RC2 5744 Cisco VPN 4.8.01.0410 BETA

Posted: 10-09-2006, 08:13 AM
Hi,

I can not get the VPN client to work with RC2 (did not manage with RC1
either actually). I get the logon dialogue box, but after that the status
bar keepis showing the "securing communnications channel" message for ever
and never finishing the connection.

Have anyone managed to get this to work and if so what are your config?

//Hannes

Reply With Quote

Responses to "RC2 5744 Cisco VPN 4.8.01.0410 BETA"

Brent
Guest
Posts: n/a
 
RE: RC2 5744 Cisco VPN 4.8.01.0410 BETA
Posted: 10-11-2006, 07:01 AM
Hi,

I got it to work with RC1 but not with RC2. Anybody having success?

Thank you,
Brent

"Hannes" wrote:
> Hi,
>
> I can not get the VPN client to work with RC2 (did not manage with RC1
> either actually). I get the logon dialogue box, but after that the status
> bar keepis showing the "securing communnications channel" message for ever
> and never finishing the connection.
>
> Have anyone managed to get this to work and if so what are your config?
>
> //Hannes
>
Reply With Quote
Hal9000
Guest
Posts: n/a
 
Re: RC2 5744 Cisco VPN 4.8.01.0410 BETA
Posted: 10-11-2006, 04:04 PM
it works for me on RC2, in the sense that it successfully establishes a vpn
connection.
but then I have the same damn problem I am having since beta 2... a few
seconds/minutes after vpn connection is established and working, the whole
connectivity breaks down: unable to resolve hostnames, unable to communicate
with anything, not even the ordinary connection. disconnecting vpn makes the
ordinary connection work again, at least...
I still have been unable to find out what the problem is, and have been
hoping on each new vista build that this would get fixed... but no...
perhaps it’s a cisco problem
this sucks so much!
hal

"Brent" <Brent@discussions.microsoft.com> wrote in message
news:8EBF4351-7E9E-44B2-958E-651CBB31EFC0@microsoft.com...
> Hi,
>
> I got it to work with RC1 but not with RC2. Anybody having success?
>
> Thank you,
> Brent
>
> "Hannes" wrote:
>
>> Hi,
>>
>> I can not get the VPN client to work with RC2 (did not manage with RC1
>> either actually). I get the logon dialogue box, but after that the status
>> bar keepis showing the "securing communnications channel" message for
>> ever
>> and never finishing the connection.
>>
>> Have anyone managed to get this to work and if so what are your config?
>>
>> //Hannes
>>
Reply With Quote
Brent
Guest
Posts: n/a
 
Re: RC2 5744 Cisco VPN 4.8.01.0410 BETA
Posted: 10-11-2006, 05:09 PM
Hi,

With RC1 I got it to keep the connection for a lot longer if I set Outlook
to send/receive 1/min (kept the connection being used).

Take care,
Brent

"Hal9000" wrote:
> it works for me on RC2, in the sense that it successfully establishes a vpn
> connection.
> but then I have the same damn problem I am having since beta 2... a few
> seconds/minutes after vpn connection is established and working, the whole
> connectivity breaks down: unable to resolve hostnames, unable to communicate
> with anything, not even the ordinary connection. disconnecting vpn makes the
> ordinary connection work again, at least...
> I still have been unable to find out what the problem is, and have been
> hoping on each new vista build that this would get fixed... but no...
> perhaps it’s a cisco problem
> this sucks so much!
> hal
>
> "Brent" <Brent@discussions.microsoft.com> wrote in message
> news:8EBF4351-7E9E-44B2-958E-651CBB31EFC0@microsoft.com...
> > Hi,
> >
> > I got it to work with RC1 but not with RC2. Anybody having success?
> >
> > Thank you,
> > Brent
> >
> > "Hannes" wrote:
> >
> >> Hi,
> >>
> >> I can not get the VPN client to work with RC2 (did not manage with RC1
> >> either actually). I get the logon dialogue box, but after that the status
> >> bar keepis showing the "securing communnications channel" message for
> >> ever
> >> and never finishing the connection.
> >>
> >> Have anyone managed to get this to work and if so what are your config?
> >>
> >> //Hannes
> >>
>
Reply With Quote
Hal9000
Guest
Posts: n/a
 
Re: RC2 5744 Cisco VPN 4.8.01.0410 BETA
Posted: 10-12-2006, 10:07 AM
my connection dies while I am using it, so there must be some other
problem...
what protocol does your vpn connection use? I think I have ipsec/udp...
weird weird weird... I also tried using the other ethernet connection (I
have an nVidia nforce 4 gbit LAN and a Marvell Yukon gbit LAN) but same
problem.
is there any newer vpn client than 4.8.0.1.0410 by now?
s.

"Brent" <Brent@discussions.microsoft.com> wrote in message
news:482A1D97-C280-4D2E-B754-53A1F661C34F@microsoft.com...
> Hi,
>
> With RC1 I got it to keep the connection for a lot longer if I set Outlook
> to send/receive 1/min (kept the connection being used).
>
> Take care,
> Brent
>
> "Hal9000" wrote:
>
>> it works for me on RC2, in the sense that it successfully establishes a
>> vpn
>> connection.
>> but then I have the same damn problem I am having since beta 2... a few
>> seconds/minutes after vpn connection is established and working, the
>> whole
>> connectivity breaks down: unable to resolve hostnames, unable to
>> communicate
>> with anything, not even the ordinary connection. disconnecting vpn makes
>> the
>> ordinary connection work again, at least...
>> I still have been unable to find out what the problem is, and have been
>> hoping on each new vista build that this would get fixed... but no...
>> perhaps it’s a cisco problem
>> this sucks so much!
>> hal
>>
>> "Brent" <Brent@discussions.microsoft.com> wrote in message
>> news:8EBF4351-7E9E-44B2-958E-651CBB31EFC0@microsoft.com...
>> > Hi,
>> >
>> > I got it to work with RC1 but not with RC2. Anybody having success?
>> >
>> > Thank you,
>> > Brent
>> >
>> > "Hannes" wrote:
>> >
>> >> Hi,
>> >>
>> >> I can not get the VPN client to work with RC2 (did not manage with RC1
>> >> either actually). I get the logon dialogue box, but after that the
>> >> status
>> >> bar keepis showing the "securing communnications channel" message for
>> >> ever
>> >> and never finishing the connection.
>> >>
>> >> Have anyone managed to get this to work and if so what are your
>> >> config?
>> >>
>> >> //Hannes
>> >>
>>
Reply With Quote
Dr. Bauer
Guest
Posts: n/a
 
Re: RC2 5744 Cisco VPN 4.8.01.0410 BETA
Posted: 10-12-2006, 10:14 PM
The latest version is 4.8.01.0590

"Hal9000" wrote:
> my connection dies while I am using it, so there must be some other
> problem...
> what protocol does your vpn connection use? I think I have ipsec/udp...
> weird weird weird... I also tried using the other ethernet connection (I
> have an nVidia nforce 4 gbit LAN and a Marvell Yukon gbit LAN) but same
> problem.
> is there any newer vpn client than 4.8.0.1.0410 by now?
> s.
>
> "Brent" <Brent@discussions.microsoft.com> wrote in message
> news:482A1D97-C280-4D2E-B754-53A1F661C34F@microsoft.com...
> > Hi,
> >
> > With RC1 I got it to keep the connection for a lot longer if I set Outlook
> > to send/receive 1/min (kept the connection being used).
> >
> > Take care,
> > Brent
> >
> > "Hal9000" wrote:
> >
> >> it works for me on RC2, in the sense that it successfully establishes a
> >> vpn
> >> connection.
> >> but then I have the same damn problem I am having since beta 2... a few
> >> seconds/minutes after vpn connection is established and working, the
> >> whole
> >> connectivity breaks down: unable to resolve hostnames, unable to
> >> communicate
> >> with anything, not even the ordinary connection. disconnecting vpn makes
> >> the
> >> ordinary connection work again, at least...
> >> I still have been unable to find out what the problem is, and have been
> >> hoping on each new vista build that this would get fixed... but no...
> >> perhaps it’s a cisco problem
> >> this sucks so much!
> >> hal
> >>
> >> "Brent" <Brent@discussions.microsoft.com> wrote in message
> >> news:8EBF4351-7E9E-44B2-958E-651CBB31EFC0@microsoft.com...
> >> > Hi,
> >> >
> >> > I got it to work with RC1 but not with RC2. Anybody having success?
> >> >
> >> > Thank you,
> >> > Brent
> >> >
> >> > "Hannes" wrote:
> >> >
> >> >> Hi,
> >> >>
> >> >> I can not get the VPN client to work with RC2 (did not manage with RC1
> >> >> either actually). I get the logon dialogue box, but after that the
> >> >> status
> >> >> bar keepis showing the "securing communnications channel" message for
> >> >> ever
> >> >> and never finishing the connection.
> >> >>
> >> >> Have anyone managed to get this to work and if so what are your
> >> >> config?
> >> >>
> >> >> //Hannes
> >> >>
> >>
>
Reply With Quote
 
LinkBack Thread Tools Display Modes
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cisco VPN 4.8.01.410 and Vista RC1 Power Management Dan Pilone Windows Vista Networking & Sharing 1 01-14-2007 02:40 PM
Vista and VPN (Cisco Pix) Peter Windows Vista Networking & Sharing 2 09-05-2006 08:05 PM
Cisco VPN Client 4.8.01.0410 Hal9000 Windows Vista Networking & Sharing 2 08-29-2006 02:54 PM
CISCO VPN Client Krzysztof Mazurek Windows Vista Networking & Sharing 1 08-23-2006 05:51 AM
Internet Connectivity Problem with Cisco 831 TrooperT Windows Vista Networking & Sharing 1 06-29-2006 09:36 AM