RC1: MEMORY_MANAGEMENT BSOD during "Expanding Files"

Just curious:

at what % did you get BSOD during the step "Expanding files" ?

Thanks!

"CM" <CM@discussions.microsoft.com> wrote in message
news:1DE6B825-A0A2-4D0F-A97F-6AB5B0B0E1C3@microsoft.com...

> I'm trying to do a clean install of RC1, but get a BSOD with a
> MEMORY_MANAGEMENT issue while it is expanding files. I have tried both
> boot
> from DVD and installing from a different partition.
>
> Technical Details:
> STOP: 0x0000001A (0x00008887,0x0000AD97,0x00000000,0x00000000)
>
> The machine is fairly recent (Athlon XP 2400+, nForce2, 1GB RAM, ATI
> Radeon
> x1600PRO)
>
> Any clues?

It varies for me. When I booted from the DVD, I got it around 4% twice in a
row. When trying to install from XP (to a clean partition) I think it got to
around 27%.

"rogerlebo" wrote:

> Just curious:
>
> at what % did you get BSOD during the step "Expanding files" ?
>
> Thanks!
>
> "CM" <CM@discussions.microsoft.com> wrote in message
> news:1DE6B825-A0A2-4D0F-A97F-6AB5B0B0E1C3@microsoft.com...

> > I'm trying to do a clean install of RC1, but get a BSOD with a
> > MEMORY_MANAGEMENT issue while it is expanding files. I have tried both
> > boot
> > from DVD and installing from a different partition.
> >
> > Technical Details:
> > STOP: 0x0000001A (0x00008887,0x0000AD97,0x00000000,0x00000000)
> >
> > The machine is fairly recent (Athlon XP 2400+, nForce2, 1GB RAM, ATI
> > Radeon
> > x1600PRO)
> >
> > Any clues?

>
>

That is the first reboot point. It sounds like Setup could find the hard
drive. Do you need to provide a hard disk controller driver during the
initial phase of Setup?

"CM" <CM@discussions.microsoft.com> wrote in message
news:CAC2B97B-B5CF-446E-9AFF-86E3CFD97119@microsoft.com...

> It varies for me. When I booted from the DVD, I got it around 4% twice in
> a
> row. When trying to install from XP (to a clean partition) I think it got
> to
> around 27%.
>
> "rogerlebo" wrote:
>

>> Just curious:
>>
>> at what % did you get BSOD during the step "Expanding files" ?
>>
>> Thanks!
>>
>> "CM" <CM@discussions.microsoft.com> wrote in message
>> news:1DE6B825-A0A2-4D0F-A97F-6AB5B0B0E1C3@microsoft.com...

>> > I'm trying to do a clean install of RC1, but get a BSOD with a
>> > MEMORY_MANAGEMENT issue while it is expanding files. I have tried both
>> > boot
>> > from DVD and installing from a different partition.
>> >
>> > Technical Details:
>> > STOP: 0x0000001A (0x00008887,0x0000AD97,0x00000000,0x00000000)
>> >
>> > The machine is fairly recent (Athlon XP 2400+, nForce2, 1GB RAM, ATI
>> > Radeon
>> > x1600PRO)
>> >
>> > Any clues?

>>
>>

No, I didn't need to. It is a standard IDE controller on a nForce2 mobo. I
have installed Vista Beta 2 successfully on the same partition before.

"Colin Barnhorst" wrote:

> That is the first reboot point. It sounds like Setup could find the hard
> drive. Do you need to provide a hard disk controller driver during the
> initial phase of Setup?
>
> "CM" <CM@discussions.microsoft.com> wrote in message
> news:CAC2B97B-B5CF-446E-9AFF-86E3CFD97119@microsoft.com...

> > It varies for me. When I booted from the DVD, I got it around 4% twice in
> > a
> > row. When trying to install from XP (to a clean partition) I think it got
> > to
> > around 27%.
> >
> > "rogerlebo" wrote:
> >

> >> Just curious:
> >>
> >> at what % did you get BSOD during the step "Expanding files" ?
> >>
> >> Thanks!
> >>
> >> "CM" <CM@discussions.microsoft.com> wrote in message
> >> news:1DE6B825-A0A2-4D0F-A97F-6AB5B0B0E1C3@microsoft.com...
> >> > I'm trying to do a clean install of RC1, but get a BSOD with a
> >> > MEMORY_MANAGEMENT issue while it is expanding files. I have tried both
> >> > boot
> >> > from DVD and installing from a different partition.
> >> >
> >> > Technical Details:
> >> > STOP: 0x0000001A (0x00008887,0x0000AD97,0x00000000,0x00000000)
> >> >
> >> > The machine is fairly recent (Athlon XP 2400+, nForce2, 1GB RAM, ATI
> >> > Radeon
> >> > x1600PRO)
> >> >
> >> > Any clues?
> >>
> >>

>
>
>

"CM" <CM@discussions.microsoft.com> wrote in message
news:97C8416C-F2D4-4067-A417-6379E5B51038@microsoft.com...

> No, I didn't need to. It is a standard IDE controller on a nForce2 mobo.
> I
> have installed Vista Beta 2 successfully on the same partition before.
>
>

Another hair-brained, longshot:

Some people had a hard time installing previous Vista builds to a
drive/partition that had been formatted with Acronis. Something to do with
Vista using a slightly different NTFS than XP. Is this a possibility?

Correction: That was, could NOT find the hard drive. Sorry.

"Colin Barnhorst" <colinbarharst(remove)@msn.com> wrote in message
news:e90tKnszGHA.2636@TK2MSFTNGP06.phx.gbl...

> That is the first reboot point. It sounds like Setup could find the hard
> drive. Do you need to provide a hard disk controller driver during the
> initial phase of Setup?
>
> "CM" <CM@discussions.microsoft.com> wrote in message
> news:CAC2B97B-B5CF-446E-9AFF-86E3CFD97119@microsoft.com...

>> It varies for me. When I booted from the DVD, I got it around 4% twice
>> in a
>> row. When trying to install from XP (to a clean partition) I think it
>> got to
>> around 27%.
>>
>> "rogerlebo" wrote:
>>

>>> Just curious:
>>>
>>> at what % did you get BSOD during the step "Expanding files" ?
>>>
>>> Thanks!
>>>
>>> "CM" <CM@discussions.microsoft.com> wrote in message
>>> news:1DE6B825-A0A2-4D0F-A97F-6AB5B0B0E1C3@microsoft.com...
>>> > I'm trying to do a clean install of RC1, but get a BSOD with a
>>> > MEMORY_MANAGEMENT issue while it is expanding files. I have tried
>>> > both
>>> > boot
>>> > from DVD and installing from a different partition.
>>> >
>>> > Technical Details:
>>> > STOP: 0x0000001A (0x00008887,0x0000AD97,0x00000000,0x00000000)
>>> >
>>> > The machine is fairly recent (Athlon XP 2400+, nForce2, 1GB RAM, ATI
>>> > Radeon
>>> > x1600PRO)
>>> >
>>> > Any clues?
>>>
>>>

>
>

Yay, im not the only one. I was trying to install pre-rc1 and get the same
crap. Tryed installing clean, tryed upgrading beta 2, tryed installing
through XP, tryed installing through a virtual drive... Everytime I get that
Blue screen with the same messege. Most the time it did it at 26% of
expanding files, there were a couple times it did it at random times. But
then the damn thing just automatically uninstalls and returns the system back
to where I started. One time I got all the way to Finalizing setup then it
gave me the BSOD. MEMORY_MANAGMENT What the hell does that mean. Only thing I
could think was it was a bad download but hey there are others... so I dunno.

"CM" wrote:

> I'm trying to do a clean install of RC1, but get a BSOD with a
> MEMORY_MANAGEMENT issue while it is expanding files. I have tried both boot
> from DVD and installing from a different partition.
>
> Technical Details:
> STOP: 0x0000001A (0x00008887,0x0000AD97,0x00000000,0x00000000)
>
> The machine is fairly recent (Athlon XP 2400+, nForce2, 1GB RAM, ATI Radeon
> x1600PRO)
>
> Any clues?

"PimpTwzt" <PimpTwzt@discussions.microsoft.com> wrote in message
news:79C6D429-F79C-4034-9A8E-8950D62CA0B6@microsoft.com...

> Yay, im not the only one. I was trying to install pre-rc1 and get the same
> crap. Tryed installing clean, tryed upgrading beta 2, tryed installing
> through XP, tryed installing through a virtual drive... Everytime I get
> that
> Blue screen with the same messege. Most the time it did it at 26% of
> expanding files, there were a couple times it did it at random times. But
> then the damn thing just automatically uninstalls and returns the system
> back
> to where I started. One time I got all the way to Finalizing setup then it
> gave me the BSOD. MEMORY_MANAGMENT What the hell does that mean. Only
> thing I
> could think was it was a bad download but hey there are others... so I
> dunno.
>
>

Not sure about this build, but with 5384, the error at 26% was always
indicative of SATA controller drivers not being loaded when installing. Do
you have SATA hard drives?