Ok MowGreen,

Please excuse my ignorance. This Is new to me. I still was still unclear on
your instruction. I did however do an Inet search on
"Elevated Command Prompt " and found a page explaining it a little better.
Now I am still unclear on what to rename.
If you see my prev. post you will see I have 3 - msxml4.dll files. Rename
them all or just the 1 large file?
I don't mind if you try walking me through things step by step as if I were
a total novice vs. Intermediate user.
Thanks again for your attn. to this problem.



"MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
news:OqH91BhaJHA.552@TK2MSFTNGP06.phx.gbl...

> You need to run an ELEVATED Command Prompt or you will get an Access
> Denied message, Larry. Please see my previous post to see learn how that
> is accomplished.
> Once you've renamed msxml4.dll from the Elevated CP, manually download the
> update from the links I previously provided and *save it*.
> Clean Boot the system now using the steps previously laid out.
> This will stop all non - MS services from loading on boot.
>
> Once the system has restarted, *right* click msxml4-KB954430-enu.exe and
> choose 'Run as admin ', follow the prompts.
> Reboot after it installs.
> Reenable all non - MS services now.
> Reboot once more.
>
> Did that get it installed properly ?
>
>
> MowGreen [MVP 2003-2009]
> ===============
> *-343-* FDNY
> Never Forgotten
> ===============
>
>
>
> Larry wrote:
>

>> MOWGreen,
>> Maybe it Is good you haven't gotten to this yet. I have to correct it. I
>> made a sm. error in following the web link instruction.
>> I went from the run prompt of Windows itself vs. the CMD prompt. I did
>> the ren again and it came back 'access denied'.
>> So I went and searched out the file following the path. I found 3 files
>> w/that name. Each has a different date & file size.
>> They are 4/18/03 4:46pm appl. ext. 1205 kb 10/9/07 2:07pm appl. ext 44kb
>> and 4/18/03 4:29pm appl. ext 81kb.
>> Does this help diagnose any? There are a couple of dll files that appear
>> to be there more than once.
>> Thanks
>>
>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>> news:OOm82R5ZJHA.5520@TK2MSFTNGP02.phx.gbl...
>>

>>> Larry,
>>>
>>> There is no KB9554430. Did you mean KB954430 ?
>>> If yes, then see this: http://support.microsoft.com/kb/941729
>>>
>>> Rename msxml4.dll by opening an Elevated Command Prompt [Start Search,
>>> type in command, *right click* command and choose 'Run as administrator'
>>> follow the prompts ]
>>> Do NOT reinstall KB9554430 when prompted to.
>>> Download and *save* it:
>>> http://www.microsoft.com/downloads/d...displaylang=en
>>>
>>> Once the download completes close all open browsers and programs.
>>> Clean Boot the system by disabling *all* non - MS services:
>>> http://support.microsoft.com/kb/929135
>>>
>>> *Right* click msxml4-KB954430-enu.exe and choose 'Run as admin ', follow
>>> the prompts.
>>> Reboot after it installs.
>>> Reenable all non - MS services now.
>>> Reboot once more.
>>>
>>> Did that get it installed properly ?
>>>
>>>
>>> MowGreen [MVP 2003-2009]
>>> ===============
>>> *-343-* FDNY
>>> Never Forgotten
>>> ===============
>>>
>>>
>>>
>>> Larry wrote:
>>>
>>>> I am trying to figure out why I keep getting prompted I need to d/l
>>>> this Security Update.
>>>> I have d/l'ed and installed it several times. It is not showing as an
>>>> installed d/l I can remove.
>>>> But looking at d/l'ed updates it is there a # of times. Any help is
>>>> much appreciated.
>>>>
>>>>

Just rename msxml4.dll at the Elevated Command Prompt, Larry. No need to
specify anything but that specific file. There is only one copy by that
name in system32.

> Start Search, type in command, *right click* command and choose 'Run as administrator' follow the
> prompts

MowGreen [MVP 2003-2009]
===============
*-343-* FDNY
Never Forgotten
===============


Larry wrote:

> Ok MowGreen,
>
> Please excuse my ignorance. This Is new to me. I still was still
> unclear on your instruction. I did however do an Inet search on
> "Elevated Command Prompt " and found a page explaining it a little
> better. Now I am still unclear on what to rename.
> If you see my prev. post you will see I have 3 - msxml4.dll files.
> Rename them all or just the 1 large file?
> I don't mind if you try walking me through things step by step as if I
> were a total novice vs. Intermediate user.
> Thanks again for your attn. to this problem.
>
>
>
> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
> news:OqH91BhaJHA.552@TK2MSFTNGP06.phx.gbl...
>

>> You need to run an ELEVATED Command Prompt or you will get an Access
>> Denied message, Larry. Please see my previous post to see learn how
>> that is accomplished.
>> Once you've renamed msxml4.dll from the Elevated CP, manually download
>> the update from the links I previously provided and *save it*.
>> Clean Boot the system now using the steps previously laid out.
>> This will stop all non - MS services from loading on boot.
>>
>> Once the system has restarted, *right* click msxml4-KB954430-enu.exe
>> and choose 'Run as admin ', follow the prompts.
>> Reboot after it installs.
>> Reenable all non - MS services now.
>> Reboot once more.
>>
>> Did that get it installed properly ?
>>
>>
>> MowGreen [MVP 2003-2009]
>> ===============
>> *-343-* FDNY
>> Never Forgotten
>> ===============
>>
>>
>>
>> Larry wrote:
>>

>>> MOWGreen,
>>> Maybe it Is good you haven't gotten to this yet. I have to correct
>>> it. I made a sm. error in following the web link instruction.
>>> I went from the run prompt of Windows itself vs. the CMD prompt. I
>>> did the ren again and it came back 'access denied'.
>>> So I went and searched out the file following the path. I found 3
>>> files w/that name. Each has a different date & file size.
>>> They are 4/18/03 4:46pm appl. ext. 1205 kb 10/9/07 2:07pm appl. ext
>>> 44kb and 4/18/03 4:29pm appl. ext 81kb.
>>> Does this help diagnose any? There are a couple of dll files that
>>> appear to be there more than once.
>>> Thanks
>>>
>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>> news:OOm82R5ZJHA.5520@TK2MSFTNGP02.phx.gbl...
>>>
>>>> Larry,
>>>>
>>>> There is no KB9554430. Did you mean KB954430 ?
>>>> If yes, then see this: http://support.microsoft.com/kb/941729
>>>>
>>>> Rename msxml4.dll by opening an Elevated Command Prompt [Start
>>>> Search, type in command, *right click* command and choose 'Run as
>>>> administrator' follow the prompts ]
>>>> Do NOT reinstall KB9554430 when prompted to.
>>>> Download and *save* it:
>>>> http://www.microsoft.com/downloads/d...displaylang=en
>>>>
>>>>
>>>> Once the download completes close all open browsers and programs.
>>>> Clean Boot the system by disabling *all* non - MS services:
>>>> http://support.microsoft.com/kb/929135
>>>>
>>>> *Right* click msxml4-KB954430-enu.exe and choose 'Run as admin ',
>>>> follow the prompts.
>>>> Reboot after it installs.
>>>> Reenable all non - MS services now.
>>>> Reboot once more.
>>>>
>>>> Did that get it installed properly ?
>>>>
>>>>
>>>> MowGreen [MVP 2003-2009]
>>>> ===============
>>>> *-343-* FDNY
>>>> Never Forgotten
>>>> ===============
>>>>
>>>>
>>>>
>>>> Larry wrote:
>>>>
>>>>> I am trying to figure out why I keep getting prompted I need to d/l
>>>>> this Security Update.
>>>>> I have d/l'ed and installed it several times. It is not showing as
>>>>> an installed d/l I can remove.
>>>>> But looking at d/l'ed updates it is there a # of times. Any help is
>>>>> much appreciated.
>>>>>
>>>>>

Just rename msxml4.dll at the Elevated Command Prompt, Larry. No need to
specify anything but that specific file. There is only one copy by that
name in system32.

> Start Search, type in command, *right click* command and choose 'Run as administrator' follow the
> prompts

MowGreen [MVP 2003-2009]
===============
*-343-* FDNY
Never Forgotten
===============


Larry wrote:

> Ok MowGreen,
>
> Please excuse my ignorance. This Is new to me. I still was still
> unclear on your instruction. I did however do an Inet search on
> "Elevated Command Prompt " and found a page explaining it a little
> better. Now I am still unclear on what to rename.
> If you see my prev. post you will see I have 3 - msxml4.dll files.
> Rename them all or just the 1 large file?
> I don't mind if you try walking me through things step by step as if I
> were a total novice vs. Intermediate user.
> Thanks again for your attn. to this problem.
>
>
>
> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
> news:OqH91BhaJHA.552@TK2MSFTNGP06.phx.gbl...
>

>> You need to run an ELEVATED Command Prompt or you will get an Access
>> Denied message, Larry. Please see my previous post to see learn how
>> that is accomplished.
>> Once you've renamed msxml4.dll from the Elevated CP, manually download
>> the update from the links I previously provided and *save it*.
>> Clean Boot the system now using the steps previously laid out.
>> This will stop all non - MS services from loading on boot.
>>
>> Once the system has restarted, *right* click msxml4-KB954430-enu.exe
>> and choose 'Run as admin ', follow the prompts.
>> Reboot after it installs.
>> Reenable all non - MS services now.
>> Reboot once more.
>>
>> Did that get it installed properly ?
>>
>>
>> MowGreen [MVP 2003-2009]
>> ===============
>> *-343-* FDNY
>> Never Forgotten
>> ===============
>>
>>
>>
>> Larry wrote:
>>

>>> MOWGreen,
>>> Maybe it Is good you haven't gotten to this yet. I have to correct
>>> it. I made a sm. error in following the web link instruction.
>>> I went from the run prompt of Windows itself vs. the CMD prompt. I
>>> did the ren again and it came back 'access denied'.
>>> So I went and searched out the file following the path. I found 3
>>> files w/that name. Each has a different date & file size.
>>> They are 4/18/03 4:46pm appl. ext. 1205 kb 10/9/07 2:07pm appl. ext
>>> 44kb and 4/18/03 4:29pm appl. ext 81kb.
>>> Does this help diagnose any? There are a couple of dll files that
>>> appear to be there more than once.
>>> Thanks
>>>
>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>> news:OOm82R5ZJHA.5520@TK2MSFTNGP02.phx.gbl...
>>>
>>>> Larry,
>>>>
>>>> There is no KB9554430. Did you mean KB954430 ?
>>>> If yes, then see this: http://support.microsoft.com/kb/941729
>>>>
>>>> Rename msxml4.dll by opening an Elevated Command Prompt [Start
>>>> Search, type in command, *right click* command and choose 'Run as
>>>> administrator' follow the prompts ]
>>>> Do NOT reinstall KB9554430 when prompted to.
>>>> Download and *save* it:
>>>> http://www.microsoft.com/downloads/d...displaylang=en
>>>>
>>>>
>>>> Once the download completes close all open browsers and programs.
>>>> Clean Boot the system by disabling *all* non - MS services:
>>>> http://support.microsoft.com/kb/929135
>>>>
>>>> *Right* click msxml4-KB954430-enu.exe and choose 'Run as admin ',
>>>> follow the prompts.
>>>> Reboot after it installs.
>>>> Reenable all non - MS services now.
>>>> Reboot once more.
>>>>
>>>> Did that get it installed properly ?
>>>>
>>>>
>>>> MowGreen [MVP 2003-2009]
>>>> ===============
>>>> *-343-* FDNY
>>>> Never Forgotten
>>>> ===============
>>>>
>>>>
>>>>
>>>> Larry wrote:
>>>>
>>>>> I am trying to figure out why I keep getting prompted I need to d/l
>>>>> this Security Update.
>>>>> I have d/l'ed and installed it several times. It is not showing as
>>>>> an installed d/l I can remove.
>>>>> But looking at d/l'ed updates it is there a # of times. Any help is
>>>>> much appreciated.
>>>>>
>>>>>

Happy New Yr.
Now, I did the rename w/no prob. What was throwing me off was when you were
saying Start Search. I am used to Start > Run > Cmd (or whatever).
Now when I go through the steps of a clean boot I have another item that
doesn't match. I went to msconfig.
Under General tab I checked Selective Startup, then unchecked load startup
items. Load system services is still checked.
When I go to the Services tab and checked Hide all MS svcs. I can only
enable not disable them. I have d/l'ed the file already.
For now I guess I'll just set it back to do a Normal startup. I don't think
I missed anything, did I?
I am trying to follow the links you gave me.

Thanks again for all your time.

"MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
news:OmD7ZbBbJHA.5676@TK2MSFTNGP03.phx.gbl...

> Just rename msxml4.dll at the Elevated Command Prompt, Larry. No need to
> specify anything but that specific file. There is only one copy by that
> name in system32.
>

>> Start Search, type in command, *right click* command and choose 'Run as
>> administrator' follow the prompts

>
>
> MowGreen [MVP 2003-2009]
> ===============
> *-343-* FDNY
> Never Forgotten
> ===============
>
>
> Larry wrote:
>

>> Ok MowGreen,
>>
>> Please excuse my ignorance. This Is new to me. I still was still unclear
>> on your instruction. I did however do an Inet search on
>> "Elevated Command Prompt " and found a page explaining it a little
>> better. Now I am still unclear on what to rename.
>> If you see my prev. post you will see I have 3 - msxml4.dll files.
>> Rename them all or just the 1 large file?
>> I don't mind if you try walking me through things step by step as if I
>> were a total novice vs. Intermediate user.
>> Thanks again for your attn. to this problem.
>>
>>
>>
>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>> news:OqH91BhaJHA.552@TK2MSFTNGP06.phx.gbl...
>>

>>> You need to run an ELEVATED Command Prompt or you will get an Access
>>> Denied message, Larry. Please see my previous post to see learn how that
>>> is accomplished.
>>> Once you've renamed msxml4.dll from the Elevated CP, manually download
>>> the update from the links I previously provided and *save it*.
>>> Clean Boot the system now using the steps previously laid out.
>>> This will stop all non - MS services from loading on boot.
>>>
>>> Once the system has restarted, *right* click msxml4-KB954430-enu.exe and
>>> choose 'Run as admin ', follow the prompts.
>>> Reboot after it installs.
>>> Reenable all non - MS services now.
>>> Reboot once more.
>>>
>>> Did that get it installed properly ?
>>>
>>>
>>> MowGreen [MVP 2003-2009]
>>> ===============
>>> *-343-* FDNY
>>> Never Forgotten
>>> ===============
>>>
>>>
>>>
>>> Larry wrote:
>>>
>>>> MOWGreen,
>>>> Maybe it Is good you haven't gotten to this yet. I have to correct it.
>>>> I made a sm. error in following the web link instruction.
>>>> I went from the run prompt of Windows itself vs. the CMD prompt. I did
>>>> the ren again and it came back 'access denied'.
>>>> So I went and searched out the file following the path. I found 3 files
>>>> w/that name. Each has a different date & file size.
>>>> They are 4/18/03 4:46pm appl. ext. 1205 kb 10/9/07 2:07pm appl. ext
>>>> 44kb and 4/18/03 4:29pm appl. ext 81kb.
>>>> Does this help diagnose any? There are a couple of dll files that
>>>> appear to be there more than once.
>>>> Thanks
>>>>
>>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>>> news:OOm82R5ZJHA.5520@TK2MSFTNGP02.phx.gbl...
>>>>
>>>>> Larry,
>>>>>
>>>>> There is no KB9554430. Did you mean KB954430 ?
>>>>> If yes, then see this: http://support.microsoft.com/kb/941729
>>>>>
>>>>> Rename msxml4.dll by opening an Elevated Command Prompt [Start Search,
>>>>> type in command, *right click* command and choose 'Run as
>>>>> administrator' follow the prompts ]
>>>>> Do NOT reinstall KB9554430 when prompted to.
>>>>> Download and *save* it:
>>>>> http://www.microsoft.com/downloads/d...displaylang=en
>>>>>
>>>>> Once the download completes close all open browsers and programs.
>>>>> Clean Boot the system by disabling *all* non - MS services:
>>>>> http://support.microsoft.com/kb/929135
>>>>>
>>>>> *Right* click msxml4-KB954430-enu.exe and choose 'Run as admin ',
>>>>> follow the prompts.
>>>>> Reboot after it installs.
>>>>> Reenable all non - MS services now.
>>>>> Reboot once more.
>>>>>
>>>>> Did that get it installed properly ?
>>>>>
>>>>>
>>>>> MowGreen [MVP 2003-2009]
>>>>> ===============
>>>>> *-343-* FDNY
>>>>> Never Forgotten
>>>>> ===============
>>>>>
>>>>>
>>>>>
>>>>> Larry wrote:
>>>>>
>>>>>> I am trying to figure out why I keep getting prompted I need to d/l
>>>>>> this Security Update.
>>>>>> I have d/l'ed and installed it several times. It is not showing as an
>>>>>> installed d/l I can remove.
>>>>>> But looking at d/l'ed updates it is there a # of times. Any help is
>>>>>> much appreciated.
>>>>>>
>>>>>>

Happy New Yr.
Now, I did the rename w/no prob. What was throwing me off was when you were
saying Start Search. I am used to Start > Run > Cmd (or whatever).
Now when I go through the steps of a clean boot I have another item that
doesn't match. I went to msconfig.
Under General tab I checked Selective Startup, then unchecked load startup
items. Load system services is still checked.
When I go to the Services tab and checked Hide all MS svcs. I can only
enable not disable them. I have d/l'ed the file already.
For now I guess I'll just set it back to do a Normal startup. I don't think
I missed anything, did I?
I am trying to follow the links you gave me.

Thanks again for all your time.

"MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
news:OmD7ZbBbJHA.5676@TK2MSFTNGP03.phx.gbl...

> Just rename msxml4.dll at the Elevated Command Prompt, Larry. No need to
> specify anything but that specific file. There is only one copy by that
> name in system32.
>

>> Start Search, type in command, *right click* command and choose 'Run as
>> administrator' follow the prompts

>
>
> MowGreen [MVP 2003-2009]
> ===============
> *-343-* FDNY
> Never Forgotten
> ===============
>
>
> Larry wrote:
>

>> Ok MowGreen,
>>
>> Please excuse my ignorance. This Is new to me. I still was still unclear
>> on your instruction. I did however do an Inet search on
>> "Elevated Command Prompt " and found a page explaining it a little
>> better. Now I am still unclear on what to rename.
>> If you see my prev. post you will see I have 3 - msxml4.dll files.
>> Rename them all or just the 1 large file?
>> I don't mind if you try walking me through things step by step as if I
>> were a total novice vs. Intermediate user.
>> Thanks again for your attn. to this problem.
>>
>>
>>
>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>> news:OqH91BhaJHA.552@TK2MSFTNGP06.phx.gbl...
>>

>>> You need to run an ELEVATED Command Prompt or you will get an Access
>>> Denied message, Larry. Please see my previous post to see learn how that
>>> is accomplished.
>>> Once you've renamed msxml4.dll from the Elevated CP, manually download
>>> the update from the links I previously provided and *save it*.
>>> Clean Boot the system now using the steps previously laid out.
>>> This will stop all non - MS services from loading on boot.
>>>
>>> Once the system has restarted, *right* click msxml4-KB954430-enu.exe and
>>> choose 'Run as admin ', follow the prompts.
>>> Reboot after it installs.
>>> Reenable all non - MS services now.
>>> Reboot once more.
>>>
>>> Did that get it installed properly ?
>>>
>>>
>>> MowGreen [MVP 2003-2009]
>>> ===============
>>> *-343-* FDNY
>>> Never Forgotten
>>> ===============
>>>
>>>
>>>
>>> Larry wrote:
>>>
>>>> MOWGreen,
>>>> Maybe it Is good you haven't gotten to this yet. I have to correct it.
>>>> I made a sm. error in following the web link instruction.
>>>> I went from the run prompt of Windows itself vs. the CMD prompt. I did
>>>> the ren again and it came back 'access denied'.
>>>> So I went and searched out the file following the path. I found 3 files
>>>> w/that name. Each has a different date & file size.
>>>> They are 4/18/03 4:46pm appl. ext. 1205 kb 10/9/07 2:07pm appl. ext
>>>> 44kb and 4/18/03 4:29pm appl. ext 81kb.
>>>> Does this help diagnose any? There are a couple of dll files that
>>>> appear to be there more than once.
>>>> Thanks
>>>>
>>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>>> news:OOm82R5ZJHA.5520@TK2MSFTNGP02.phx.gbl...
>>>>
>>>>> Larry,
>>>>>
>>>>> There is no KB9554430. Did you mean KB954430 ?
>>>>> If yes, then see this: http://support.microsoft.com/kb/941729
>>>>>
>>>>> Rename msxml4.dll by opening an Elevated Command Prompt [Start Search,
>>>>> type in command, *right click* command and choose 'Run as
>>>>> administrator' follow the prompts ]
>>>>> Do NOT reinstall KB9554430 when prompted to.
>>>>> Download and *save* it:
>>>>> http://www.microsoft.com/downloads/d...displaylang=en
>>>>>
>>>>> Once the download completes close all open browsers and programs.
>>>>> Clean Boot the system by disabling *all* non - MS services:
>>>>> http://support.microsoft.com/kb/929135
>>>>>
>>>>> *Right* click msxml4-KB954430-enu.exe and choose 'Run as admin ',
>>>>> follow the prompts.
>>>>> Reboot after it installs.
>>>>> Reenable all non - MS services now.
>>>>> Reboot once more.
>>>>>
>>>>> Did that get it installed properly ?
>>>>>
>>>>>
>>>>> MowGreen [MVP 2003-2009]
>>>>> ===============
>>>>> *-343-* FDNY
>>>>> Never Forgotten
>>>>> ===============
>>>>>
>>>>>
>>>>>
>>>>> Larry wrote:
>>>>>
>>>>>> I am trying to figure out why I keep getting prompted I need to d/l
>>>>>> this Security Update.
>>>>>> I have d/l'ed and installed it several times. It is not showing as an
>>>>>> installed d/l I can remove.
>>>>>> But looking at d/l'ed updates it is there a # of times. Any help is
>>>>>> much appreciated.
>>>>>>
>>>>>>

MowGreen, Just for the check of it I went to try the install. It came up
w/3 options. Modify, Repair, remove.
Which do I use, repair? Remove would take it out totally. If I use remove,
rerun the install from Update?
I wanted to check w/you before attempting this. Thanks again

"Larry" <larrym6833@msn.com> wrote in message
news:F5832ED1-043D-4A6B-8983-60EC6EFCB162@microsoft.com...

> Happy New Yr.
> Now, I did the rename w/no prob. What was throwing me off was when you
> were saying Start Search. I am used to Start > Run > Cmd (or whatever).
> Now when I go through the steps of a clean boot I have another item that
> doesn't match. I went to msconfig.
> Under General tab I checked Selective Startup, then unchecked load startup
> items. Load system services is still checked.
> When I go to the Services tab and checked Hide all MS svcs. I can only
> enable not disable them. I have d/l'ed the file already.
> For now I guess I'll just set it back to do a Normal startup. I don't
> think I missed anything, did I?
> I am trying to follow the links you gave me.
>
> Thanks again for all your time.
>
> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
> news:OmD7ZbBbJHA.5676@TK2MSFTNGP03.phx.gbl...

>> Just rename msxml4.dll at the Elevated Command Prompt, Larry. No need to
>> specify anything but that specific file. There is only one copy by that
>> name in system32.
>>

>>> Start Search, type in command, *right click* command and choose 'Run as
>>> administrator' follow the prompts

>>
>>
>> MowGreen [MVP 2003-2009]
>> ===============
>> *-343-* FDNY
>> Never Forgotten
>> ===============
>>
>>
>> Larry wrote:
>>

>>> Ok MowGreen,
>>>
>>> Please excuse my ignorance. This Is new to me. I still was still
>>> unclear on your instruction. I did however do an Inet search on
>>> "Elevated Command Prompt " and found a page explaining it a little
>>> better. Now I am still unclear on what to rename.
>>> If you see my prev. post you will see I have 3 - msxml4.dll files.
>>> Rename them all or just the 1 large file?
>>> I don't mind if you try walking me through things step by step as if I
>>> were a total novice vs. Intermediate user.
>>> Thanks again for your attn. to this problem.
>>>
>>>
>>>
>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>> news:OqH91BhaJHA.552@TK2MSFTNGP06.phx.gbl...
>>>
>>>> You need to run an ELEVATED Command Prompt or you will get an Access
>>>> Denied message, Larry. Please see my previous post to see learn how
>>>> that is accomplished.
>>>> Once you've renamed msxml4.dll from the Elevated CP, manually download
>>>> the update from the links I previously provided and *save it*.
>>>> Clean Boot the system now using the steps previously laid out.
>>>> This will stop all non - MS services from loading on boot.
>>>>
>>>> Once the system has restarted, *right* click msxml4-KB954430-enu.exe
>>>> and choose 'Run as admin ', follow the prompts.
>>>> Reboot after it installs.
>>>> Reenable all non - MS services now.
>>>> Reboot once more.
>>>>
>>>> Did that get it installed properly ?
>>>>
>>>>
>>>> MowGreen [MVP 2003-2009]
>>>> ===============
>>>> *-343-* FDNY
>>>> Never Forgotten
>>>> ===============
>>>>
>>>>
>>>>
>>>> Larry wrote:
>>>>
>>>>> MOWGreen,
>>>>> Maybe it Is good you haven't gotten to this yet. I have to correct it.
>>>>> I made a sm. error in following the web link instruction.
>>>>> I went from the run prompt of Windows itself vs. the CMD prompt. I did
>>>>> the ren again and it came back 'access denied'.
>>>>> So I went and searched out the file following the path. I found 3
>>>>> files w/that name. Each has a different date & file size.
>>>>> They are 4/18/03 4:46pm appl. ext. 1205 kb 10/9/07 2:07pm appl. ext
>>>>> 44kb and 4/18/03 4:29pm appl. ext 81kb.
>>>>> Does this help diagnose any? There are a couple of dll files that
>>>>> appear to be there more than once.
>>>>> Thanks
>>>>>
>>>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>>>> news:OOm82R5ZJHA.5520@TK2MSFTNGP02.phx.gbl...
>>>>>
>>>>>> Larry,
>>>>>>
>>>>>> There is no KB9554430. Did you mean KB954430 ?
>>>>>> If yes, then see this: http://support.microsoft.com/kb/941729
>>>>>>
>>>>>> Rename msxml4.dll by opening an Elevated Command Prompt [Start
>>>>>> Search, type in command, *right click* command and choose 'Run as
>>>>>> administrator' follow the prompts ]
>>>>>> Do NOT reinstall KB9554430 when prompted to.
>>>>>> Download and *save* it:
>>>>>> http://www.microsoft.com/downloads/d...displaylang=en
>>>>>>
>>>>>> Once the download completes close all open browsers and programs.
>>>>>> Clean Boot the system by disabling *all* non - MS services:
>>>>>> http://support.microsoft.com/kb/929135
>>>>>>
>>>>>> *Right* click msxml4-KB954430-enu.exe and choose 'Run as admin ',
>>>>>> follow the prompts.
>>>>>> Reboot after it installs.
>>>>>> Reenable all non - MS services now.
>>>>>> Reboot once more.
>>>>>>
>>>>>> Did that get it installed properly ?
>>>>>>
>>>>>>
>>>>>> MowGreen [MVP 2003-2009]
>>>>>> ===============
>>>>>> *-343-* FDNY
>>>>>> Never Forgotten
>>>>>> ===============
>>>>>>
>>>>>>
>>>>>>
>>>>>> Larry wrote:
>>>>>>
>>>>>>> I am trying to figure out why I keep getting prompted I need to d/l
>>>>>>> this Security Update.
>>>>>>> I have d/l'ed and installed it several times. It is not showing as
>>>>>>> an installed d/l I can remove.
>>>>>>> But looking at d/l'ed updates it is there a # of times. Any help is
>>>>>>> much appreciated.
>>>>>>>
>>>>>>>

MowGreen, Just for the check of it I went to try the install. It came up
w/3 options. Modify, Repair, remove.
Which do I use, repair? Remove would take it out totally. If I use remove,
rerun the install from Update?
I wanted to check w/you before attempting this. Thanks again

"Larry" <larrym6833@msn.com> wrote in message
news:F5832ED1-043D-4A6B-8983-60EC6EFCB162@microsoft.com...

> Happy New Yr.
> Now, I did the rename w/no prob. What was throwing me off was when you
> were saying Start Search. I am used to Start > Run > Cmd (or whatever).
> Now when I go through the steps of a clean boot I have another item that
> doesn't match. I went to msconfig.
> Under General tab I checked Selective Startup, then unchecked load startup
> items. Load system services is still checked.
> When I go to the Services tab and checked Hide all MS svcs. I can only
> enable not disable them. I have d/l'ed the file already.
> For now I guess I'll just set it back to do a Normal startup. I don't
> think I missed anything, did I?
> I am trying to follow the links you gave me.
>
> Thanks again for all your time.
>
> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
> news:OmD7ZbBbJHA.5676@TK2MSFTNGP03.phx.gbl...

>> Just rename msxml4.dll at the Elevated Command Prompt, Larry. No need to
>> specify anything but that specific file. There is only one copy by that
>> name in system32.
>>

>>> Start Search, type in command, *right click* command and choose 'Run as
>>> administrator' follow the prompts

>>
>>
>> MowGreen [MVP 2003-2009]
>> ===============
>> *-343-* FDNY
>> Never Forgotten
>> ===============
>>
>>
>> Larry wrote:
>>

>>> Ok MowGreen,
>>>
>>> Please excuse my ignorance. This Is new to me. I still was still
>>> unclear on your instruction. I did however do an Inet search on
>>> "Elevated Command Prompt " and found a page explaining it a little
>>> better. Now I am still unclear on what to rename.
>>> If you see my prev. post you will see I have 3 - msxml4.dll files.
>>> Rename them all or just the 1 large file?
>>> I don't mind if you try walking me through things step by step as if I
>>> were a total novice vs. Intermediate user.
>>> Thanks again for your attn. to this problem.
>>>
>>>
>>>
>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>> news:OqH91BhaJHA.552@TK2MSFTNGP06.phx.gbl...
>>>
>>>> You need to run an ELEVATED Command Prompt or you will get an Access
>>>> Denied message, Larry. Please see my previous post to see learn how
>>>> that is accomplished.
>>>> Once you've renamed msxml4.dll from the Elevated CP, manually download
>>>> the update from the links I previously provided and *save it*.
>>>> Clean Boot the system now using the steps previously laid out.
>>>> This will stop all non - MS services from loading on boot.
>>>>
>>>> Once the system has restarted, *right* click msxml4-KB954430-enu.exe
>>>> and choose 'Run as admin ', follow the prompts.
>>>> Reboot after it installs.
>>>> Reenable all non - MS services now.
>>>> Reboot once more.
>>>>
>>>> Did that get it installed properly ?
>>>>
>>>>
>>>> MowGreen [MVP 2003-2009]
>>>> ===============
>>>> *-343-* FDNY
>>>> Never Forgotten
>>>> ===============
>>>>
>>>>
>>>>
>>>> Larry wrote:
>>>>
>>>>> MOWGreen,
>>>>> Maybe it Is good you haven't gotten to this yet. I have to correct it.
>>>>> I made a sm. error in following the web link instruction.
>>>>> I went from the run prompt of Windows itself vs. the CMD prompt. I did
>>>>> the ren again and it came back 'access denied'.
>>>>> So I went and searched out the file following the path. I found 3
>>>>> files w/that name. Each has a different date & file size.
>>>>> They are 4/18/03 4:46pm appl. ext. 1205 kb 10/9/07 2:07pm appl. ext
>>>>> 44kb and 4/18/03 4:29pm appl. ext 81kb.
>>>>> Does this help diagnose any? There are a couple of dll files that
>>>>> appear to be there more than once.
>>>>> Thanks
>>>>>
>>>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>>>> news:OOm82R5ZJHA.5520@TK2MSFTNGP02.phx.gbl...
>>>>>
>>>>>> Larry,
>>>>>>
>>>>>> There is no KB9554430. Did you mean KB954430 ?
>>>>>> If yes, then see this: http://support.microsoft.com/kb/941729
>>>>>>
>>>>>> Rename msxml4.dll by opening an Elevated Command Prompt [Start
>>>>>> Search, type in command, *right click* command and choose 'Run as
>>>>>> administrator' follow the prompts ]
>>>>>> Do NOT reinstall KB9554430 when prompted to.
>>>>>> Download and *save* it:
>>>>>> http://www.microsoft.com/downloads/d...displaylang=en
>>>>>>
>>>>>> Once the download completes close all open browsers and programs.
>>>>>> Clean Boot the system by disabling *all* non - MS services:
>>>>>> http://support.microsoft.com/kb/929135
>>>>>>
>>>>>> *Right* click msxml4-KB954430-enu.exe and choose 'Run as admin ',
>>>>>> follow the prompts.
>>>>>> Reboot after it installs.
>>>>>> Reenable all non - MS services now.
>>>>>> Reboot once more.
>>>>>>
>>>>>> Did that get it installed properly ?
>>>>>>
>>>>>>
>>>>>> MowGreen [MVP 2003-2009]
>>>>>> ===============
>>>>>> *-343-* FDNY
>>>>>> Never Forgotten
>>>>>> ===============
>>>>>>
>>>>>>
>>>>>>
>>>>>> Larry wrote:
>>>>>>
>>>>>>> I am trying to figure out why I keep getting prompted I need to d/l
>>>>>>> this Security Update.
>>>>>>> I have d/l'ed and installed it several times. It is not showing as
>>>>>>> an installed d/l I can remove.
>>>>>>> But looking at d/l'ed updates it is there a # of times. Any help is
>>>>>>> much appreciated.
>>>>>>>
>>>>>>>

HNY to you, too. What happens if you choose Modify, Larry ? Does it give
you the option of installing msxml4-KB954430-enu.exe ? If not, then
choose Repair.

MowGreen [MVP 2003-2009]
===============
*-343-* FDNY
Never Forgotten
===============


Larry wrote:

> MowGreen, Just for the check of it I went to try the install. It came
> up w/3 options. Modify, Repair, remove.
> Which do I use, repair? Remove would take it out totally. If I use
> remove, rerun the install from Update?
> I wanted to check w/you before attempting this. Thanks again
>
> "Larry" <larrym6833@msn.com> wrote in message
> news:F5832ED1-043D-4A6B-8983-60EC6EFCB162@microsoft.com...
>

>> Happy New Yr.
>> Now, I did the rename w/no prob. What was throwing me off was when you
>> were saying Start Search. I am used to Start > Run > Cmd (or whatever).
>> Now when I go through the steps of a clean boot I have another item
>> that doesn't match. I went to msconfig.
>> Under General tab I checked Selective Startup, then unchecked load
>> startup items. Load system services is still checked.
>> When I go to the Services tab and checked Hide all MS svcs. I can only
>> enable not disable them. I have d/l'ed the file already.
>> For now I guess I'll just set it back to do a Normal startup. I don't
>> think I missed anything, did I?
>> I am trying to follow the links you gave me.
>>
>> Thanks again for all your time.
>>
>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>> news:OmD7ZbBbJHA.5676@TK2MSFTNGP03.phx.gbl...
>>

>>> Just rename msxml4.dll at the Elevated Command Prompt, Larry. No need
>>> to specify anything but that specific file. There is only one copy by
>>> that name in system32.
>>>
>>>> Start Search, type in command, *right click* command and choose 'Run
>>>> as administrator' follow the prompts
>>>
>>>
>>>
>>> MowGreen [MVP 2003-2009]
>>> ===============
>>> *-343-* FDNY
>>> Never Forgotten
>>> ===============
>>>
>>>
>>> Larry wrote:
>>>
>>>> Ok MowGreen,
>>>>
>>>> Please excuse my ignorance. This Is new to me. I still was still
>>>> unclear on your instruction. I did however do an Inet search on
>>>> "Elevated Command Prompt " and found a page explaining it a little
>>>> better. Now I am still unclear on what to rename.
>>>> If you see my prev. post you will see I have 3 - msxml4.dll files.
>>>> Rename them all or just the 1 large file?
>>>> I don't mind if you try walking me through things step by step as if
>>>> I were a total novice vs. Intermediate user.
>>>> Thanks again for your attn. to this problem.
>>>>
>>>>
>>>>
>>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>>> news:OqH91BhaJHA.552@TK2MSFTNGP06.phx.gbl...
>>>>
>>>>> You need to run an ELEVATED Command Prompt or you will get an
>>>>> Access Denied message, Larry. Please see my previous post to see
>>>>> learn how that is accomplished.
>>>>> Once you've renamed msxml4.dll from the Elevated CP, manually
>>>>> download the update from the links I previously provided and *save
>>>>> it*.
>>>>> Clean Boot the system now using the steps previously laid out.
>>>>> This will stop all non - MS services from loading on boot.
>>>>>
>>>>> Once the system has restarted, *right* click
>>>>> msxml4-KB954430-enu.exe and choose 'Run as admin ', follow the
>>>>> prompts.
>>>>> Reboot after it installs.
>>>>> Reenable all non - MS services now.
>>>>> Reboot once more.
>>>>>
>>>>> Did that get it installed properly ?
>>>>>
>>>>>
>>>>> MowGreen [MVP 2003-2009]
>>>>> ===============
>>>>> *-343-* FDNY
>>>>> Never Forgotten
>>>>> ===============
>>>>>
>>>>>
>>>>>
>>>>> Larry wrote:
>>>>>
>>>>>> MOWGreen,
>>>>>> Maybe it Is good you haven't gotten to this yet. I have to correct
>>>>>> it. I made a sm. error in following the web link instruction.
>>>>>> I went from the run prompt of Windows itself vs. the CMD prompt. I
>>>>>> did the ren again and it came back 'access denied'.
>>>>>> So I went and searched out the file following the path. I found 3
>>>>>> files w/that name. Each has a different date & file size.
>>>>>> They are 4/18/03 4:46pm appl. ext. 1205 kb 10/9/07 2:07pm appl.
>>>>>> ext 44kb and 4/18/03 4:29pm appl. ext 81kb.
>>>>>> Does this help diagnose any? There are a couple of dll files that
>>>>>> appear to be there more than once.
>>>>>> Thanks
>>>>>>
>>>>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>>>>> news:OOm82R5ZJHA.5520@TK2MSFTNGP02.phx.gbl...
>>>>>>
>>>>>>> Larry,
>>>>>>>
>>>>>>> There is no KB9554430. Did you mean KB954430 ?
>>>>>>> If yes, then see this: http://support.microsoft.com/kb/941729
>>>>>>>
>>>>>>> Rename msxml4.dll by opening an Elevated Command Prompt [Start
>>>>>>> Search, type in command, *right click* command and choose 'Run as
>>>>>>> administrator' follow the prompts ]
>>>>>>> Do NOT reinstall KB9554430 when prompted to.
>>>>>>> Download and *save* it:
>>>>>>> http://www.microsoft.com/downloads/d...displaylang=en
>>>>>>>
>>>>>>>
>>>>>>> Once the download completes close all open browsers and programs.
>>>>>>> Clean Boot the system by disabling *all* non - MS services:
>>>>>>> http://support.microsoft.com/kb/929135
>>>>>>>
>>>>>>> *Right* click msxml4-KB954430-enu.exe and choose 'Run as admin ',
>>>>>>> follow the prompts.
>>>>>>> Reboot after it installs.
>>>>>>> Reenable all non - MS services now.
>>>>>>> Reboot once more.
>>>>>>>
>>>>>>> Did that get it installed properly ?
>>>>>>>
>>>>>>>
>>>>>>> MowGreen [MVP 2003-2009]
>>>>>>> ===============
>>>>>>> *-343-* FDNY
>>>>>>> Never Forgotten
>>>>>>> ===============
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Larry wrote:
>>>>>>>
>>>>>>>> I am trying to figure out why I keep getting prompted I need to
>>>>>>>> d/l this Security Update.
>>>>>>>> I have d/l'ed and installed it several times. It is not showing
>>>>>>>> as an installed d/l I can remove.
>>>>>>>> But looking at d/l'ed updates it is there a # of times. Any help
>>>>>>>> is much appreciated.
>>>>>>>>
>>>>>>>>

Under Modify it shows a tree and says to 'click on the icons in the tree
before to change the way features will be installed.
Tree looks like: MSXML Parser--
=MSXML (Global
Installation)
=MSXML (side by
side)
x - XML SDK ( x over
icon)
It looks like a couple of pull downs show what it will do in ea. instance.
Going to try Repair (since I don't think we want to do anything custom).
Will post in a few results of Repair. Fingers x'ed <g>


"MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
news:u8S9b5GbJHA.4684@TK2MSFTNGP03.phx.gbl...

> HNY to you, too. What happens if you choose Modify, Larry ? Does it give
> you the option of installing msxml4-KB954430-enu.exe ? If not, then choose
> Repair.
>
> MowGreen [MVP 2003-2009]
> ===============
> *-343-* FDNY
> Never Forgotten
> ===============
>
>
> Larry wrote:
>

>> MowGreen, Just for the check of it I went to try the install. It came up
>> w/3 options. Modify, Repair, remove.
>> Which do I use, repair? Remove would take it out totally. If I use
>> remove, rerun the install from Update?
>> I wanted to check w/you before attempting this. Thanks again
>>
>> "Larry" <larrym6833@msn.com> wrote in message
>> news:F5832ED1-043D-4A6B-8983-60EC6EFCB162@microsoft.com...
>>

>>> Happy New Yr.
>>> Now, I did the rename w/no prob. What was throwing me off was when you
>>> were saying Start Search. I am used to Start > Run > Cmd (or whatever).
>>> Now when I go through the steps of a clean boot I have another item that
>>> doesn't match. I went to msconfig.
>>> Under General tab I checked Selective Startup, then unchecked load
>>> startup items. Load system services is still checked.
>>> When I go to the Services tab and checked Hide all MS svcs. I can only
>>> enable not disable them. I have d/l'ed the file already.
>>> For now I guess I'll just set it back to do a Normal startup. I don't
>>> think I missed anything, did I?
>>> I am trying to follow the links you gave me.
>>>
>>> Thanks again for all your time.
>>>
>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>> news:OmD7ZbBbJHA.5676@TK2MSFTNGP03.phx.gbl...
>>>
>>>> Just rename msxml4.dll at the Elevated Command Prompt, Larry. No need
>>>> to specify anything but that specific file. There is only one copy by
>>>> that name in system32.
>>>>
>>>>> Start Search, type in command, *right click* command and choose 'Run
>>>>> as administrator' follow the prompts
>>>>
>>>>
>>>>
>>>> MowGreen [MVP 2003-2009]
>>>> ===============
>>>> *-343-* FDNY
>>>> Never Forgotten
>>>> ===============
>>>>
>>>>
>>>> Larry wrote:
>>>>
>>>>> Ok MowGreen,
>>>>>
>>>>> Please excuse my ignorance. This Is new to me. I still was still
>>>>> unclear on your instruction. I did however do an Inet search on
>>>>> "Elevated Command Prompt " and found a page explaining it a little
>>>>> better. Now I am still unclear on what to rename.
>>>>> If you see my prev. post you will see I have 3 - msxml4.dll files.
>>>>> Rename them all or just the 1 large file?
>>>>> I don't mind if you try walking me through things step by step as if I
>>>>> were a total novice vs. Intermediate user.
>>>>> Thanks again for your attn. to this problem.
>>>>>
>>>>>
>>>>>
>>>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>>>> news:OqH91BhaJHA.552@TK2MSFTNGP06.phx.gbl...
>>>>>
>>>>>> You need to run an ELEVATED Command Prompt or you will get an Access
>>>>>> Denied message, Larry. Please see my previous post to see learn how
>>>>>> that is accomplished.
>>>>>> Once you've renamed msxml4.dll from the Elevated CP, manually
>>>>>> download the update from the links I previously provided and *save
>>>>>> it*.
>>>>>> Clean Boot the system now using the steps previously laid out.
>>>>>> This will stop all non - MS services from loading on boot.
>>>>>>
>>>>>> Once the system has restarted, *right* click msxml4-KB954430-enu.exe
>>>>>> and choose 'Run as admin ', follow the prompts.
>>>>>> Reboot after it installs.
>>>>>> Reenable all non - MS services now.
>>>>>> Reboot once more.
>>>>>>
>>>>>> Did that get it installed properly ?
>>>>>>
>>>>>>
>>>>>> MowGreen [MVP 2003-2009]
>>>>>> ===============
>>>>>> *-343-* FDNY
>>>>>> Never Forgotten
>>>>>> ===============
>>>>>>
>>>>>>
>>>>>>
>>>>>> Larry wrote:
>>>>>>
>>>>>>> MOWGreen,
>>>>>>> Maybe it Is good you haven't gotten to this yet. I have to correct
>>>>>>> it. I made a sm. error in following the web link instruction.
>>>>>>> I went from the run prompt of Windows itself vs. the CMD prompt. I
>>>>>>> did the ren again and it came back 'access denied'.
>>>>>>> So I went and searched out the file following the path. I found 3
>>>>>>> files w/that name. Each has a different date & file size.
>>>>>>> They are 4/18/03 4:46pm appl. ext. 1205 kb 10/9/07 2:07pm appl. ext
>>>>>>> 44kb and 4/18/03 4:29pm appl. ext 81kb.
>>>>>>> Does this help diagnose any? There are a couple of dll files that
>>>>>>> appear to be there more than once.
>>>>>>> Thanks
>>>>>>>
>>>>>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>>>>>> news:OOm82R5ZJHA.5520@TK2MSFTNGP02.phx.gbl...
>>>>>>>
>>>>>>>> Larry,
>>>>>>>>
>>>>>>>> There is no KB9554430. Did you mean KB954430 ?
>>>>>>>> If yes, then see this: http://support.microsoft.com/kb/941729
>>>>>>>>
>>>>>>>> Rename msxml4.dll by opening an Elevated Command Prompt [Start
>>>>>>>> Search, type in command, *right click* command and choose 'Run as
>>>>>>>> administrator' follow the prompts ]
>>>>>>>> Do NOT reinstall KB9554430 when prompted to.
>>>>>>>> Download and *save* it:
>>>>>>>> http://www.microsoft.com/downloads/d...displaylang=en
>>>>>>>>
>>>>>>>> Once the download completes close all open browsers and programs.
>>>>>>>> Clean Boot the system by disabling *all* non - MS services:
>>>>>>>> http://support.microsoft.com/kb/929135
>>>>>>>>
>>>>>>>> *Right* click msxml4-KB954430-enu.exe and choose 'Run as admin ',
>>>>>>>> follow the prompts.
>>>>>>>> Reboot after it installs.
>>>>>>>> Reenable all non - MS services now.
>>>>>>>> Reboot once more.
>>>>>>>>
>>>>>>>> Did that get it installed properly ?
>>>>>>>>
>>>>>>>>
>>>>>>>> MowGreen [MVP 2003-2009]
>>>>>>>> ===============
>>>>>>>> *-343-* FDNY
>>>>>>>> Never Forgotten
>>>>>>>> ===============
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Larry wrote:
>>>>>>>>
>>>>>>>>> I am trying to figure out why I keep getting prompted I need to
>>>>>>>>> d/l this Security Update.
>>>>>>>>> I have d/l'ed and installed it several times. It is not showing as
>>>>>>>>> an installed d/l I can remove.
>>>>>>>>> But looking at d/l'ed updates it is there a # of times. Any help
>>>>>>>>> is much appreciated.
>>>>>>>>>
>>>>>>>>>

Ok so it looks like my attempt to diagram didn't come out so well.
Anyway the update Still shows in Windows Update. (:
If I try remove, what do I do try and run it from Update again,
because I do not see an install option when I run the file.
I figure I'd check before trying.

"Larry" <larrym6833@msn.com> wrote in message
news:4396B7B2-3B90-4D9B-BF06-F634A566D5B3@microsoft.com...

> Under Modify it shows a tree and says to 'click on the icons in the tree
> before to change the way features will be installed.
> Tree looks like: MSXML Parser--
> =MSXML (Global
> Installation)
> =MSXML (side by
> side)
> x - XML SDK ( x over
> icon)
> It looks like a couple of pull downs show what it will do in ea. instance.
> Going to try Repair (since I don't think we want to do anything custom).
> Will post in a few results of Repair. Fingers x'ed <g>
>
>
> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
> news:u8S9b5GbJHA.4684@TK2MSFTNGP03.phx.gbl...

>> HNY to you, too. What happens if you choose Modify, Larry ? Does it give
>> you the option of installing msxml4-KB954430-enu.exe ? If not, then
>> choose Repair.
>>
>> MowGreen [MVP 2003-2009]
>> ===============
>> *-343-* FDNY
>> Never Forgotten
>> ===============
>>
>>
>> Larry wrote:
>>

>>> MowGreen, Just for the check of it I went to try the install. It came
>>> up w/3 options. Modify, Repair, remove.
>>> Which do I use, repair? Remove would take it out totally. If I use
>>> remove, rerun the install from Update?
>>> I wanted to check w/you before attempting this. Thanks again
>>>
>>> "Larry" <larrym6833@msn.com> wrote in message
>>> news:F5832ED1-043D-4A6B-8983-60EC6EFCB162@microsoft.com...
>>>
>>>> Happy New Yr.
>>>> Now, I did the rename w/no prob. What was throwing me off was when you
>>>> were saying Start Search. I am used to Start > Run > Cmd (or whatever).
>>>> Now when I go through the steps of a clean boot I have another item
>>>> that doesn't match. I went to msconfig.
>>>> Under General tab I checked Selective Startup, then unchecked load
>>>> startup items. Load system services is still checked.
>>>> When I go to the Services tab and checked Hide all MS svcs. I can only
>>>> enable not disable them. I have d/l'ed the file already.
>>>> For now I guess I'll just set it back to do a Normal startup. I don't
>>>> think I missed anything, did I?
>>>> I am trying to follow the links you gave me.
>>>>
>>>> Thanks again for all your time.
>>>>
>>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>>> news:OmD7ZbBbJHA.5676@TK2MSFTNGP03.phx.gbl...
>>>>
>>>>> Just rename msxml4.dll at the Elevated Command Prompt, Larry. No need
>>>>> to specify anything but that specific file. There is only one copy by
>>>>> that name in system32.
>>>>>
>>>>>> Start Search, type in command, *right click* command and choose 'Run
>>>>>> as administrator' follow the prompts
>>>>>
>>>>>
>>>>>
>>>>> MowGreen [MVP 2003-2009]
>>>>> ===============
>>>>> *-343-* FDNY
>>>>> Never Forgotten
>>>>> ===============
>>>>>
>>>>>
>>>>> Larry wrote:
>>>>>
>>>>>> Ok MowGreen,
>>>>>>
>>>>>> Please excuse my ignorance. This Is new to me. I still was still
>>>>>> unclear on your instruction. I did however do an Inet search on
>>>>>> "Elevated Command Prompt " and found a page explaining it a little
>>>>>> better. Now I am still unclear on what to rename.
>>>>>> If you see my prev. post you will see I have 3 - msxml4.dll files.
>>>>>> Rename them all or just the 1 large file?
>>>>>> I don't mind if you try walking me through things step by step as if
>>>>>> I were a total novice vs. Intermediate user.
>>>>>> Thanks again for your attn. to this problem.
>>>>>>
>>>>>>
>>>>>>
>>>>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>>>>> news:OqH91BhaJHA.552@TK2MSFTNGP06.phx.gbl...
>>>>>>
>>>>>>> You need to run an ELEVATED Command Prompt or you will get an Access
>>>>>>> Denied message, Larry. Please see my previous post to see learn how
>>>>>>> that is accomplished.
>>>>>>> Once you've renamed msxml4.dll from the Elevated CP, manually
>>>>>>> download the update from the links I previously provided and *save
>>>>>>> it*.
>>>>>>> Clean Boot the system now using the steps previously laid out.
>>>>>>> This will stop all non - MS services from loading on boot.
>>>>>>>
>>>>>>> Once the system has restarted, *right* click msxml4-KB954430-enu.exe
>>>>>>> and choose 'Run as admin ', follow the prompts.
>>>>>>> Reboot after it installs.
>>>>>>> Reenable all non - MS services now.
>>>>>>> Reboot once more.
>>>>>>>
>>>>>>> Did that get it installed properly ?
>>>>>>>
>>>>>>>
>>>>>>> MowGreen [MVP 2003-2009]
>>>>>>> ===============
>>>>>>> *-343-* FDNY
>>>>>>> Never Forgotten
>>>>>>> ===============
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Larry wrote:
>>>>>>>
>>>>>>>> MOWGreen,
>>>>>>>> Maybe it Is good you haven't gotten to this yet. I have to correct
>>>>>>>> it. I made a sm. error in following the web link instruction.
>>>>>>>> I went from the run prompt of Windows itself vs. the CMD prompt. I
>>>>>>>> did the ren again and it came back 'access denied'.
>>>>>>>> So I went and searched out the file following the path. I found 3
>>>>>>>> files w/that name. Each has a different date & file size.
>>>>>>>> They are 4/18/03 4:46pm appl. ext. 1205 kb 10/9/07 2:07pm appl.
>>>>>>>> ext 44kb and 4/18/03 4:29pm appl. ext 81kb.
>>>>>>>> Does this help diagnose any? There are a couple of dll files that
>>>>>>>> appear to be there more than once.
>>>>>>>> Thanks
>>>>>>>>
>>>>>>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>>>>>>> news:OOm82R5ZJHA.5520@TK2MSFTNGP02.phx.gbl...
>>>>>>>>
>>>>>>>>> Larry,
>>>>>>>>>
>>>>>>>>> There is no KB9554430. Did you mean KB954430 ?
>>>>>>>>> If yes, then see this: http://support.microsoft.com/kb/941729
>>>>>>>>>
>>>>>>>>> Rename msxml4.dll by opening an Elevated Command Prompt [Start
>>>>>>>>> Search, type in command, *right click* command and choose 'Run as
>>>>>>>>> administrator' follow the prompts ]
>>>>>>>>> Do NOT reinstall KB9554430 when prompted to.
>>>>>>>>> Download and *save* it:
>>>>>>>>> http://www.microsoft.com/downloads/d...displaylang=en
>>>>>>>>>
>>>>>>>>> Once the download completes close all open browsers and programs.
>>>>>>>>> Clean Boot the system by disabling *all* non - MS services:
>>>>>>>>> http://support.microsoft.com/kb/929135
>>>>>>>>>
>>>>>>>>> *Right* click msxml4-KB954430-enu.exe and choose 'Run as admin ',
>>>>>>>>> follow the prompts.
>>>>>>>>> Reboot after it installs.
>>>>>>>>> Reenable all non - MS services now.
>>>>>>>>> Reboot once more.
>>>>>>>>>
>>>>>>>>> Did that get it installed properly ?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> MowGreen [MVP 2003-2009]
>>>>>>>>> ===============
>>>>>>>>> *-343-* FDNY
>>>>>>>>> Never Forgotten
>>>>>>>>> ===============
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Larry wrote:
>>>>>>>>>
>>>>>>>>>> I am trying to figure out why I keep getting prompted I need to
>>>>>>>>>> d/l this Security Update.
>>>>>>>>>> I have d/l'ed and installed it several times. It is not showing
>>>>>>>>>> as an installed d/l I can remove.
>>>>>>>>>> But looking at d/l'ed updates it is there a # of times. Any help
>>>>>>>>>> is much appreciated.
>>>>>>>>>>
>>>>>>>>>>