Print Spooler Problem, Error 1075

Posted: 12-06-2006, 08:55 AM

Delores

Guest
Posts: n/a

"The dependency service does not exist or has been marked for deletion."
I have completed the regedit instructions given Michael's post of 12-02-06.
I followed the instructions to the letter. There was also a Lexmark driver
under ComSet3, so I deleted that lexmark subfile also, as follows:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Print
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Pr int
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Control\Pr int
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Pr int\Environments\Windows
NT x86\Drivers\Version-3
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Print\Environments\Windows NT x86\Drivers\Version-3
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Print\Monitors
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Pr int\Monitors

From here, I went back to Services, and the Print Spooler, set to automatic,
and tried to start the print spooler. It gave me this error message
above^(1075).
I also, first downloaded and opened/installed rktools, as Bruce Sanderson
suggested in the link that Cari provided in her response. I have very little
technical knowledge, so I opened the rktools, and found cleanspl.exe, and ran
it, only to receive another error/Access is denied. Under computer name, I
typed the computer with the name it's know by, my name mispelled, Dolores,
but at second glance under browse it only has My network places although my
computer in used at home only and isn't on a network/my name nor my computer
were listed here to select. I have saved printscreens of all these error
messages and I don't know what the problem is, what caused it, how to fix it,
nor where to look for assistance. Can anyone help me from this point! Can
Lexmark Support help me in any way?

Responses to "Print Spooler Problem, Error 1075"

Tom Ferguson

Guest
Posts: n/a

Re: Print Spooler Problem, Error 1075

Posted: 12-06-2006, 01:43 PM

Is the RPC service running?
Tom
MSMVP
Windows Shell User

"Delores" <Delores@discussions.microsoft.com> wrote in message
news:9556BCD1-0DC9-4ACC-A893-BDAAB9CFB0DE@microsoft.com...

> "The dependency service does not exist or has been marked for
> deletion."
> I have completed the regedit instructions given Michael's post of
> 12-02-06.
> I followed the instructions to the letter. There was also a Lexmark
> driver
> under ComSet3, so I deleted that lexmark subfile also, as follows:
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Print
> HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Pr int
> HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Control\Pr int
> HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Pr int\Environments\Windows
> NT x86\Drivers\Version-3
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Print\Environments\Windows
> NT x86\Drivers\Version-3
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Print\Monitors
> HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Pr int\Monitors
>
> From here, I went back to Services, and the Print Spooler, set to
> automatic,
> and tried to start the print spooler. It gave me this error message
> above^(1075).
> I also, first downloaded and opened/installed rktools, as Bruce
> Sanderson
> suggested in the link that Cari provided in her response. I have very
> little
> technical knowledge, so I opened the rktools, and found cleanspl.exe,
> and ran
> it, only to receive another error/Access is denied. Under computer
> name, I
> typed the computer with the name it's know by, my name mispelled,
> Dolores,
> but at second glance under browse it only has My network places
> although my
> computer in used at home only and isn't on a network/my name nor my
> computer
> were listed here to select. I have saved printscreens of all these
> error
> messages and I don't know what the problem is, what caused it, how to
> fix it,
> nor where to look for assistance. Can anyone help me from this point!
> Can
> Lexmark Support help me in any way?
>
>
>

Delores

Guest
Posts: n/a

RE: Print Spooler Problem, Error 1075

Posted: 12-10-2006, 05:00 AM

After calling Lexmark, I resolved my problem when they told me it was a
system error, so I thought that I could repair XP software with the second
repair option with the CD, and it worked for me. The print spooler service as
started afterwards, when I looked, where it wouldn't start previously.

"Delores" wrote:

> "The dependency service does not exist or has been marked for deletion."
> I have completed the regedit instructions given Michael's post of 12-02-06.
> I followed the instructions to the letter. There was also a Lexmark driver
> under ComSet3, so I deleted that lexmark subfile also, as follows:
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Print
> HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Pr int
> HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Control\Pr int
> HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Pr int\Environments\Windows
> NT x86\Drivers\Version-3
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Print\Environments\Windows NT x86\Drivers\Version-3
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Print\Monitors
> HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Pr int\Monitors
>
> From here, I went back to Services, and the Print Spooler, set to automatic,
> and tried to start the print spooler. It gave me this error message
> above^(1075).
> I also, first downloaded and opened/installed rktools, as Bruce Sanderson
> suggested in the link that Cari provided in her response. I have very little
> technical knowledge, so I opened the rktools, and found cleanspl.exe, and ran
> it, only to receive another error/Access is denied. Under computer name, I
> typed the computer with the name it's know by, my name mispelled, Dolores,
> but at second glance under browse it only has My network places although my
> computer in used at home only and isn't on a network/my name nor my computer
> were listed here to select. I have saved printscreens of all these error
> messages and I don't know what the problem is, what caused it, how to fix it,
> nor where to look for assistance. Can anyone help me from this point! Can
> Lexmark Support help me in any way?
>
>
>

Delores

Guest
Posts: n/a

RE: Print Spooler Problem, Error 1075

Posted: 12-10-2006, 05:04 AM

I would like to say thank all of you for these postings and everyones help
and possible solutions. I helped me continue to search for resolutions and I
couldn't have done it without everyone's knowledge, again Thank You all.

"Delores" wrote:

> "The dependency service does not exist or has been marked for deletion."
> I have completed the regedit instructions given Michael's post of 12-02-06.
> I followed the instructions to the letter. There was also a Lexmark driver
> under ComSet3, so I deleted that lexmark subfile also, as follows:
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Print
> HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Pr int
> HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Control\Pr int
> HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Pr int\Environments\Windows
> NT x86\Drivers\Version-3
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Print\Environments\Windows NT x86\Drivers\Version-3
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Print\Monitors
> HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Pr int\Monitors
>
> From here, I went back to Services, and the Print Spooler, set to automatic,
> and tried to start the print spooler. It gave me this error message
> above^(1075).
> I also, first downloaded and opened/installed rktools, as Bruce Sanderson
> suggested in the link that Cari provided in her response. I have very little
> technical knowledge, so I opened the rktools, and found cleanspl.exe, and ran
> it, only to receive another error/Access is denied. Under computer name, I
> typed the computer with the name it's know by, my name mispelled, Dolores,
> but at second glance under browse it only has My network places although my
> computer in used at home only and isn't on a network/my name nor my computer
> were listed here to select. I have saved printscreens of all these error
> messages and I don't know what the problem is, what caused it, how to fix it,
> nor where to look for assistance. Can anyone help me from this point! Can
> Lexmark Support help me in any way?
>
>
>

RPayes

Guest
Posts: n/a

RE: Print Spooler Problem, Error 1075

Posted: 12-10-2006, 11:05 PM

"Delores" wrote:

> I would like to say thank all of you for these postings and everyones help
> and possible solutions. I helped me continue to search for resolutions and I
> couldn't have done it without everyone's knowledge, again Thank You all.
>
> "Delores" wrote:
>
> > "The dependency service does not exist or has been marked for deletion."
> > I have completed the regedit instructions given Michael's post of 12-02-06.
> > I followed the instructions to the letter. There was also a Lexmark driver
> > under ComSet3, so I deleted that lexmark subfile also, as follows:
> > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Print
> > HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Pr int
> > HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Control\Pr int
> > HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Pr int\Environments\Windows
> > NT x86\Drivers\Version-3
> > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Print\Environments\Windows NT x86\Drivers\Version-3
> > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Print\Monitors
> > HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Pr int\Monitors
> >
> > From here, I went back to Services, and the Print Spooler, set to automatic,
> > and tried to start the print spooler. It gave me this error message
> > above^(1075).
> > I also, first downloaded and opened/installed rktools, as Bruce Sanderson
> > suggested in the link that Cari provided in her response. I have very little
> > technical knowledge, so I opened the rktools, and found cleanspl.exe, and ran
> > it, only to receive another error/Access is denied. Under computer name, I
> > typed the computer with the name it's know by, my name mispelled, Dolores,
> > but at second glance under browse it only has My network places although my
> > computer in used at home only and isn't on a network/my name nor my computer
> > were listed here to select. I have saved printscreens of all these error
> > messages and I don't know what the problem is, what caused it, how to fix it,
> > nor where to look for assistance. Can anyone help me from this point! Can
> > Lexmark Support help me in any way?
> >
> >
> >

LinkBack

Thread Tools

Display Modes

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Print Spooler Error	ryaneco	Windows Vista Printers & Scanners	3	11-04-2008 01:23 AM
Problem installing Lexmark x4650 - error 0x000006be, Print Spooler, Add Printer	AndyW68	Windows Vista Printers & Scanners	7	10-20-2008 04:55 PM
error 1075 printer spooler is not running	njnitehawk	Windows Vista Printers & Scanners	3	08-07-2008 02:01 PM
Print spooler problem, error 1058	Michael	Windows XP Printers / Scanners / Fax	15	01-03-2007 06:54 PM
Print spooler error	Betina	Windows XP Printers / Scanners / Fax	10	12-29-2006 04:23 AM