13346 "UDF" file system specification." ever disable
extra services ? I am just looking to see if there is a common factor to try
and figure this thing out. Thanks folks.

"Clutch" wrote:
> I've tried several different software programs for burning, and mounting.
> I've tried extracting the files from the ISO image. Nothin is working. I keep
> getting an error, saying that the setupe.exe and autorun are not valid
> Windows images. I've downloaded the ISO several times directly from
> Microsoft. Any ideas would be appreciated.
Reply With Quote
Chief
Guest
Posts: n/a
 
RE: I've tried everything on these discussions. Please help.
Posted: 06-15-2006, 12:19 AM
I am having the same problem. I am stumped. I have burned ISO to disk
before, and it is USUALLY straight forward. I have used NERO, and Alcohol
120%. I download the image file twice. The file is the correct size, but
when I burn the disc, only the readme file is visible yet there is 3 gigs of
space used on the disc. It

I don't know if this could possibly have anything to do with this, but if
certain services were disabled using the admin tools, if that could be the
cause of why the OS doesn't seem to be able to read the UDP format that is
being used on the DVD image. A while back, in order to improve system
performance, I shut down extra services that weren't supposidly needed
according to some techy web sites. Did anyone else that is still getting the
"This disc contains a "UDF" file system and requires an operating system
that supports the ISO-13346 "UDF" file system specification." ever disable
extra services ? I am just looking to see if there is a common factor to try
and figure this thing out. Thanks folks.

"Clutch" wrote:
> I've tried several different software programs for burning, and mounting.
> I've tried extracting the files from the ISO image. Nothin is working. I keep
> getting an error, saying that the setupe.exe and autorun are not valid
> Windows images. I've downloaded the ISO several times directly from
> Microsoft. Any ideas would be appreciated.
Reply With Quote
droid
Guest
Posts: n/a
 
Re: I've tried everything on these discussions. Please help.
Posted: 06-16-2006, 12:22 PM
In your case I'd burn the image with ImgBurn and boot the computer from DVD.

And yeah, those web sites suggesting to shut down this and that service are
guaranteed to not know what they are talking about. They don't have a
million testers with ton of apps or the experience of MS to tell what side
effects there are to doing so. With so little details I can't comment on why
the UDF disc doesn't show up normally. If I had to pick a guess, Nero/Game
DRM/Alcohol/antivirus/takeyourpick has changed something what they shouldn't
have. Not very unusual - most 3rd party developers don't have the million
testers either that MS has but they change OS settings at their whim.




"Chief" <Chief@discussions.microsoft.com> wrote in message
news:6BAE6978-3DA0-4C27-80DA-832C7709B056@microsoft.com...
>I am having the same problem. I am stumped. I have burned ISO to disk
> before, and it is USUALLY straight forward. I have used NERO, and Alcohol
> 120%. I download the image file twice. The file is the correct size, but
> when I burn the disc, only the readme file is visible yet there is 3 gigs
> of
> space used on the disc. It
>
> I don't know if this could possibly have anything to do with this, but if
> certain services were disabled using the admin tools, if that could be the
> cause of why the OS doesn't seem to be able to read the UDP format that is
> being used on the DVD image. A while back, in order to improve system
> performance, I shut down extra services that weren't supposidly needed
> according to some techy web sites. Did anyone else that is still getting
> the
> "This disc contains a "UDF" file system and requires an operating system
> that supports the ISO-13346 "UDF" file system specification." ever disable
> extra services ? I am just looking to see if there is a common factor to
> try
> and figure this thing out. Thanks folks.
>
> "Clutch" wrote:
>
>> I've tried several different software programs for burning, and mounting.
>> I've tried extracting the files from the ISO image. Nothin is working. I
>> keep
>> getting an error, saying that the setupe.exe and autorun are not valid
>> Windows images. I've downloaded the ISO several times directly from
>> Microsoft. Any ideas would be appreciated.
Reply With Quote
 
LinkBack Thread Tools Display Modes
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
WLMD MS discussions bug sim.seb Windows Vista Mail 1 06-25-2006 02:54 PM