lexmark x75 printer trouble.

hi there, i have tryed the latext driver from the lexmark site, but will not
allow me to install the criver. It come up with the 16 bit windows sub system
box saying, This program is not suitable for running in MS DOS and windows
applications.

Run a System File Check..... from the Command Prompt, type

sfc /scannow

(note the space between the c and the /)

This will check the system files on the PC and replace any that may be
corrupted. After it finishes, reboot the PC and try the printer
installation again.
--
Cari (MS-MVP Printing, Imaging & Hardware)
www.coribright.com

"camladuk" <camladuk@discussions.microsoft.com> wrote in message
news:5941AB8B-886D-4DF2-8E0F-BCD336F88774@microsoft.com...

> hi there, i have tryed the latext driver from the lexmark site, but will
> not
> allow me to install the criver. It come up with the 16 bit windows sub
> system
> box saying, This program is not suitable for running in MS DOS and windows
> applications.
>

Same problem I am having .Did you try and load windows xp
service pack 2? If so thats where your problem lies.
Microsoft is working on it at least from what I have been
told.

Good luck

Tom

>-----Original Message-----
>Hi there. I am trying to install my lexmark x75 all in

one printer to my xp

>computer, but every time i try and install the drivers

for it it comes up

>with an error mesasage saying " the file system is not

suitable for running

>MS-DOS and microsoft windows applications. chose close

to terminate the

>application." At the top of the message it say 16 bit

windows subsystem. ANY

>help would be greatly recieved!!
>
>.
>