Problems when I upgraded to XP

Posted: 12-22-2003, 10:22 PM
I upgraded to windows xp yesterday. Now I cannot access
any of my cd's that I had files saved on. It says the
disk is empty. I had formatted the disk in Win Me with
Create CD so I could save the files directly to disk.
How can I acces these disks and retrieve my information?
(If I have to reinstall Me, then redo XP, I will.) I
have tried to acces the disk through MS-DOS command, but
it says the disk is either write protected or unreadable,
(NO matter if it is in my DVD or Writeable drive)
Also, I get a NT authority\security(something like that)
message then XP restarts. It does that about once an
hour. Any help would be appreciated. Thanks.
Reply With Quote

Responses to "Problems when I upgraded to XP"

Michael Solomon \(MS-MVP Windows Shell/User\)
Guest
Posts: n/a
 
Re: Problems when I upgraded to XP
Posted: 12-22-2003, 10:34 PM
This
requires third party software such as the Direct CD component of Easy CD
Creator, www.roxio.com or the InCD component of Nero, www.nero.com.

Check the web sites for version compatibility with XP as well as compatible
CD-Writers.

***NOTE*** The version of Easy CD Creator you used with XP, even if still
installed after the upgrade may not be compatible with XP. XP is compatible
with Easy CD Creator version 5 with a patch from the Roxio site and Easy CD
Creator version 6. If you have one of those and the patch if version 5, you
may need to remove Easy CD Creator and reinstall. NOTE: during setup of
version 5 you will receive a message telling you that this version of Direct
CD is not compatible with XP. Continue to install answering yes to the
question asking if you wish to continue installing Direct CD. After you
reboot, you will receive a notice that Direct CD has been disabled, install
the patch from Roxio, reboot and it should be fine.
--
Michael Solomon MS-MVP
Windows Shell/User
Backup is a PC User's Best Friend
DTS-L.Org: http://www.dts-l.org/

"Nancy" <anonymous@discussions.microsoft.com> wrote in message
news:038701c3c8da$140a2220$a301280a@phx.gbl...
>I upgraded to windows xp yesterday. Now I cannot access
> any of my cd's that I had files saved on. It says the
> disk is empty. I had formatted the disk in Win Me with
> Create CD so I could save the files directly to disk.
> How can I acces these disks and retrieve my information?
> (If I have to reinstall Me, then redo XP, I will.) I
> have tried to acces the disk through MS-DOS command, but
> it says the disk is either write protected or unreadable,
> (NO matter if it is in my DVD or Writeable drive)
> Also, I get a NT authority\security(something like that)
> message then XP restarts. It does that about once an
> hour. Any help would be appreciated. Thanks.

Reply With Quote
Sharon F
Guest
Posts: n/a
 
Re: Problems when I upgraded to XP
Posted: 12-23-2003, 05:05 AM
On Mon, 22 Dec 2003 14:22:26 -0800, Nancy wrote:
> Also, I get a NT authority\security(something like that)
> message then XP restarts. It does that about once an
> hour. Any help would be appreciated. Thanks.
Your system may be infected with the Blaster Worm.

See the references below for more information about what it is, how to
remove it (if this the cause of your problem) and how to protect your
system against future infection.

What You Should Know About the Blaster Worm
http://www.microsoft.com/security/incident/blast.asp

W32.Blaster.Worm Removal Tool
http://securityresponse.symantec.com...blaster.worm.r
emoval.tool.html

MS-MVP Kelly Theriot's Repair Solution:
http://www.kellys-korner-xp.com/xp_qr.htm#rpc
--
Sharon F
MS MVP - Windows XP Shell/User
Reply With Quote
Ken Blake
Guest
Posts: n/a
 
Re: Problems when I upgraded to XP
Posted: 12-23-2003, 09:29 PM
In news:038701c3c8da$140a2220$a301280a@phx.gbl,
Nancy <anonymous@discussions.microsoft.com> typed:
> Also, I get a NT authority\security(something like that)
> message then XP restarts. It does that about once an
> hour. Any help would be appreciated. Thanks.

You have the MSBlaster worm. To remove it, do the following:

The following instructions are in three parts

1. Stop it from running

2. Remove it from your system

3. Make sure it doesn't come back



Before beginning, if you have an always-on internet connection,
it's a good idea to disconnect it.



1. Stop it from running

Press Ctrl-Alt-Delete to bring up the Task Manager, then on the
Processes tab, click msblast.exe and then "End process." Reply
"Yes" to the warning message that comes up.

This stops the worm from running, so your system will not shut
down. However, it doesn't remove it, and if that's all you do, it
will start up again the next time you boot.


***

2. Remove it from your system

a. Start the registry editor program, regedit, by going to Start
| Run, and typing REGEDIT
Navigate to HKEY_Local_Machine\Software\Microsoft\Windows\Curr ent
Version\Run by clicking the plus signs next to each of the
folders in the left hand pane. When you get to the last of them,
Run, click the word Run itself.

Find an entry called "Windows Auto Update" on the right side.
Right-click it and delete it.

b. Do a Windows search for msblast, and delete all files found.

The worm is now gone, and won't start again the next time you
boot. But if that's all you do, you can get reinfected just as
you did the first time.

***


3. Make sure it doesn't come back

a. Make sure you're running a firewall that prevents worms like
this from getting in. You can enable the built-in Windows XP
firewall, or download and install another one such as the free
version of ZoneAlarm. To enable the built-in firewall, go to
Control Panel, double-click Networking and Internet Connections,
then click Network Connections. Right-click your connection, then
click Properties, and on the Advanced tab, click the option
"Protect my computer and network..."


b. If you've disconnected your internet connection, reconnect it.
Download and install the Microsoft patch at
http://download.microsoft.com/downlo...80-x86-ENU.exe

That will remove the vulnerability that the worm exploits.


c. Be sure you are running an anti-virus program, and that you
regularly download the latest updated virus definitions.

--
Ken Blake - Microsoft MVP Windows: Shell/User
Please reply to the newsgroup

Reply With Quote
 
LinkBack Thread Tools Display Modes
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Upgraded to XP Gene Cooper Windows XP Photos 2 05-03-2004 08:13 PM
Using XP Pro & upgraded to XP Home on my old computer - now email problems George Cruppi Windows XP Help & Support 0 10-14-2003 09:39 PM
98 upgraded to XP Peachy Windows XP Setup 1 10-10-2003 12:42 PM
Upgraded to XP and... Zack Windows XP Performance & Maintenance 1 07-29-2003 11:14 AM
Just upgraded from 98 SE to XP Brandy Windows XP Basics 2 07-24-2003 04:31 PM


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90