make Sandink make non-removable

Posted: 10-14-2003, 01:12 PM
Hi Guys

I tried to cntact sandink but they didnīt response
is their another way to get this tool?

i need it very fast!

regards


Reply With Quote

Responses to "make Sandink make non-removable"

Heidi Linda eMVP
Guest
Posts: n/a
 
Re: make Sandink make non-removable
Posted: 10-14-2003, 01:14 PM
No. The tool is *only* available from Sandisk, and you need to sign a
Non-Disclosure agreement.
AS I told you in another thread, the gentleman you need to talk to is Tuan
Dinh Hoang, tdhoang@sandisk.com

"Micha" <mgarbsch@unterderbruecke.de> wrote in message
news:uc7UVykkDHA.3316@TK2MSFTNGP11.phx.gbl...
> Hi Guys
>
> I tried to cntact sandink but they didnīt response
> is their another way to get this tool?
>
> i need it very fast!
>
> regards
>
>

Reply With Quote
Micha
Guest
Posts: n/a
 
Re: make Sandink make non-removable
Posted: 10-14-2003, 02:29 PM
hmm ok so i have to wait a little bit longer


"Heidi Linda eMVP" <hll@bts.co.uk> wrote in message
news:Odr081kkDHA.1740@TK2MSFTNGP12.phx.gbl...
> No. The tool is *only* available from Sandisk, and you need to sign a
> Non-Disclosure agreement.
> AS I told you in another thread, the gentleman you need to talk to is Tuan
> Dinh Hoang, tdhoang@sandisk.com
>
> "Micha" <mgarbsch@unterderbruecke.de> wrote in message
> news:uc7UVykkDHA.3316@TK2MSFTNGP11.phx.gbl...
> > Hi Guys
> >
> > I tried to cntact sandink but they didnīt response
> > is their another way to get this tool?
> >
> > i need it very fast!
> >
> > regards
> >
> >
>
>

Reply With Quote
Heidi Linda eMVP
Guest
Posts: n/a
 
Re: make Sandink make non-removable
Posted: 10-14-2003, 02:54 PM
Afraid so. Those of us who have the tool aren't allowed to give it to anyone
else.
However, I have had cards from Transcend and Unigen already marked
non-removable.

"Micha" <mgarbsch@unterderbruecke.de> wrote in message
news:e1MYQdlkDHA.3316@tk2msftngp13.phx.gbl...
> hmm ok so i have to wait a little bit longer
>
>
> "Heidi Linda eMVP" <hll@bts.co.uk> wrote in message
> news:Odr081kkDHA.1740@TK2MSFTNGP12.phx.gbl...
> > No. The tool is *only* available from Sandisk, and you need to sign a
> > Non-Disclosure agreement.
> > AS I told you in another thread, the gentleman you need to talk to is
Tuan
> > Dinh Hoang, tdhoang@sandisk.com
> >
> > "Micha" <mgarbsch@unterderbruecke.de> wrote in message
> > news:uc7UVykkDHA.3316@TK2MSFTNGP11.phx.gbl...
> > > Hi Guys
> > >
> > > I tried to cntact sandink but they didnīt response
> > > is their another way to get this tool?
> > >
> > > i need it very fast!
> > >
> > > regards
> > >
> > >
> >
> >
>
>

Reply With Quote
aikwee
Guest
Posts: n/a
 
Re: make Sandink make non-removable
Posted: 10-14-2003, 04:32 PM
i found that pretech (http://www.pretec.com/) can provide the tools
freely.(at least for me) :-) without signing any agreement....

i have tested it . you just need to tell them the model of the CF and
they'll happily email the tool for you.(at least for me)

"Heidi Linda eMVP" <hll@bts.co.uk> wrote in message
news:euIHIulkDHA.3320@tk2msftngp13.phx.gbl...
> Afraid so. Those of us who have the tool aren't allowed to give it to
anyone
> else.
> However, I have had cards from Transcend and Unigen already marked
> non-removable.
>
> "Micha" <mgarbsch@unterderbruecke.de> wrote in message
> news:e1MYQdlkDHA.3316@tk2msftngp13.phx.gbl...
> > hmm ok so i have to wait a little bit longer
> >
> >
> > "Heidi Linda eMVP" <hll@bts.co.uk> wrote in message
> > news:Odr081kkDHA.1740@TK2MSFTNGP12.phx.gbl...
> > > No. The tool is *only* available from Sandisk, and you need to sign a
> > > Non-Disclosure agreement.
> > > AS I told you in another thread, the gentleman you need to talk to is
> Tuan
> > > Dinh Hoang, tdhoang@sandisk.com
> > >
> > > "Micha" <mgarbsch@unterderbruecke.de> wrote in message
> > > news:uc7UVykkDHA.3316@TK2MSFTNGP11.phx.gbl...
> > > > Hi Guys
> > > >
> > > > I tried to cntact sandink but they didnīt response
> > > > is their another way to get this tool?
> > > >
> > > > i need it very fast!
> > > >
> > > > regards
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Reply With Quote
BeeFarmer
Guest
Posts: n/a
 
Re: make Sandink make non-removable
Posted: 10-14-2003, 07:35 PM
They sent me an agreement to sign just about 2 hours ago.. however I am
using Transcend CF and
don't have a serial number to give them for a SanDisk.

--




"Micha" <mgarbsch@unterderbruecke.de> wrote in message
news:e1MYQdlkDHA.3316@tk2msftngp13.phx.gbl...
> hmm ok so i have to wait a little bit longer
>
>
> "Heidi Linda eMVP" <hll@bts.co.uk> wrote in message
> news:Odr081kkDHA.1740@TK2MSFTNGP12.phx.gbl...
> > No. The tool is *only* available from Sandisk, and you need to sign a
> > Non-Disclosure agreement.
> > AS I told you in another thread, the gentleman you need to talk to is
Tuan
> > Dinh Hoang, tdhoang@sandisk.com
> >
> > "Micha" <mgarbsch@unterderbruecke.de> wrote in message
> > news:uc7UVykkDHA.3316@TK2MSFTNGP11.phx.gbl...
> > > Hi Guys
> > >
> > > I tried to cntact sandink but they didnīt response
> > > is their another way to get this tool?
> > >
> > > i need it very fast!
> > >
> > > regards
> > >
> > >
> >
> >
>
>

Reply With Quote
BeeFarmer
Guest
Posts: n/a
 
Re: make Sandink make non-removable
Posted: 10-14-2003, 07:35 PM
Do you have an email address or contact number for Pretec?



"aikwee" <aikwee@spammer.com> wrote in message
news:OrwiYhmkDHA.372@TK2MSFTNGP11.phx.gbl...
> i found that pretech (http://www.pretec.com/) can provide the tools
> freely.(at least for me) :-) without signing any agreement....
>
> i have tested it . you just need to tell them the model of the CF and
> they'll happily email the tool for you.(at least for me)
>
> "Heidi Linda eMVP" <hll@bts.co.uk> wrote in message
> news:euIHIulkDHA.3320@tk2msftngp13.phx.gbl...
> > Afraid so. Those of us who have the tool aren't allowed to give it to
> anyone
> > else.
> > However, I have had cards from Transcend and Unigen already marked
> > non-removable.
> >
> > "Micha" <mgarbsch@unterderbruecke.de> wrote in message
> > news:e1MYQdlkDHA.3316@tk2msftngp13.phx.gbl...
> > > hmm ok so i have to wait a little bit longer
> > >
> > >
> > > "Heidi Linda eMVP" <hll@bts.co.uk> wrote in message
> > > news:Odr081kkDHA.1740@TK2MSFTNGP12.phx.gbl...
> > > > No. The tool is *only* available from Sandisk, and you need to sign
a
> > > > Non-Disclosure agreement.
> > > > AS I told you in another thread, the gentleman you need to talk to
is
> > Tuan
> > > > Dinh Hoang, tdhoang@sandisk.com
> > > >
> > > > "Micha" <mgarbsch@unterderbruecke.de> wrote in message
> > > > news:uc7UVykkDHA.3316@TK2MSFTNGP11.phx.gbl...
> > > > > Hi Guys
> > > > >
> > > > > I tried to cntact sandink but they didnīt response
> > > > > is their another way to get this tool?
> > > > >
> > > > > i need it very fast!
> > > > >
> > > > > regards
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Reply With Quote
aikwee
Guest
Posts: n/a
 
Re: make Sandink make non-removable
Posted: 10-15-2003, 07:24 AM
please check their website http://www.pretec.com/ to find
your local distributor
>-----Original Message-----
>Do you have an email address or contact number for Pretec?
>
>
>
>"aikwee" <aikwee@spammer.com> wrote in message
>news:OrwiYhmkDHA.372@TK2MSFTNGP11.phx.gbl...
>> i found that pretech (http://www.pretec.com/) can
provide the tools
>> freely.(at least for me) :-) without signing any
agreement....
>>
>> i have tested it . you just need to tell them the model
of the CF and
>> they'll happily email the tool for you.(at least for me)
>>
>> "Heidi Linda eMVP" <hll@bts.co.uk> wrote in message
>> news:euIHIulkDHA.3320@tk2msftngp13.phx.gbl...
>> > Afraid so. Those of us who have the tool aren't
allowed to give it to
>> anyone
>> > else.
>> > However, I have had cards from Transcend and Unigen
already marked
>> > non-removable.
>> >
>> > "Micha" <mgarbsch@unterderbruecke.de> wrote in message
>> > news:e1MYQdlkDHA.3316@tk2msftngp13.phx.gbl...
>> > > hmm ok so i have to wait a little bit longer
>> > >
>> > >
>> > > "Heidi Linda eMVP" <hll@bts.co.uk> wrote in message
>> > > news:Odr081kkDHA.1740@TK2MSFTNGP12.phx.gbl...
>> > > > No. The tool is *only* available from Sandisk,
and you need to sign
>a
>> > > > Non-Disclosure agreement.
>> > > > AS I told you in another thread, the gentleman
you need to talk to
>is
>> > Tuan
>> > > > Dinh Hoang, tdhoang@sandisk.com
>> > > >
>> > > > "Micha" <mgarbsch@unterderbruecke.de> wrote in
message
>> > > > news:uc7UVykkDHA.3316@TK2MSFTNGP11.phx.gbl...
>> > > > > Hi Guys
>> > > > >
>> > > > > I tried to cntact sandink but they didnīt
response
>> > > > > is their another way to get this tool?
>> > > > >
>> > > > > i need it very fast!
>> > > > >
>> > > > > regards
>> > > > >
>> > > > >
>> > > >
>> > > >
>> > >
>> > >
>> >
>> >
>>
>>
>
>
>.
>
Reply With Quote
 
LinkBack Thread Tools Display Modes
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How can I make it go away? Ted Windows XP Configuration & Management 0 07-11-2004 03:20 AM
Need to make a XP Pro SP1 CD! Robert Windows XP Help & Support 3 10-19-2003 05:20 AM
I need some help on how to make a photo cd Yves Alarie Windows XP Photos 1 09-11-2003 02:21 AM
movie make 2 Max Windows XP Video 1 08-04-2003 04:22 PM
can i make a network with danny Windows XP Network & Web 2 07-02-2003 04:39 PM


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90