LifeCam application crashes on Vista RTM

>
> "paulp" <paulp@discussions.microsoft.com> wrote in message
> news:1609A2C1-64B1-4F45-9AE7-C36C90FE043D@microsoft.com...

> >I just installed the new Vista drivers and application for my VX-6000 from
> > the hardware site and while the drivers install fine and the camera seems
> > to
> > work (tried it with Messenger), when I launch the application
> > (LifeCam.exe),
> > I get the following error message: "LifeCam.exe has stopped working"
> >
> > I uninstalled and reinstalled 3 times, installed with the camera
> > unplugged,
> > installed with it plugged in, rebooted etc. etc. No luck.
> >
> > Is there anything I can check here?

>
> Have you tried these drivers below?
> I have the same camera but Vista Ultimate -
> and it works fine for me, although the quality of picture and utilities
> are
> inferior to Logitech Webcam Orbit for Win XP . Unfortunately that are no
> drivers from Logitech for this Webcam.
> ...............
>
> Microsoft LifeCam software updates are now available for the 32-bit and
> 64-bit editions of Windows Vista. Microsoft LifeChat products will be
> available by February 2007; compatible Windows Vista software will be
> available at product release.
>
> http://www.microsoft.com/hardware/di...indows%20Vista
>

> Thanks for the response JDR. Yes, I'm using the "RTM" drivers posted to the
> /hardware site. That's what's so frustrating!
>
>
> "Jdr" wrote:
>

> >
> > "paulp" <paulp@discussions.microsoft.com> wrote in message
> > news:1609A2C1-64B1-4F45-9AE7-C36C90FE043D@microsoft.com...

> > >I just installed the new Vista drivers and application for my VX-6000 from
> > > the hardware site and while the drivers install fine and the camera seems
> > > to
> > > work (tried it with Messenger), when I launch the application
> > > (LifeCam.exe),
> > > I get the following error message: "LifeCam.exe has stopped working"
> > >
> > > I uninstalled and reinstalled 3 times, installed with the camera
> > > unplugged,
> > > installed with it plugged in, rebooted etc. etc. No luck.
> > >
> > > Is there anything I can check here?

> >
> > Have you tried these drivers below?
> > I have the same camera but Vista Ultimate -
> > and it works fine for me, although the quality of picture and utilities
> > are
> > inferior to Logitech Webcam Orbit for Win XP . Unfortunately that are no
> > drivers from Logitech for this Webcam.
> > ...............
> >
> > Microsoft LifeCam software updates are now available for the 32-bit and
> > 64-bit editions of Windows Vista. Microsoft LifeChat products will be
> > available by February 2007; compatible Windows Vista software will be
> > available at product release.
> >
> > http://www.microsoft.com/hardware/di...indows%20Vista
> >

> Ditto, same problem here.
>
> EggHeadCafe.com - .NET Developer Portal of Choice
> http://www.eggheadcafe.com

> I just installed the new Vista drivers and application for my VX-6000 from
> the hardware site and while the drivers install fine and the camera seems to
> work (tried it with Messenger), when I launch the application (LifeCam.exe),
> I get the following error message: "LifeCam.exe has stopped working"
>
> I uninstalled and reinstalled 3 times, installed with the camera unplugged,
> installed with it plugged in, rebooted etc. etc. No luck.
>
> Is there anything I can check here?

> Hi,
>
> Same case here. I'm using RTM version of Vista Enterprise and Vista
> Drivers and Applicaiton for VX-6000. The camera works fine with
> Windows Live Messenger, but when I try to open LifeCam application I
> get the error message: "lifecam has stopped working".
>
> Jaime
>

>I had the similar problem but the problem was gone after installing update
> for Vista KB925528 from here:
>
> http://support.microsoft.com/kb/925528
>
> Try this....
>
>
>
> "paulp" wrote:
>

>> I just installed the new Vista drivers and application for my VX-6000
>> from
>> the hardware site and while the drivers install fine and the camera seems
>> to
>> work (tried it with Messenger), when I launch the application
>> (LifeCam.exe),
>> I get the following error message: "LifeCam.exe has stopped working"
>>
>> I uninstalled and reinstalled 3 times, installed with the camera
>> unplugged,
>> installed with it plugged in, rebooted etc. etc. No luck.
>>
>> Is there anything I can check here?

>I have instaled update kb925528 and still LifeCam.exe crashes
>
>
> "espoir" <espoir@discussions.microsoft.com> wrote in message
> news:8BF53984-68C7-4F71-8A35-F67207DD8383@microsoft.com...

>>I had the similar problem but the problem was gone after installing update
>> for Vista KB925528 from here:
>>
>> http://support.microsoft.com/kb/925528
>>
>> Try this....
>>
>>
>>
>> "paulp" wrote:
>>

>>> I just installed the new Vista drivers and application for my VX-6000
>>> from
>>> the hardware site and while the drivers install fine and the camera
>>> seems to
>>> work (tried it with Messenger), when I launch the application
>>> (LifeCam.exe),
>>> I get the following error message: "LifeCam.exe has stopped working"
>>>
>>> I uninstalled and reinstalled 3 times, installed with the camera
>>> unplugged,
>>> installed with it plugged in, rebooted etc. etc. No luck.
>>>
>>> Is there anything I can check here?

>