Network 'Hang' every minute

I've resolved this. I turned on wireless tracing via "netsh wlan set
tracing=on" or better yet-Computer Management->Reliability and
Performance->Data Collector Sets->System->Wireless Diagnostics and saw the
entries listed below in the wlan tace file.
So I turned off the autoconfig for the interface via: netsh wlan set
autoconfig enabled=no interface="Wireless Network Connection"

And no more hangs.



[2552] 20:57:51.888 ACM: Scan for networks. Interface = Linksys Wireless-G
USB Network Adapter #5, scan type = 0x3, flush BSS list = 0.
[2552] 20:57:51.888 INFO: radio should have been turned on. connect state 8
[2552] 20:57:51.888 INFO: set OID 0d01011a, data 0, result 0
[4396] 20:57:54.888 Refresh scan result.
[4396] 20:57:54.888 INFO: query OID 0d010206, data 4294967232, result 0
[4396] 20:57:54.888 INFO: MSM notify 0x8
[2552] 20:57:54.888 ============================= Diag Event
=============================
[2552] 20:57:54.888 --> Fn
[4396] 20:57:54.888 query OID 0d010217, result 0, data size 132
[2552] 20:57:54.888 --> Fn
[4396] 20:57:54.888 1 entries in BSSID list:
[2552] 20:57:54.888 --> Fn
[2552] 20:57:54.888 <-- Fn
[4396] 20:57:54.888 INFO: calling MSMSecPerformCapabilityMatch
[2552] 20:57:54.888 ***** Event[00000000:0000000B]: [ACM: ACM Internal
Notification = 1] --> <0> pIntf=<003FAFB0> *****
[2552] 20:57:54.888 --> Fn
[2552] 20:57:54.888 ===> Notification for guid
1af1a271-85f4-4e6d-9f54-36b91e2d3203
[2552] 20:57:54.888 --> Fn
[2552] 20:57:54.888 <-- Fn
[2552] 20:57:54.888 <-- Fn
[2552] 20:57:54.888 --> Fn
[2552] 20:57:54.888 <-- Fn
[4396] 20:57:54.888 INFO: MSMSecPerformCapabilityMatch returns 0, reason 0
[2552] 20:57:54.888 <-- Fn
[4396] 20:57:54.888 SSID: PUTERWIFI
[2552] 20:57:54.888 ST: current state = Scan, trigger = Scan complete
(Event), next state = Query.
[2552] 20:57:54.888 ============================= Diag Event
=============================
[2552] 20:57:54.888 --> Fn
[2552] 20:57:54.888 --> Fn
[2552] 20:57:54.888 --> Fn
[2552] 20:57:54.888 <-- Fn
[2552] 20:57:54.888 ***** Event[00000000:0000000B]: [ACM: ACM State
Transition = 2] --> <4> pIntf=<003FAFB0> *****
[2552] 20:57:54.888 --> Fn
[2552] 20:57:54.888 --> Fn
[2552] 20:57:54.888 <-- Fn
[2552] 20:57:54.888 <-- Fn
[2552] 20:57:54.888 --> Fn
[2552] 20:57:54.888 <-- Fn
[2552] 20:57:54.888 <-- Fn
[2552] 20:57:54.888 ACM: No auto switch for the current connection.




"JasonK" wrote:

> Hi,
> I'm experiencing a network hang/pause every 60 seconds on my wireless
> network. I can observe this by running ping against my rounter (-t) and once
> every 60 seconds the reply takes between 1000ms to 3000ms. This effect is
> limited to my wirelss adapter, as I've tested the lan card to the same router
> without an issue. Everything else works fine, and this is really only an
> issue during activities that are sensitve to latency. Since I have not been
> able to find a Vista driver for the Linksys, I manually installed the driver
> for XP. Any suggestions or ideas would be greatly appreciated!
>
> Setup:
> Vista Ultimate RTM
> MN-500 Router
> Linksys WUSB54Gv4 adapter