problem with Vista and ATI Radeon X1650 PRO AGP

> Before changing the card, be sure to reset the Video card drivers back to
> standard VGA.
> Shut down the machine and replace the card with the new one and boot it
> would find new hardware and then let it install the drivers.
>
> Not going back to standard VGA can block the new drivers.
>
> Ko.
> "linmill" <linmill@discussions.microsoft.com> schreef in bericht
> news:EDE2E3B9-2026-4BC5-8D4E-E2D93E2ED775@microsoft.com...

> > I'm having an issue with vista and my x1650 pro.I have an upgrade version
> > of
> > home premium . i am going thru ati at the same time but the asked me this
> > last time if it was an upgraded version. What would that matter? here is
> > the
> > error; atikmdag.sys page_fault_in_nonpaged_ area. I cant do the work
> > around.
> > this is what i get, your current display driver does not allow change to
> > be
> > made to hardware acc.settings. I can go to safe mode but it wont save it.
> > I
> > am running 2 hard drives 1 with xp 1 with vista. it doesnt matter what i
> > do
> > , I can unhook the 1 with xp and still the same thing. it does work great
> > in
> > xp. I put my 9550 in and all is well. but I just bought the X1650 pro AGP
> > and
> > want it to work with vista. Please help. Thank you, Linda Miller

>
>
>

> isn't that the same as uninstalling the old drivers? that is what ati
> tells
> you to do and i did that.
>
> "koze" wrote:
>

>> Before changing the card, be sure to reset the Video card drivers back to
>> standard VGA.
>> Shut down the machine and replace the card with the new one and boot it
>> would find new hardware and then let it install the drivers.
>>
>> Not going back to standard VGA can block the new drivers.
>>
>> Ko.
>> "linmill" <linmill@discussions.microsoft.com> schreef in bericht
>> news:EDE2E3B9-2026-4BC5-8D4E-E2D93E2ED775@microsoft.com...

>> > I'm having an issue with vista and my x1650 pro.I have an upgrade
>> > version
>> > of
>> > home premium . i am going thru ati at the same time but the asked me
>> > this
>> > last time if it was an upgraded version. What would that matter? here
>> > is
>> > the
>> > error; atikmdag.sys page_fault_in_nonpaged_ area. I cant do the work
>> > around.
>> > this is what i get, your current display driver does not allow change
>> > to
>> > be
>> > made to hardware acc.settings. I can go to safe mode but it wont save
>> > it.
>> > I
>> > am running 2 hard drives 1 with xp 1 with vista. it doesnt matter what
>> > i
>> > do
>> > , I can unhook the 1 with xp and still the same thing. it does work
>> > great
>> > in
>> > xp. I put my 9550 in and all is well. but I just bought the X1650 pro
>> > AGP
>> > and
>> > want it to work with vista. Please help. Thank you, Linda Miller

>>
>>
>>

> Not quit the same, in essence yes, but with resetting the video card to VGA
> it also take's care of the registry.
>
> Ko.
>
> "linmill" <linmill@discussions.microsoft.com> schreef in bericht
> news:BBB2B255-CFAC-47DC-BE61-FF4D58E894C5@microsoft.com...

> > isn't that the same as uninstalling the old drivers? that is what ati
> > tells
> > you to do and i did that.
> >
> > "koze" wrote:
> >

> >> Before changing the card, be sure to reset the Video card drivers back to
> >> standard VGA.
> >> Shut down the machine and replace the card with the new one and boot it
> >> would find new hardware and then let it install the drivers.
> >>
> >> Not going back to standard VGA can block the new drivers.
> >>
> >> Ko.
> >> "linmill" <linmill@discussions.microsoft.com> schreef in bericht
> >> news:EDE2E3B9-2026-4BC5-8D4E-E2D93E2ED775@microsoft.com...
> >> > I'm having an issue with vista and my x1650 pro.I have an upgrade
> >> > version
> >> > of
> >> > home premium . i am going thru ati at the same time but the asked me
> >> > this
> >> > last time if it was an upgraded version. What would that matter? here
> >> > is
> >> > the
> >> > error; atikmdag.sys page_fault_in_nonpaged_ area. I cant do the work
> >> > around.
> >> > this is what i get, your current display driver does not allow change
> >> > to
> >> > be
> >> > made to hardware acc.settings. I can go to safe mode but it wont save
> >> > it.
> >> > I
> >> > am running 2 hard drives 1 with xp 1 with vista. it doesnt matter what
> >> > i
> >> > do
> >> > , I can unhook the 1 with xp and still the same thing. it does work
> >> > great
> >> > in
> >> > xp. I put my 9550 in and all is well. but I just bought the X1650 pro
> >> > AGP
> >> > and
> >> > want it to work with vista. Please help. Thank you, Linda Miller
> >>
> >>
> >>

>
>
>

> Ok, so how do I do that? Is that the rolling back of drivers? thanks ahead
> of
> time.
>
> "koze" wrote:
>

>> Not quit the same, in essence yes, but with resetting the video card to
>> VGA
>> it also take's care of the registry.
>>
>> Ko.
>>
>> "linmill" <linmill@discussions.microsoft.com> schreef in bericht
>> news:BBB2B255-CFAC-47DC-BE61-FF4D58E894C5@microsoft.com...

>> > isn't that the same as uninstalling the old drivers? that is what ati
>> > tells
>> > you to do and i did that.
>> >
>> > "koze" wrote:
>> >
>> >> Before changing the card, be sure to reset the Video card drivers back
>> >> to
>> >> standard VGA.
>> >> Shut down the machine and replace the card with the new one and boot
>> >> it
>> >> would find new hardware and then let it install the drivers.
>> >>
>> >> Not going back to standard VGA can block the new drivers.
>> >>
>> >> Ko.
>> >> "linmill" <linmill@discussions.microsoft.com> schreef in bericht
>> >> news:EDE2E3B9-2026-4BC5-8D4E-E2D93E2ED775@microsoft.com...
>> >> > I'm having an issue with vista and my x1650 pro.I have an upgrade
>> >> > version
>> >> > of
>> >> > home premium . i am going thru ati at the same time but the asked
>> >> > me
>> >> > this
>> >> > last time if it was an upgraded version. What would that matter?
>> >> > here
>> >> > is
>> >> > the
>> >> > error; atikmdag.sys page_fault_in_nonpaged_ area. I cant do the
>> >> > work
>> >> > around.
>> >> > this is what i get, your current display driver does not allow
>> >> > change
>> >> > to
>> >> > be
>> >> > made to hardware acc.settings. I can go to safe mode but it wont
>> >> > save
>> >> > it.
>> >> > I
>> >> > am running 2 hard drives 1 with xp 1 with vista. it doesnt matter
>> >> > what
>> >> > i
>> >> > do
>> >> > , I can unhook the 1 with xp and still the same thing. it does work
>> >> > great
>> >> > in
>> >> > xp. I put my 9550 in and all is well. but I just bought the X1650
>> >> > pro
>> >> > AGP
>> >> > and
>> >> > want it to work with vista. Please help. Thank you, Linda Miller
>> >>
>> >>
>> >>

>>
>>
>>