Nforce2 mobo's and Memory.....

Posted: 04-07-2004, 12:54 AM

CafeRacer

Guest
Posts: n/a

How picky are Nforce2 Ultra 400 mobos and the memory sticks you put in them?
I recently got a ECS N2U400-A with a DDR400 capable chipset. I cant get the
board to work with any of the sticks I have. There both cheap pc2100 and
cheap pc2700 sticks. How important is it to have better memory. Are there
comptibility issues with cheap vs. $$$? I thought cheap ram showed up in
intense gaming, not just the ability to just boot the machine to Winows.
Which I can not do due to the numerous stop screens. Any Ideas?
Thanks..................

Nforce2 mobo's and Memory.....

Responses to "Nforce2 mobo's and Memory....."

Richard Urban

Guest
Posts: n/a

Re: Nforce2 mobo's and Memory.....

Posted: 04-07-2004, 01:05 AM

Get better RAM! The best you can afford - plus! If it's name brand, at least
you can return it.

If you use what Crucial recommends in their memory configurator and then
have problems, it will be exchanged "no questions asked"! You DO get what
you pay for.

--
Regards:

Richard Urban

aka Crusty (-: Old B@stard :-)

"CafeRacer" <rrfcafe@volcano.net> wrote in message
news:1076kaq8h1lb344@corp.supernews.com...

> How picky are Nforce2 Ultra 400 mobos and the memory sticks you put in
> them?
> I recently got a ECS N2U400-A with a DDR400 capable chipset. I cant get
> the
> board to work with any of the sticks I have. There both cheap pc2100 and
> cheap pc2700 sticks. How important is it to have better memory. Are there
> comptibility issues with cheap vs. $$$? I thought cheap ram showed up in
> intense gaming, not just the ability to just boot the machine to Winows.
> Which I can not do due to the numerous stop screens. Any Ideas?
> Thanks..................
>
>

peter

Guest
Posts: n/a

Re: Nforce2 mobo's and Memory.....

Posted: 04-07-2004, 04:01 AM

The Nforce2 chipsets are fussy about having the same type in more than one slot.
use all 2100 or all 2700(if thats all you got)
Also try running the ram in sync with whatever you are using for a CPU
peter
"CafeRacer" <rrfcafe@volcano.net> wrote in message
news:1076kaq8h1lb344@corp.supernews.com...

> How picky are Nforce2 Ultra 400 mobos and the memory sticks you put in them?
> I recently got a ECS N2U400-A with a DDR400 capable chipset. I cant get the
> board to work with any of the sticks I have. There both cheap pc2100 and
> cheap pc2700 sticks. How important is it to have better memory. Are there
> comptibility issues with cheap vs. $$$? I thought cheap ram showed up in
> intense gaming, not just the ability to just boot the machine to Winows.
> Which I can not do due to the numerous stop screens. Any Ideas?
> Thanks..................
>
>

S.Heenan

Guest
Posts: n/a

Re: Nforce2 mobo's and Memory.....

Posted: 04-07-2004, 05:56 AM

CafeRacer wrote:

> How picky are Nforce2 Ultra 400 mobos and the memory sticks you put
> in them? I recently got a ECS N2U400-A with a DDR400 capable chipset.
> I cant get the board to work with any of the sticks I have. There
> both cheap pc2100 and cheap pc2700 sticks. How important is it to
> have better memory. Are there comptibility issues with cheap vs. $$$?
> I thought cheap ram showed up in intense gaming, not just the ability
> to just boot the machine to Winows. Which I can not do due to the
> numerous stop screens. Any Ideas? Thanks..................

Generic RAM can often lead to problems, especially in dual channel
configuration, as on the Nforce2 Ultra400 chipset.
Set RAM speed to 133MHz. Disable SPD. Set RAM timings manually.8-3-3-3
should be fine. Set FSB to 133MHz. Use only the single PC2100 module to
start. After it boots correctly a few times, try the PC2700 module.

LinkBack

Thread Tools

Display Modes

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nForce2 Soundproblem	connykonrich	Windows Vista Hardware & Devices	2	11-18-2006 02:51 PM
got 5.1 nforce2 going	Daniel M	Windows Vista Hardware & Devices	6	07-09-2006 01:42 PM
Nforce2 Drivers??	tododo	Windows Vista Install & Setup	6	06-19-2006 06:36 PM
SoundStorn (nForce2) and 5.1	MatthewH12	Windows Vista Hardware & Devices	0	06-11-2006 11:52 PM
Shuttle mobo's and Linux	David Bakody	Linux / Unix	3	07-15-2004 08:54 PM