Printer Port Logical Interface device

I have a printer (Canon BJC-2010) directly connected to
parallel port (and have since April 2003. Had just
recently upgraded the BIOS, ATI Radeon 9000 video card
and modem and Roxio Easy CD Creator 5.

>-----Original Message-----
>How about if you tell us what is connected to your

computer instead of us

>trying to guess.
>
>--
>
>
>The best live web video on the internet

http://www.seedsv.com/webdemo.htm

>Sharpvision simply the best http://www.seedsv.com
>
>
>
>"torey" <anonymous@discussions.microsoft.com> wrote in

message

>news:005501c3ca55$730f9da0$a601280a@phx.gbl...

>> When trying to use "stand by" or "hibernate" modes, I

get

>> the message that "printer port logical interface"

device

>> is being used by another application. Does anyone have
>> an idea which software/hardware uses that driver - the
>> printer, the video card, etc.?

>
>
>.
>

The printer probably has a "Toolbox" feature which monitors the ink level,
this is bidirectional communication which the system sees as in use. This
may be the cause of your problem. If you don't need this feature you can
uninstall it or disable it. It usually loads an icon in the systray. Canon's
used to be difficult to disable, but I have not tried in a few years. HTH

--


The best live web video on the internet http://www.seedsv.com/webdemo.htm
Sharpvision simply the best http://www.seedsv.com



"kwindham (remove) @advstr.com" <anonymous@discussions.microsoft.com> wrote
in message news:05d701c3ca6b$32cb46c0$a001280a@phx.gbl...

> I have a printer (Canon BJC-2010) directly connected to
> parallel port (and have since April 2003. Had just
> recently upgraded the BIOS, ATI Radeon 9000 video card
> and modem and Roxio Easy CD Creator 5.
>

> >-----Original Message-----
> >How about if you tell us what is connected to your

> computer instead of us

> >trying to guess.
> >
> >--
> >
> >
> >The best live web video on the internet

> http://www.seedsv.com/webdemo.htm

> >Sharpvision simply the best http://www.seedsv.com
> >
> >
> >
> >"torey" <anonymous@discussions.microsoft.com> wrote in

> message

> >news:005501c3ca55$730f9da0$a601280a@phx.gbl...

> >> When trying to use "stand by" or "hibernate" modes, I

> get

> >> the message that "printer port logical interface"

> device

> >> is being used by another application. Does anyone have
> >> an idea which software/hardware uses that driver - the
> >> printer, the video card, etc.?

> >
> >
> >.
> >