Norton Internet Security 2007 and Vista Networking

Posted: 02-14-2007, 09:56 PM

Mark S

Guest
Posts: n/a

I have had a heck of a time seeing and accessing my office XP Pro
workstations from my new Vista Dell XPS workstation although I could Ping
them. My question reading the background below is how I can efficiently
configure the Norton Security 2007 without spending hours on determining
which setting to modify.

I have been going through the list of trouble shooting from this newsgroup
and found the root of my problem - Norton Protection Center 2007. I have
been struggling with to find a solution and not been successful.

If I turn all the default settings to off I can see all the computers and
servers on my small office network and my one workstation with Vista
Ultimate will link to them. I can't continue that way without being
connected to the Internet. Which setting should I concentrate my attention?
I didn't see anything on the Norton site to help.

I thought about unistalling Norton and reinstalling but if there is an
easier way I am all ears. Any suggestions are appreciated.

M Simonian
msimonian@aap.net
559 325 6850

Responses to "Norton Internet Security 2007 and Vista Networking"

Robert L [MVP - Networking]

Guest
Posts: n/a

Re: Norton Internet Security 2007 and Vista Networking

Posted: 02-15-2007, 03:28 AM

I don't use Norton Security myself. However, some of my clients had similar cases. You may just add local subnet to the Norton security. Then the other computers should see all local computers. These cases may help,

Cannot access remote computers via VPNThe VPN client is running Norton Internet security. We are able to access the network resources after disable Norton Internet Security. ...
http://www.chicagotech.net/vpnissues/vpn&NIS1.htm

Can't join domain because of Norton SecurityBy turning off the Firewall in Norton Internet Security using the wxp sp2 ... A: You may need to add the subnet to the Norton Security. Q2: That worked. ...
http://www.chicagotech.net/Security/nortonsecurity1.htm

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Mark S" <mms88@pacbell.net> wrote in message news:%23mZVWPJUHHA.4276@TK2MSFTNGP02.phx.gbl...
I have had a heck of a time seeing and accessing my office XP Pro
workstations from my new Vista Dell XPS workstation although I could Ping
them. My question reading the background below is how I can efficiently
configure the Norton Security 2007 without spending hours on determining
which setting to modify.

I have been going through the list of trouble shooting from this newsgroup
and found the root of my problem - Norton Protection Center 2007. I have
been struggling with to find a solution and not been successful.

If I turn all the default settings to off I can see all the computers and
servers on my small office network and my one workstation with Vista
Ultimate will link to them. I can't continue that way without being
connected to the Internet. Which setting should I concentrate my attention?
I didn't see anything on the Norton site to help.

I thought about unistalling Norton and reinstalling but if there is an
easier way I am all ears. Any suggestions are appreciated.

M Simonian
msimonian@aap.net
559 325 6850

Mark S

Guest
Posts: n/a

Re: Norton Internet Security 2007 and Vista Networking

Posted: 02-15-2007, 10:50 PM

Robert, It turns out that disabling the firewall will open the connections and access all the computers on the network. I usually only need to do that for a few minutes to find and transfer files and that will be my work around. I didn't see the documentation to submit the subnet in a rule in Norton. I will keep looking. Thanks for the suggestions

Mark Simonian msimonian@aap.net
"Robert L [MVP - Networking]" <noreply@hotmail.com> wrote in message news:uI3jjFLUHHA.4784@TK2MSFTNGP03.phx.gbl...
I don't use Norton Security myself. However, some of my clients had similar cases. You may just add local subnet to the Norton security. Then the other computers should see all local computers. These cases may help,

Cannot access remote computers via VPN The VPN client is running Norton Internet security. We are able to access the network resources after disable Norton Internet Security. ...
http://www.chicagotech.net/vpnissues/vpn&NIS1.htm

Can't join domain because of Norton Security By turning off the Firewall in Norton Internet Security using the wxp sp2 ... A: You may need to add the subnet to the Norton Security. Q2: That worked. ...
http://www.chicagotech.net/Security/nortonsecurity1.htm

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Mark S" <mms88@pacbell.net> wrote in message news:%23mZVWPJUHHA.4276@TK2MSFTNGP02.phx.gbl...
I have had a heck of a time seeing and accessing my office XP Pro
workstations from my new Vista Dell XPS workstation although I could Ping
them. My question reading the background below is how I can efficiently
configure the Norton Security 2007 without spending hours on determining
which setting to modify.

I have been going through the list of trouble shooting from this newsgroup
and found the root of my problem - Norton Protection Center 2007. I have
been struggling with to find a solution and not been successful.

If I turn all the default settings to off I can see all the computers and
servers on my small office network and my one workstation with Vista
Ultimate will link to them. I can't continue that way without being
connected to the Internet. Which setting should I concentrate my attention?
I didn't see anything on the Norton site to help.

I thought about unistalling Norton and reinstalling but if there is an
easier way I am all ears. Any suggestions are appreciated.

M Simonian
msimonian@aap.net
559 325 6850

Robert L [MVP - Networking]

Guest
Posts: n/a

Re: Norton Internet Security 2007 and Vista Networking

Posted: 02-16-2007, 05:06 AM

Thank you for the feedback.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Mark S" <mms88@pacbell.net> wrote in message news:%23e2KOSWUHHA.2212@TK2MSFTNGP02.phx.gbl...
Robert, It turns out that disabling the firewall will open the connections and access all the computers on the network. I usually only need to do that for a few minutes to find and transfer files and that will be my work around. I didn't see the documentation to submit the subnet in a rule in Norton. I will keep looking. Thanks for the suggestions

Mark Simonian msimonian@aap.net
"Robert L [MVP - Networking]" <noreply@hotmail.com> wrote in message news:uI3jjFLUHHA.4784@TK2MSFTNGP03.phx.gbl...
I don't use Norton Security myself. However, some of my clients had similar cases. You may just add local subnet to the Norton security. Then the other computers should see all local computers. These cases may help,

Cannot access remote computers via VPN The VPN client is running Norton Internet security. We are able to access the network resources after disable Norton Internet Security. ...
http://www.chicagotech.net/vpnissues/vpn&NIS1.htm

Can't join domain because of Norton Security By turning off the Firewall in Norton Internet Security using the wxp sp2 ... A: You may need to add the subnet to the Norton Security. Q2: That worked. ...
http://www.chicagotech.net/Security/nortonsecurity1.htm

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Mark S" <mms88@pacbell.net> wrote in message news:%23mZVWPJUHHA.4276@TK2MSFTNGP02.phx.gbl...
I have had a heck of a time seeing and accessing my office XP Pro
workstations from my new Vista Dell XPS workstation although I could Ping
them. My question reading the background below is how I can efficiently
configure the Norton Security 2007 without spending hours on determining
which setting to modify.

I have been going through the list of trouble shooting from this newsgroup
and found the root of my problem - Norton Protection Center 2007. I have
been struggling with to find a solution and not been successful.

If I turn all the default settings to off I can see all the computers and
servers on my small office network and my one workstation with Vista
Ultimate will link to them. I can't continue that way without being
connected to the Internet. Which setting should I concentrate my attention?
I didn't see anything on the Norton site to help.

I thought about unistalling Norton and reinstalling but if there is an
easier way I am all ears. Any suggestions are appreciated.

M Simonian
msimonian@aap.net
559 325 6850

LinkBack

Thread Tools

Display Modes

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Norton security & antivirus	John Rust	Windows Vista Install & Setup	2	07-17-2006 11:01 AM
PC-cillinâ„¢ Internet Security 14.55 for Windows Vista	Mikejfs	Windows Vista Security	4	07-08-2006 01:08 AM
PC-cillin Internet Security 14.55 Beta for Windows Vista	foxbat1126	Windows Vista Security	3	06-20-2006 05:22 AM
Norton AV and Security	John Rust	Windows Vista Install & Setup	3	06-09-2006 11:15 PM
Office 2007 documents security question	Howard	Windows Vista Security	6	04-10-2006 02:49 AM