set up a network Wifi safe

Posted: 12-17-2007, 11:34 PM
My name is Inácio Moreira, recently purchased a computer with the version oem
Microsoft windows home premium x64 PT.
I have tried to set up a network Wifi safe for Internet access but without
success.
The system is composed of:

Motherboard - Asus P5K3 Deluxe / WiFi-AP with a Realtek RTL8187 Wireless
802.11g 54Mbps USB 2.0 Network Adapter onboard
- Processor P4 Quad Core 2.4 ghz
-2 Gb memory ddr3 1066 mhz


The wireless network has the following characteristics:

Type of security-> WPA-Enterprise
Type encriptaÇãO-> TKIP
Authentication method of the network-> Protected EAP (PEAP)

Description of the error (after clicking definitions):

"Windows detected an error to keep the properties of EAP.
Specific Error: Unable to locate the module specified. "

Or using SecureW2 TTLS Client

The wireless network has the following characteristics:

Type of security-> WPA-Enterprise
Type encriptaÇãO-> TKIP
Authentication method of the network-> SecureW2 TTLS

Description of the error (after clicking definitions):

"Windows detected an error to keep the properties of EAP.
Specific error: Error not specified.

In seeking the registration of events found these errors:

Event 20063, RasMan

Unable to start the Manager of Remote Access link because it was not
possible to boot
Protocol PPP (Point to Point Protocol). Unable to locate the module
specified.

***

Event 20070, RemoteAccess

The engine of PPP (Point to Point Protocol) failed to load the module C: \
Windows \ System32
\ Sw2_ttls.dll. Unable to locate the module specified.

***

Event 20151, RemoteAccess

The Protocol of Control in the EAP module of the protocol PPP (Point to
Point Protocol) C: \ Windows
\ System32 \ rasppp.dll returned an error during boot. Unable to locate the
module
Specified.

Attitudes taken:

-> Installed is all updates available on the Microsoft download center. ->
Had no effect.

-> The drivers of the network card were updated using the latest pack of
drivers from Asus and
Realtek. -> Had no effect.

-> Attempts have to register the following modules, sw2_ttls.dll,
rasppp.dll, rasman.dll. -> Had no effect.

Without another matter and awaiting a response

Inácio Moreira
Reply With Quote

Responses to "set up a network Wifi safe"

Barb Bowman
Guest
Posts: n/a
 
Re: set up a network Wifi safe
Posted: 12-18-2007, 11:17 AM
unlikely you would use PEAP on a home network.
you do not mention what router/access point/device you are
connecting to.

use WPA2-Personal or WPA-Personal unless you are in a
business/enterprise environment. (in which case you would not want
to use Vista Home Premium).

please post more details.

On Mon, 17 Dec 2007 15:34:07 -0800, InácioMor
<IncioMor@discussions.microsoft.com> wrote:
>My name is Inácio Moreira, recently purchased a computer with the version oem
>Microsoft windows home premium x64 PT.
>I have tried to set up a network Wifi safe for Internet access but without
>success.
>The system is composed of:
>
>Motherboard - Asus P5K3 Deluxe / WiFi-AP with a Realtek RTL8187 Wireless
>802.11g 54Mbps USB 2.0 Network Adapter onboard
>- Processor P4 Quad Core 2.4 ghz
>-2 Gb memory ddr3 1066 mhz
>
>
>The wireless network has the following characteristics:
>
>Type of security-> WPA-Enterprise
>Type encriptaÇãO-> TKIP
>Authentication method of the network-> Protected EAP (PEAP)
>
>Description of the error (after clicking definitions):
>
>"Windows detected an error to keep the properties of EAP.
>Specific Error: Unable to locate the module specified. "
>
>Or using SecureW2 TTLS Client
>
>The wireless network has the following characteristics:
>
>Type of security-> WPA-Enterprise
>Type encriptaÇãO-> TKIP
>Authentication method of the network-> SecureW2 TTLS
>
>Description of the error (after clicking definitions):
>
>"Windows detected an error to keep the properties of EAP.
>Specific error: Error not specified.
>
>In seeking the registration of events found these errors:
>
>Event 20063, RasMan
>
>Unable to start the Manager of Remote Access link because it was not
>possible to boot
>Protocol PPP (Point to Point Protocol). Unable to locate the module
>specified.
>
>***
>
>Event 20070, RemoteAccess
>
>The engine of PPP (Point to Point Protocol) failed to load the module C: \
>Windows \ System32
>\ Sw2_ttls.dll. Unable to locate the module specified.
>
>***
>
>Event 20151, RemoteAccess
>
>The Protocol of Control in the EAP module of the protocol PPP (Point to
>Point Protocol) C: \ Windows
>\ System32 \ rasppp.dll returned an error during boot. Unable to locate the
>module
>Specified.
>
>Attitudes taken:
>
>-> Installed is all updates available on the Microsoft download center. ->
>Had no effect.
>
>-> The drivers of the network card were updated using the latest pack of
>drivers from Asus and
>Realtek. -> Had no effect.
>
>-> Attempts have to register the following modules, sw2_ttls.dll,
>rasppp.dll, rasman.dll. -> Had no effect.
>
>Without another matter and awaiting a response
>
>Inácio Moreira
--

Barb Bowman
MS Windows-MVP
http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
Reply With Quote
 
LinkBack Thread Tools Display Modes
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to configure internet by WIFI and local network by cable ethernet newsbirdie2@hotmail.com Windows Vista Networking & Sharing 5 12-02-2007 03:54 AM
WiFi, Samsung Network scan, unable to connect olaveng Windows Vista Networking & Sharing 0 11-26-2007 01:34 PM
Wifi lag Frits Windows Vista Networking & Sharing 3 08-03-2007 06:24 PM
WiFi and WEP jsanders Windows Vista Networking & Sharing 0 06-20-2006 10:27 PM
Fax thru wifi ian Windows XP Printers / Scanners / Fax 3 09-25-2003 10:01 AM