Lightscribe

Posted: 11-22-2006, 12:03 AM

Gene

Guest
Posts: n/a

For those who may have not seen it in the general group.

You can install your lightscribe drivers on Vista. Download them from the
Lightscribe website, right click on the set-up program, and choose
"Properties." When the properties box comes up, go to the "Compatibility
tab" click the box and run under winXP SP2.

Then save and close. Next, all you have to do is right click, "Run as
Administrator" and let it install. If you see no action for a couple
minutes, just relax, let it figure itself out. The next thing you will see
is "Program installed"

Burn and label away :-)

Responses to "Lightscribe"

Dixie

Guest
Posts: n/a

RE: Lightscribe

Posted: 02-14-2007, 07:02 AM

Gene:

I have a Pavilion a1020N. After upgrading to Vista, the lightscribe does
not work, but the drive does read/write. I downloaded the vista drivers from
lightscribe.com and I also found a program on HP site. When I attempted to
run these programs, I got the same message "The operating system is not
adequate for running LS_HSI"

I following your instructions to the letter but got the same results. Any
ideas? I have contact HP twice but they do not understand it's a driver
problem. They keep saying it's the program I'm using but I have the program
they recommended (Roxio 9) but without a lightscribe driver, it's not capable
of buring a label.

Thanks

"Gene" wrote:

> For those who may have not seen it in the general group.
>
> You can install your lightscribe drivers on Vista. Download them from the
> Lightscribe website, right click on the set-up program, and choose
> "Properties." When the properties box comes up, go to the "Compatibility
> tab" click the box and run under winXP SP2.
>
> Then save and close. Next, all you have to do is right click, "Run as
> Administrator" and let it install. If you see no action for a couple
> minutes, just relax, let it figure itself out. The next thing you will see
> is "Program installed"
>
> Burn and label away :-)
>

Richard G. Harper

Guest
Posts: n/a

Re: Lightscribe

Posted: 02-14-2007, 10:29 AM

There is a Lightscribe update for Vista available:

http://www.lightscribe.com/downloadS...ows/index.aspx

--
Richard G. Harper [MVP Shell/User] rgharper@gmail.com
* NEW! Catch my blog ... http://msmvps.com/blogs/rgharper/
* PLEASE post all messages and replies in the newsgroups
* The Website - http://rgharper.mvps.org/
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm

"Dixie" <Dixie@discussions.microsoft.com> wrote in message
news

6BBD120-C730-42A1-A736-40E039FFD204@microsoft.com...

> Gene:
>
> I have a Pavilion a1020N. After upgrading to Vista, the lightscribe does
> not work, but the drive does read/write. I downloaded the vista drivers
> from
> lightscribe.com and I also found a program on HP site. When I attempted
> to
> run these programs, I got the same message "The operating system is not
> adequate for running LS_HSI"
>
> I following your instructions to the letter but got the same results. Any
> ideas? I have contact HP twice but they do not understand it's a driver
> problem. They keep saying it's the program I'm using but I have the
> program
> they recommended (Roxio 9) but without a lightscribe driver, it's not
> capable
> of buring a label.
>
> Thanks
>
> "Gene" wrote:
>
>> For those who may have not seen it in the general group.
>>
>> You can install your lightscribe drivers on Vista. Download them from the
>> Lightscribe website, right click on the set-up program, and choose
>> "Properties." When the properties box comes up, go to the "Compatibility
>> tab" click the box and run under winXP SP2.
>>
>> Then save and close. Next, all you have to do is right click, "Run as
>> Administrator" and let it install. If you see no action for a couple
>> minutes, just relax, let it figure itself out. The next thing you will
>> see
>> is "Program installed"
>>
>> Burn and label away :-)
>>

Dixie

Guest
Posts: n/a

Re: Lightscribe

Posted: 02-14-2007, 03:00 PM

Thank you for replying Richard. However, as I stated in my original post, I
have already gone to the lightscribe website, but when I attempted to run the
setup program to download the software into my computer, I get the error
message "Your operating system is inadequate for running LS_HSI. I also tried
Gene's suggestion to change the Compatibility properies to XP pack 2 and then
run as a administrator. Has anyone had this problem and did you find a
solution.

"Richard G. Harper" wrote:

> There is a Lightscribe update for Vista available:
>
> http://www.lightscribe.com/downloadS...ows/index.aspx
>
> --
> Richard G. Harper [MVP Shell/User] rgharper@gmail.com
> * NEW! Catch my blog ... http://msmvps.com/blogs/rgharper/
> * PLEASE post all messages and replies in the newsgroups
> * The Website - http://rgharper.mvps.org/
> * HELP us help YOU ... http://www.dts-l.org/goodpost.htm
>
>
> "Dixie" <Dixie@discussions.microsoft.com> wrote in message
> news6BBD120-C730-42A1-A736-40E039FFD204@microsoft.com...
> > Gene:
> >
> > I have a Pavilion a1020N. After upgrading to Vista, the lightscribe does
> > not work, but the drive does read/write. I downloaded the vista drivers
> > from
> > lightscribe.com and I also found a program on HP site. When I attempted
> > to
> > run these programs, I got the same message "The operating system is not
> > adequate for running LS_HSI"
> >
> > I following your instructions to the letter but got the same results. Any
> > ideas? I have contact HP twice but they do not understand it's a driver
> > problem. They keep saying it's the program I'm using but I have the
> > program
> > they recommended (Roxio 9) but without a lightscribe driver, it's not
> > capable
> > of buring a label.
> >
> > Thanks
> >
> > "Gene" wrote:
> >
> >> For those who may have not seen it in the general group.
> >>
> >> You can install your lightscribe drivers on Vista. Download them from the
> >> Lightscribe website, right click on the set-up program, and choose
> >> "Properties." When the properties box comes up, go to the "Compatibility
> >> tab" click the box and run under winXP SP2.
> >>
> >> Then save and close. Next, all you have to do is right click, "Run as
> >> Administrator" and let it install. If you see no action for a couple
> >> minutes, just relax, let it figure itself out. The next thing you will
> >> see
> >> is "Program installed"
> >>
> >> Burn and label away :-)
> >>

>
>
>

Dixie

Guest
Posts: n/a

Re: Lightscribe

Posted: 02-14-2007, 03:04 PM

Thank you for responding Richard. However, as I stated in my original post,
I have already accessed the lightscribe.com website. I downloaded the
program, I followed the steps Gene wrote about, but when I attempt to
download the program to my computer, I get the error message "the operating
system is not adequate for running LS-HSI"

Has anyone else had a problem like this and they you find a solution? I
would go out and buy another Lightscribe drive but I'm afraid Vista won't
support the new DVD.

"Richard G. Harper" wrote:

> There is a Lightscribe update for Vista available:
>
> http://www.lightscribe.com/downloadS...ows/index.aspx
>
> --
> Richard G. Harper [MVP Shell/User] rgharper@gmail.com
> * NEW! Catch my blog ... http://msmvps.com/blogs/rgharper/
> * PLEASE post all messages and replies in the newsgroups
> * The Website - http://rgharper.mvps.org/
> * HELP us help YOU ... http://www.dts-l.org/goodpost.htm
>
>
> "Dixie" <Dixie@discussions.microsoft.com> wrote in message
> news6BBD120-C730-42A1-A736-40E039FFD204@microsoft.com...
> > Gene:
> >
> > I have a Pavilion a1020N. After upgrading to Vista, the lightscribe does
> > not work, but the drive does read/write. I downloaded the vista drivers
> > from
> > lightscribe.com and I also found a program on HP site. When I attempted
> > to
> > run these programs, I got the same message "The operating system is not
> > adequate for running LS_HSI"
> >
> > I following your instructions to the letter but got the same results. Any
> > ideas? I have contact HP twice but they do not understand it's a driver
> > problem. They keep saying it's the program I'm using but I have the
> > program
> > they recommended (Roxio 9) but without a lightscribe driver, it's not
> > capable
> > of buring a label.
> >
> > Thanks
> >
> > "Gene" wrote:
> >
> >> For those who may have not seen it in the general group.
> >>
> >> You can install your lightscribe drivers on Vista. Download them from the
> >> Lightscribe website, right click on the set-up program, and choose
> >> "Properties." When the properties box comes up, go to the "Compatibility
> >> tab" click the box and run under winXP SP2.
> >>
> >> Then save and close. Next, all you have to do is right click, "Run as
> >> Administrator" and let it install. If you see no action for a couple
> >> minutes, just relax, let it figure itself out. The next thing you will
> >> see
> >> is "Program installed"
> >>
> >> Burn and label away :-)
> >>

>
>
>

walkerdrew

Guest
Posts: n/a

lightscribe

Posted: 06-15-2008, 01:13 PM

bought a new asus with lightscribe technology and my device manager keeps
saying no lightscribe device detected. what do i need to do to be able to use
my lightscribe program?

PvdG42

Guest
Posts: n/a

Re: lightscribe

Posted: 06-15-2008, 02:11 PM

"walkerdrew" <walkerdrew@discussions.microsoft.com> wrote in message
news:C8B6E828-4DFE-4E26-A4A3-52F12CB4A8EF@microsoft.com...

> bought a new asus with lightscribe technology and my device manager keeps
> saying no lightscribe device detected. what do i need to do to be able to
> use
> my lightscribe program?

Have you contacted Asus technical support? They should be able to help you
get your Lightscribe drive working.

Peter

Guest
Posts: n/a

Re: lightscribe

Posted: 06-15-2008, 02:58 PM

In order to use your Lightscribe bruner, first make sure the drive Firmware
is up to date (from the drive manufacturer's website) and then you will have
to install the Lightscribe software. Usually it's included in the CD that
accompanies the drive, but to ensure you get the latest look here:
http://www.lightscribe.com/

--
Peter
Toronto, Canada
XP Pro SP3 x 2/Vista Ultimate SP1
Triple Boot

"walkerdrew" <walkerdrew@discussions.microsoft.com> wrote in message
news:C8B6E828-4DFE-4E26-A4A3-52F12CB4A8EF@microsoft.com...

> bought a new asus with lightscribe technology and my device manager keeps
> saying no lightscribe device detected. what do i need to do to be able to
> use
> my lightscribe program?

Peter

Guest
Posts: n/a

Re: lightscribe

Posted: 06-15-2008, 03:00 PM

....for bruner, please read burner. Sorry.

--
Peter
Toronto, Canada
XP Pro SP3 x 2/Vista Ultimate SP1
Triple Boot

"walkerdrew" <walkerdrew@discussions.microsoft.com> wrote in message
news:C8B6E828-4DFE-4E26-A4A3-52F12CB4A8EF@microsoft.com...

> bought a new asus with lightscribe technology and my device manager keeps
> saying no lightscribe device detected. what do i need to do to be able to
> use
> my lightscribe program?

LinkBack

Thread Tools

Display Modes

« Charging Battery | sound device »

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New LightScribe Diagnostics Utility 5-17-2007	Cal Bear '66	Windows Vista Performance & Maintenance	0	05-19-2007 05:37 PM
lightscribe DVD burner	Steven Wabik	Windows Vista Hardware & Devices	4	07-05-2006 07:57 PM
lightscribe support	Steven Wabik	Windows Vista Install & Setup	2	07-05-2006 03:48 AM
Lightscribe with Vista Beta 2	Ducktape	Windows Vista Hardware & Devices	4	06-18-2006 04:11 PM
Lightscribe Support in Vista Beta 2	Casual_Innovation	Windows Vista Hardware & Devices	1	06-15-2006 05:28 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90