peer name resolution protocol service

> Martin,
>
> Under services, check that the Peer Name Resolution Service is started.
>
> Next, run the netsh command, switch to the p2p, pnrp, cloud context. Enter
> the Start command and confirm it says Ok.
>
> Next, switch to the interface, ipv6 context. Enter the command Show Teredo.
> The Type should be client and the NAT should be cone.
>
> Check out the following article for additional help and resources at the
> bottom.
>
> Hope this helps
> Ad.
>
> "Martin" <Martin@discussions.microsoft.com> wrote in message
> news:72C8FE0B-B571-4D47-86B9-73A364966F21@microsoft.com...

> > taI can't get meeting space to start. I get an error: "Meeting space
> > cannot
> > start because a peer-to-peer services failed". When I trace down the
> > actual
> > service that fails to sart, it's the "peer name resolution protocol
> > service".
> > It refuses to start, and gives the error code 0x80630203. When I trace
> > that
> > error code, I get:
> >
> > "One or more of the dependent services could not initialize. The modules
> > pnrpsvc, p2psvc, p2pimsvc, and p2phost must be present. If not present,
> > these
> > modules can be manually initialized."
> >
> > I'm stuck... I'm trying to get meeting space to work, but I can't get peer
> > services to start and the errors aren't helpful in finding the source of
> > the
> > problem.
> >
> > Any ideas?
> > Thanks

>
>
>

> taI can't get meeting space to start. I get an error: "Meeting space
> cannot
> start because a peer-to-peer services failed". When I trace down the
> actual
> service that fails to sart, it's the "peer name resolution protocol
> service".
> It refuses to start, and gives the error code 0x80630203. When I trace
> that
> error code, I get:
>
> "One or more of the dependent services could not initialize. The modules
> pnrpsvc, p2psvc, p2pimsvc, and p2phost must be present. If not present,
> these
> modules can be manually initialized."
>
> I'm stuck... I'm trying to get meeting space to work, but I can't get peer
> services to start and the errors aren't helpful in finding the source of
> the
> problem.
>
> Any ideas?
> Thanks

> Hi Martin,
> Please check the access right of the following directory. You should have
> the write access to the following directory.
> %USERPROFILE%\AppData\Roaming\Microsoft\
>
> Which Vista build are you using? Is it an upgrade from XP or a fresh
> installation of Vista?
> Thanks,
> Pritam
>
>
> --
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
>
>
> "Martin" <Martin@discussions.microsoft.com> wrote in message
> news:72C8FE0B-B571-4D47-86B9-73A364966F21@microsoft.com...

> > taI can't get meeting space to start. I get an error: "Meeting space
> > cannot
> > start because a peer-to-peer services failed". When I trace down the
> > actual
> > service that fails to sart, it's the "peer name resolution protocol
> > service".
> > It refuses to start, and gives the error code 0x80630203. When I trace
> > that
> > error code, I get:
> >
> > "One or more of the dependent services could not initialize. The modules
> > pnrpsvc, p2psvc, p2pimsvc, and p2phost must be present. If not present,
> > these
> > modules can be manually initialized."
> >
> > I'm stuck... I'm trying to get meeting space to work, but I can't get peer
> > services to start and the errors aren't helpful in finding the source of
> > the
> > problem.
> >
> > Any ideas?
> > Thanks

>
>
>