Not copying Windows files on install

I am using a SATA hard drive. How do I get my drive controller drivers for my
hard drive? It is the only part of my computer which is not new and I have no
cd's or disks for it. It is a Maxtor Hard Drive if that helps.

"Malke" wrote:

> Rich wrote:

> > I just bought a retail copy of vista and am attempting to install it on a new
> > computer. The Hard drive is blank and formatted. I get as far as "Installing
> > Windows..." and get the message "That's all the information we need right
> > now. Your computer will restart several times during installation." Then
> > highlighted is the "copying windows files (0%)" box however I cant get past
> > this point. I see three dots (...) appearing and disappearing after the
> > message but the % does not increase. Any help at all?

>
> Failure to install an operating system normally means a hardware
> problem. The fact that your computer is new is irrelevant. Since we
> don't have any of your computer specs, I can't be more specific. Are you
> sure your hardware supports Vista? Are you installing Vista with no
> peripherals attached? Is the hard drive SATA and did you provide the
> drive controller drivers at the beginning of the installation? How long
> did you wait before giving up?
>
> General hardware testing:
> http://www.elephantboycomputers.com/...ardware_Tshoot
>
>
> Malke
> --
> Elephant Boy Computers
> www.elephantboycomputers.com
> "Don't Panic!"
> MS-MVP Windows - Shell/User
>

Is it drivers for my hard drive I need or drivers for my motherboard? I have
a P965T-A motherboard which on the ECS site is supposed to be vista ready.

"Rich" wrote:

> I am using a SATA hard drive. How do I get my drive controller drivers for my
> hard drive? It is the only part of my computer which is not new and I have no
> cd's or disks for it. It is a Maxtor Hard Drive if that helps.
>
> "Malke" wrote:
>

> > Rich wrote:

> > > I just bought a retail copy of vista and am attempting to install it on a new
> > > computer. The Hard drive is blank and formatted. I get as far as "Installing
> > > Windows..." and get the message "That's all the information we need right
> > > now. Your computer will restart several times during installation." Then
> > > highlighted is the "copying windows files (0%)" box however I cant get past
> > > this point. I see three dots (...) appearing and disappearing after the
> > > message but the % does not increase. Any help at all?

> >
> > Failure to install an operating system normally means a hardware
> > problem. The fact that your computer is new is irrelevant. Since we
> > don't have any of your computer specs, I can't be more specific. Are you
> > sure your hardware supports Vista? Are you installing Vista with no
> > peripherals attached? Is the hard drive SATA and did you provide the
> > drive controller drivers at the beginning of the installation? How long
> > did you wait before giving up?
> >
> > General hardware testing:
> > http://www.elephantboycomputers.com/...ardware_Tshoot
> >
> >
> > Malke
> > --
> > Elephant Boy Computers
> > www.elephantboycomputers.com
> > "Don't Panic!"
> > MS-MVP Windows - Shell/User
> >

"Rich" <Rich@discussions.microsoft.com> wrote in message
news:1F9A8E2E-3DAA-4E95-8530-C00D3F768454@microsoft.com...

> "Rich" wrote:
>

>> I am using a SATA hard drive. How do I get my drive controller drivers
>> for my
>> hard drive? It is the only part of my computer which is not new and I
>> have no
>> cd's or disks for it. It is a Maxtor Hard Drive if that helps.

>
> Is it drivers for my hard drive I need or drivers for my motherboard? I
> have
> a P965T-A motherboard which on the ECS site is supposed to be vista ready.

You need the drivers for the hard drive interface which is part of your
motherboard.

Rich <Rich@discussions.microsoft.com> wrote:

> Is it drivers for my hard drive I need or drivers for my
> motherboard? I have a P965T-A motherboard which on the ECS site is
> supposed to be vista ready.

You need the SATA drivers provided by your motherboard manufacturer
on the CD that came with the system or that you download from the
ECS site because neither XP or Vista can install SATA drivers unless
you provide the OS with the drivers and tell it their location.

You must copy the drivers to a floppy or a CD and during the install
of Vista you'll be asked early on if you need to install these drivers,
select yes. Later during the install, you'll be asked for the drivers,
insert the CD (you can remove the Vista CD until you're asked for it
later) or floppy and point to the location and everything should work
from there.

Here's the ECS site, you need the Raid Controller Driver:

http://www.ecs.com.tw/ECSWebSite/Dow...nuID=6&LanID=9

Or: http://preview.tinyurl.com/3d7c52


--
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project: http://blinkynet.net/comp/uip5.html

OK I'll give these drivers a go then. Should I need to do this before I start
installing anything though? Do you mean I need to do this on the load driver
option before I click to begin the installation?

"XS11E" wrote:

> Rich <Rich@discussions.microsoft.com> wrote:
>

> > Is it drivers for my hard drive I need or drivers for my
> > motherboard? I have a P965T-A motherboard which on the ECS site is
> > supposed to be vista ready.

>
> You need the SATA drivers provided by your motherboard manufacturer
> on the CD that came with the system or that you download from the
> ECS site because neither XP or Vista can install SATA drivers unless
> you provide the OS with the drivers and tell it their location.
>
> You must copy the drivers to a floppy or a CD and during the install
> of Vista you'll be asked early on if you need to install these drivers,
> select yes. Later during the install, you'll be asked for the drivers,
> insert the CD (you can remove the Vista CD until you're asked for it
> later) or floppy and point to the location and everything should work
> from there.
>
> Here's the ECS site, you need the Raid Controller Driver:
>
> http://www.ecs.com.tw/ECSWebSite/Dow...nuID=6&LanID=9
>
> Or: http://preview.tinyurl.com/3d7c52
>
>
> --
> XS11E, Killing all posts from Google Groups
> The Usenet Improvement Project: http://blinkynet.net/comp/uip5.html
>