|
|
>I have a Nvidia GeForce 6100 running on Vista Home Premium, Vista is
>running great EXCEPT my screen flickers now. I download the updated drivers
>from Nvidia, didn't help, went to the Vista website found a help file for
>screen flickering, says to change the refresh rate, ok, I did that. BUT my
>screen still flickers! Microsoft on their help chat line says I need more
>ram. Besides upgrading my video card does anyone here have any idea what I
>can do to fix this??
>
> Thanks in advance for your help!
> Denise
Nividia DOES see the correct moniter, it's>I have a Nvidia GeForce 6100 running on Vista Home Premium, Vista is
>running great EXCEPT my screen flickers now. I download the updated drivers
>from Nvidia, didn't help, went to the Vista website found a help file for
>screen flickering, says to change the refresh rate, ok, I did that. BUT my
>screen still flickers! Microsoft on their help chat line says I need more
>ram. Besides upgrading my video card does anyone here have any idea what I
>can do to fix this??
>
> Thanks in advance for your help!
> Denise
> OK, Display settings for GeForce 6100 say:
>
> Total Available graphics memory 399 MB
> Dedicated Video Memory 128 MB
>
> System is:
> AMD Athlon 64 X2 dual-core processor 4200
> 2.2 GB
> 2000 MHz front side bus
> L2 cache: 512 KB x2
> 2048 MB 400 MHz (PC3200) DDR memory (four 512 MB modules)
> Vista isn't seeing my Gateway Moniter which is a FPD1960, it is using a
> Generic driver there (Gateway doesn't have a vista driver ready, says it's
> not the moniter it's vista
> just vista that doesn't.
>
> Resolution is set at 1152 by 864 (32 bit) which is where the geforce
> drivers set it when they installed, I've changed it up and down, no
> difference.
>
> Microsofts solution is:
> Based on the information shared by us on the chat, you need to Upgrade
> your RAM to 512 MB RAM
>
> If I have too I will, but I don't want to spend the money if it's not
> needed.
>
> --
> Denise
>
> "JW" <nospam@no.spam> wrote in message
> news:edAFdDGTHHA.1552@TK2MSFTNGP05.phx.gbl...
> How much memory does your 6100 card have?
> How much main memory does your system have?
> What resolution are you using over what display interface to your monitor?
>
> "Denise" <dendro@bellsouth.net> wrote in message
> news:e4MVmtFTHHA.1200@TK2MSFTNGP02.phx.gbl...>>I have a Nvidia GeForce 6100 running on Vista Home Premium, Vista is>
>>running great EXCEPT my screen flickers now. I download the updated
>>drivers from Nvidia, didn't help, went to the Vista website found a help
>>file for screen flickering, says to change the refresh rate, ok, I did
>>that. BUT my screen still flickers! Microsoft on their help chat line says
>>I need more ram. Besides upgrading my video card does anyone here have any
>>idea what I can do to fix this??
>>
>> Thanks in advance for your help!
>> Denise
> OK, Display settings for GeForce 6100 say:
>
> Total Available graphics memory 399 MB
> Dedicated Video Memory 128 MB
>
> System is:
> AMD Athlon 64 X2 dual-core processor 4200
> 2.2 GB
> 2000 MHz front side bus
> L2 cache: 512 KB x2
> 2048 MB 400 MHz (PC3200) DDR memory (four 512 MB modules)
> Vista isn't seeing my Gateway Moniter which is a FPD1960, it is using a
> Generic driver there (Gateway doesn't have a vista driver ready, says it's
> not the moniter it's vista
> just vista that doesn't.
>
> Resolution is set at 1152 by 864 (32 bit) which is where the geforce
> drivers set it when they installed, I've changed it up and down, no
> difference.
>
> Microsofts solution is:
> Based on the information shared by us on the chat, you need to Upgrade
> your RAM to 512 MB RAM
>
> If I have too I will, but I don't want to spend the money if it's not
> needed.
>
> --
> Denise
>
> "JW" <nospam@no.spam> wrote in message
> news:edAFdDGTHHA.1552@TK2MSFTNGP05.phx.gbl...
> How much memory does your 6100 card have?
> How much main memory does your system have?
> What resolution are you using over what display interface to your monitor?
>
> "Denise" <dendro@bellsouth.net> wrote in message
> news:e4MVmtFTHHA.1200@TK2MSFTNGP02.phx.gbl...>>I have a Nvidia GeForce 6100 running on Vista Home Premium, Vista is>
>>running great EXCEPT my screen flickers now. I download the updated
>>drivers from Nvidia, didn't help, went to the Vista website found a help
>>file for screen flickering, says to change the refresh rate, ok, I did
>>that. BUT my screen still flickers! Microsoft on their help chat line says
>>I need more ram. Besides upgrading my video card does anyone here have any
>>idea what I can do to fix this??
>>
>> Thanks in advance for your help!
>> Denise
> Yes: Are you
> using the a standard PC VGA interface to your monitor?
> Done, no difference on any setting! Try setting the resolution
> to 1024x768@60Hz
> 32 bit version of Vista Are you running the
> 32bit or the 64 bit version of Vista?
>
> Do you have latest NVIDIA 32 bit or 64 VISTA drivers (release 100.59) from
> the NVIDIA Web site installed?
>
> Yes downloaded the other day, redownloaded again today and reinstalled to
> make sure nothing changed!
>
> Thank you for all of your help!
> Denise
>
> "JW" <nospam@no.spam> wrote in message
> news:%23R%23zT6GTHHA.3948@TK2MSFTNGP05.phx.gbl...
> Are you using the a standard PC VGA interface to your monitor?
> Try setting the resolution to 1024x768@60Hz
> Are you running the 32bit or the 64 bit version of Vista?
> Do you have latest NVIDIA 32 bit or 64 VISTA drivers (release 100.59) from
> the NVIDIA Web site installed?
>
> "Denise" <dendro@bellsouth.net> wrote in message
> news:%2380qsdGTHHA.4076@TK2MSFTNGP05.phx.gbl...>> OK, Display settings for GeForce 6100 say:
>>
>> Total Available graphics memory 399 MB
>> Dedicated Video Memory 128 MB
>>
>> System is:
>> AMD Athlon 64 X2 dual-core processor 4200
>> 2.2 GB
>> 2000 MHz front side bus
>> L2 cache: 512 KB x2
>> 2048 MB 400 MHz (PC3200) DDR memory (four 512 MB modules)
>> Vista isn't seeing my Gateway Moniter which is a FPD1960, it is using a
>> Generic driver there (Gateway doesn't have a vista driver ready, says
>> it's not the moniter it's vista
>> it's just vista that doesn't.
>>
>> Resolution is set at 1152 by 864 (32 bit) which is where the geforce
>> drivers set it when they installed, I've changed it up and down, no
>> difference.
>>
>> Microsofts solution is:
>> Based on the information shared by us on the chat, you need to Upgrade
>> your RAM to 512 MB RAM
>>
>> If I have too I will, but I don't want to spend the money if it's not
>> needed.
>>
>> --
>> Denise
>>
>> "JW" <nospam@no.spam> wrote in message
>> news:edAFdDGTHHA.1552@TK2MSFTNGP05.phx.gbl...
>> How much memory does your 6100 card have?
>> How much main memory does your system have?
>> What resolution are you using over what display interface to your
>> monitor?
>>
>> "Denise" <dendro@bellsouth.net> wrote in message
>> news:e4MVmtFTHHA.1200@TK2MSFTNGP02.phx.gbl...>>>I have a Nvidia GeForce 6100 running on Vista Home Premium, Vista is>>
>>>running great EXCEPT my screen flickers now. I download the updated
>>>drivers from Nvidia, didn't help, went to the Vista website found a help
>>>file for screen flickering, says to change the refresh rate, ok, I did
>>>that. BUT my screen still flickers! Microsoft on their help chat line
>>>says I need more ram. Besides upgrading my video card does anyone here
>>>have any idea what I can do to fix this??
>>>
>>> Thanks in advance for your help!
>>> Denise
> OK, Display settings for GeForce 6100 say:
>
> Total Available graphics memory 399 MB
> Dedicated Video Memory 128 MB
>
> System is:
> AMD Athlon 64 X2 dual-core processor 4200
> 2.2 GB
> 2000 MHz front side bus
> L2 cache: 512 KB x2
> 2048 MB 400 MHz (PC3200) DDR memory (four 512 MB modules)
> Vista isn't seeing my Gateway Moniter which is a FPD1960, it is using a
> Generic driver there (Gateway doesn't have a vista driver ready, says it's
> not the moniter it's vista
> just vista that doesn't.
>
> Resolution is set at 1152 by 864 (32 bit) which is where the geforce
> drivers set it when they installed, I've changed it up and down, no
> difference.
>
> Microsofts solution is:
> Based on the information shared by us on the chat, you need to Upgrade
> your RAM to 512 MB RAM
>
> If I have too I will, but I don't want to spend the money if it's not
> needed.
>
> --
> Denise
>
> "JW" <nospam@no.spam> wrote in message
> news:edAFdDGTHHA.1552@TK2MSFTNGP05.phx.gbl...
> How much memory does your 6100 card have?
> How much main memory does your system have?
> What resolution are you using over what display interface to your monitor?
>
> "Denise" <dendro@bellsouth.net> wrote in message
> news:e4MVmtFTHHA.1200@TK2MSFTNGP02.phx.gbl...>>I have a Nvidia GeForce 6100 running on Vista Home Premium, Vista is>
>>running great EXCEPT my screen flickers now. I download the updated
>>drivers from Nvidia, didn't help, went to the Vista website found a help
>>file for screen flickering, says to change the refresh rate, ok, I did
>>that. BUT my screen still flickers! Microsoft on their help chat line says
>>I need more ram. Besides upgrading my video card does anyone here have any
>>idea what I can do to fix this??
>>
>> Thanks in advance for your help!
>> Denise
> OK, Display settings for GeForce 6100 say:
>
> Total Available graphics memory 399 MB
> Dedicated Video Memory 128 MB
>
> System is:
> AMD Athlon 64 X2 dual-core processor 4200
> 2.2 GB
> 2000 MHz front side bus
> L2 cache: 512 KB x2
> 2048 MB 400 MHz (PC3200) DDR memory (four 512 MB modules)
> Vista isn't seeing my Gateway Moniter which is a FPD1960, it is using a
> Generic driver there (Gateway doesn't have a vista driver ready, says it's
> not the moniter it's vista
> just vista that doesn't.
>
> Resolution is set at 1152 by 864 (32 bit) which is where the geforce
> drivers set it when they installed, I've changed it up and down, no
> difference.
>
> Microsofts solution is:
> Based on the information shared by us on the chat, you need to Upgrade
> your RAM to 512 MB RAM
>
> If I have too I will, but I don't want to spend the money if it's not
> needed.
>
> --
> Denise
>
> "JW" <nospam@no.spam> wrote in message
> news:edAFdDGTHHA.1552@TK2MSFTNGP05.phx.gbl...
> How much memory does your 6100 card have?
> How much main memory does your system have?
> What resolution are you using over what display interface to your monitor?
>
> "Denise" <dendro@bellsouth.net> wrote in message
> news:e4MVmtFTHHA.1200@TK2MSFTNGP02.phx.gbl...>>I have a Nvidia GeForce 6100 running on Vista Home Premium, Vista is>
>>running great EXCEPT my screen flickers now. I download the updated
>>drivers from Nvidia, didn't help, went to the Vista website found a help
>>file for screen flickering, says to change the refresh rate, ok, I did
>>that. BUT my screen still flickers! Microsoft on their help chat line says
>>I need more ram. Besides upgrading my video card does anyone here have any
>>idea what I can do to fix this??
>>
>> Thanks in advance for your help!
>> Denise
|
|
LinkBack | Thread Tools | Display Modes |
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| nVidia Geforce 6800 fan doesn't go off | Stefan Eesmann | Windows Vista Hardware & Devices | 6 | 05-16-2007 12:43 PM |
| nVIDIA GeForce Go 6100 | ED SCHWEBEL | Windows Vista Hardware & Devices | 9 | 04-27-2007 12:24 PM |
| GeForce 6100 (GPU) | Andrey I. Krasvitnikov | Windows Vista Hardware & Devices | 2 | 09-18-2006 07:39 PM |
| NVIDIA GeForce 4 MX 420 Gone | James | Windows Vista Hardware & Devices | 4 | 07-20-2006 08:54 PM |
| replacing nVidia TNT2 with nVidia Geforce 4 graphics card | Scott Ruckman | Windows XP Video | 0 | 07-24-2003 05:22 PM |
Hybrid Mode
Posts: n/a