Problems with Domain Join for XPE FP2007

Posted: 02-26-2007, 06:25 PM
I've built what seems to be a working XPE for XP Pro image. When I
try to do a domain join, I'm getting various errors that prevent the
domain join from succeeding. Are there any non obvious components or
registry settings I should try,

Thanks

Reply With Quote

Responses to "Problems with Domain Join for XPE FP2007"

KM
Guest
Posts: n/a
 
Re: Problems with Domain Join for XPE FP2007
Posted: 02-26-2007, 06:59 PM
artk,

You want to have Winlogon and "Netlogon/Netjoin" components in your image.

However, if you start with "Domain Participation" macro and resolve all its dependencies it should bring in all the required
components.

If the above doesn't help you may want to post info here about the errors you are getting.
--
=========
Regards,
KM


"artk" <artk@congruent.com> wrote in message news:1172514355.191047.15390@a75g2000cwd.googlegro ups.com...
> I've built what seems to be a working XPE for XP Pro image. When I
> try to do a domain join, I'm getting various errors that prevent the
> domain join from succeeding. Are there any non obvious components or
> registry settings I should try,
>
> Thanks

Reply With Quote
artk
Guest
Posts: n/a
 
Re: Problems with Domain Join for XPE FP2007
Posted: 02-26-2007, 10:30 PM
Both were included. When I attempt the join, a popup returns saying
"The specified server cannot perform then requested operation" The
same username\password works on xp pro against the same dc. When i
try with a bad password, it returns "Logon failure: unknow user name
or bad password"



On Feb 26, 10:59 am, "KM" <konstmor@nospam_yahoo.com> wrote:
> artk,
>
> You want to have Winlogon and "Netlogon/Netjoin" components in your image.
>
> However, if you start with "Domain Participation" macro and resolve all its dependencies it should bring in all the required
> components.
>
> If the above doesn't help you may want to post info here about the errors you are getting.
> --
> =========
> Regards,
> KM
>
>
>
> "artk" <a...@congruent.com> wrote in messagenews:1172514355.191047.15390@a75g2000cwd.go oglegroups.com...
> > I've built what seems to be a working XPE for XP Pro image. When I
> > try to do a domain join, I'm getting various errors that prevent the
> > domain join from succeeding. Are there any non obvious components or
> > registry settings I should try,
>
> > Thanks- Hide quoted text -
>
> - Show quoted text -

Reply With Quote
KM
Guest
Posts: n/a
 
Re: Problems with Domain Join for XPE FP2007
Posted: 02-27-2007, 06:00 AM
The error you mentioned is too general to guess what might be wrong with your device.

If you logon to local account (not to domain), are you able to get to domain resources using the same domain user account
credentials? E.g., using net commands providing that user account settings?

You may want to take a look at system common logs to see what went wrong during FBA:
- Event Logs
- FBALog.txt
- SetuApi.log (not muc relevant here but always helps)


Also, you can enable audit and logging on the server side and see why it is rejecting the client logon request.

--
=========
Regards,
KM


"artk" <artk@congruent.com> wrote in message news:1172529026.306876.78490@h3g2000cwc.googlegrou ps.com...
> Both were included. When I attempt the join, a popup returns saying
> "The specified server cannot perform then requested operation" The
> same username\password works on xp pro against the same dc. When i
> try with a bad password, it returns "Logon failure: unknow user name
> or bad password"
>
>
>
> On Feb 26, 10:59 am, "KM" <konstmor@nospam_yahoo.com> wrote:
>> artk,
>>
>> You want to have Winlogon and "Netlogon/Netjoin" components in your image.
>>
>> However, if you start with "Domain Participation" macro and resolve all its dependencies it should bring in all the required
>> components.
>>
>> If the above doesn't help you may want to post info here about the errors you are getting.
>> --
>> =========
>> Regards,
>> KM
>>
>>
>>
>> "artk" <a...@congruent.com> wrote in messagenews:1172514355.191047.15390@a75g2000cwd.go oglegroups.com...
>> > I've built what seems to be a working XPE for XP Pro image. When I
>> > try to do a domain join, I'm getting various errors that prevent the
>> > domain join from succeeding. Are there any non obvious components or
>> > registry settings I should try,
>>
>> > Thanks- Hide quoted text -
>>
>> - Show quoted text -
>
>

Reply With Quote
artk
Guest
Posts: n/a
 
Re: Problems with Domain Join for XPE FP2007
Posted: 02-27-2007, 04:28 PM
I can do a net use on a domain share using the user\password that
doesn't allow me to join the domain. FBALOG.txt clean,


On Feb 26, 10:00 pm, "KM" <konstmor@nospam_yahoo.com> wrote:
> The error you mentioned is too general to guess what might be wrong with your device.
>
> If you logon to local account (not to domain), are you able to get to domain resources using the same domain user account
> credentials? E.g., using net commands providing that user account settings?
>
> You may want to take a look at system common logs to see what went wrong during FBA:
> - Event Logs
> - FBALog.txt
> - SetuApi.log (not muc relevant here but always helps)
>
> Also, you can enable audit and logging on the server side and see why it is rejecting the client logon request.
>
> --
> =========
> Regards,
> KM
>
>
>
> "artk" <a...@congruent.com> wrote in messagenews:1172529026.306876.78490@h3g2000cwc.goo glegroups.com...
> > Both were included. When I attempt the join, a popup returns saying
> > "The specified server cannot perform then requested operation" The
> > same username\password works on xp pro against the same dc. When i
> > try with a bad password, it returns "Logon failure: unknow user name
> > or bad password"
>
> > On Feb 26, 10:59 am, "KM" <konstmor@nospam_yahoo.com> wrote:
> >> artk,
>
> >> You want to have Winlogon and "Netlogon/Netjoin" components in your image.
>
> >> However, if you start with "Domain Participation" macro and resolve all its dependencies it should bring in all the required
> >> components.
>
> >> If the above doesn't help you may want to post info here about the errors you are getting.
> >> --
> >> =========
> >> Regards,
> >> KM
>
> >> "artk" <a...@congruent.com> wrote in messagenews:1172514355.191047.15390@a75g2000cwd.go oglegroups.com...
> >> > I've built what seems to be a working XPE for XP Pro image. When I
> >> > try to do a domain join, I'm getting various errors that prevent the
> >> > domain join from succeeding. Are there any non obvious components or
> >> > registry settings I should try,
>
> >> > Thanks- Hide quoted text -
>
> >> - Show quoted text -- Hide quoted text -
>
> - Show quoted text -

Reply With Quote
KM
Guest
Posts: n/a
 
Re: Problems with Domain Join for XPE FP2007
Posted: 02-27-2007, 05:48 PM
artk,

I never had troubles with the domain if I included and resolve dependencies of the Domain Participation.

I can only think of the following:
- Is your runtime English based? There were some bugs reported on MUI runtimes with access to domain back in SP1/SP2 times.
Check out product and MUI Release Notes.
- Did you try building heavy image including lost of [most of] components from database. Is the problem reproducible there? As a
start you can use XPProEmulation (FP2007) project from www.xpefiles.com.
- Again, you need to get more details about the issue from the server side. It is very unclear now what the error is occurring
there.

--
=========
Regards,
KM
>I can do a net use on a domain share using the user\password that
> doesn't allow me to join the domain. FBALOG.txt clean,
>
>
> On Feb 26, 10:00 pm, "KM" <konstmor@nospam_yahoo.com> wrote:
>> The error you mentioned is too general to guess what might be wrong with your device.
>>
>> If you logon to local account (not to domain), are you able to get to domain resources using the same domain user account
>> credentials? E.g., using net commands providing that user account settings?
>>
>> You may want to take a look at system common logs to see what went wrong during FBA:
>> - Event Logs
>> - FBALog.txt
>> - SetuApi.log (not muc relevant here but always helps)
>>
>> Also, you can enable audit and logging on the server side and see why it is rejecting the client logon request.
>>
>> --
>> =========
>> Regards,
>> KM
>>
>>
>>
>> "artk" <a...@congruent.com> wrote in messagenews:1172529026.306876.78490@h3g2000cwc.goo glegroups.com...
>> > Both were included. When I attempt the join, a popup returns saying
>> > "The specified server cannot perform then requested operation" The
>> > same username\password works on xp pro against the same dc. When i
>> > try with a bad password, it returns "Logon failure: unknow user name
>> > or bad password"
>>
>> > On Feb 26, 10:59 am, "KM" <konstmor@nospam_yahoo.com> wrote:
>> >> artk,
>>
>> >> You want to have Winlogon and "Netlogon/Netjoin" components in your image.
>>
>> >> However, if you start with "Domain Participation" macro and resolve all its dependencies it should bring in all the required
>> >> components.
>>
>> >> If the above doesn't help you may want to post info here about the errors you are getting.
>> >> --
>> >> =========
>> >> Regards,
>> >> KM
>>
>> >> "artk" <a...@congruent.com> wrote in messagenews:1172514355.191047.15390@a75g2000cwd.go oglegroups.com...
>> >> > I've built what seems to be a working XPE for XP Pro image. When I
>> >> > try to do a domain join, I'm getting various errors that prevent the
>> >> > domain join from succeeding. Are there any non obvious components or
>> >> > registry settings I should try,
>>
>> >> > Thanks- Hide quoted text -
>>
>> >> - Show quoted text -- Hide quoted text -
>>
>> - Show quoted text -
>
>

Reply With Quote
JS
Guest
Posts: n/a
 
Re: Problems with Domain Join for XPE FP2007
Posted: 02-28-2007, 12:22 AM
- try disabling the firewall and using a static ip
- check your dns server for duplicate entries with your device name
- ensure your device is using a new SID (there can only be one device in the
domain with a given SID)


"artk" <artk@congruent.com> wrote in message
news:1172593683.895662.119360@s48g2000cws.googlegr oups.com...
>I can do a net use on a domain share using the user\password that
> doesn't allow me to join the domain. FBALOG.txt clean,
>
>
> On Feb 26, 10:00 pm, "KM" <konstmor@nospam_yahoo.com> wrote:
>> The error you mentioned is too general to guess what might be wrong with
>> your device.
>>
>> If you logon to local account (not to domain), are you able to get to
>> domain resources using the same domain user account
>> credentials? E.g., using net commands providing that user account
>> settings?
>>
>> You may want to take a look at system common logs to see what went wrong
>> during FBA:
>> - Event Logs
>> - FBALog.txt
>> - SetuApi.log (not muc relevant here but always helps)
>>
>> Also, you can enable audit and logging on the server side and see why it
>> is rejecting the client logon request.
>>
>> --
>> =========
>> Regards,
>> KM
>>
>>
>>
>> "artk" <a...@congruent.com> wrote in
>> messagenews:1172529026.306876.78490@h3g2000cwc.goo glegroups.com...
>> > Both were included. When I attempt the join, a popup returns saying
>> > "The specified server cannot perform then requested operation" The
>> > same username\password works on xp pro against the same dc. When i
>> > try with a bad password, it returns "Logon failure: unknow user name
>> > or bad password"
>>
>> > On Feb 26, 10:59 am, "KM" <konstmor@nospam_yahoo.com> wrote:
>> >> artk,
>>
>> >> You want to have Winlogon and "Netlogon/Netjoin" components in your
>> >> image.
>>
>> >> However, if you start with "Domain Participation" macro and resolve
>> >> all its dependencies it should bring in all the required
>> >> components.
>>
>> >> If the above doesn't help you may want to post info here about the
>> >> errors you are getting.
>> >> --
>> >> =========
>> >> Regards,
>> >> KM
>>
>> >> "artk" <a...@congruent.com> wrote in
>> >> messagenews:1172514355.191047.15390@a75g2000cwd.go oglegroups.com...
>> >> > I've built what seems to be a working XPE for XP Pro image. When I
>> >> > try to do a domain join, I'm getting various errors that prevent the
>> >> > domain join from succeeding. Are there any non obvious components
>> >> > or
>> >> > registry settings I should try,
>>
>> >> > Thanks- Hide quoted text -
>>
>> >> - Show quoted text -- Hide quoted text -
>>
>> - Show quoted text -
>
>

Reply With Quote
 
LinkBack Thread Tools Display Modes
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How do i make a win xp pro computer a domain server? So that my other computers can join its domain. Guest Windows NT/2000/XP 0 03-08-2008 07:41 AM
Problems when installing XPe SP2 FP2007 Alexander Windows XP Embedded 2 02-05-2007 09:31 AM
join domain problems Roberto Windows Vista Networking & Sharing 4 02-02-2007 10:15 PM
XP pro will not join NT 4.0 domain Shaun Windows XP Network & Web 0 08-05-2003 07:29 PM
PLEASE ANYONE HELP xp cant join a domain Brian Windows XP Network & Web 1 07-03-2003 06:45 PM


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90