Real Geek Forums > Archives > Operating Systems > Windows XP > Windows XP Embedded > Setting up New Group called Remote Control Operators

Setting up New Group called Remote Control Operators

Posted: 11-12-2003, 04:15 PM
Paul Tyler
Guest
Posts: n/a
 
Hello All

We have an image and we need to add an App called LAN Desk which is used to
manage all the terminals in the Network. The remote site has managed to
install LAN Desk fine but a local Group called Remote Control Operators
needs to be setup. So far they have not been able to do that. The person who
is building our XPe says it is not possible, however I firmly believe
anything is possible so I have come to the font all knowledge XPe to see if
this is possible and if it is something we need to do when the image is
being built in TD. If this is the case what do we need to do to set up the
Remote Control Operators Group.

Cheers and Ta in advance!

--
Paul Tyler
Athena USA
6524 Walker Street
Suite 230
Saint Louis Park, MN 55426
952-876-0428
952-883-0065 FAX


Reply With Quote

Responses to "Setting up New Group called Remote Control Operators"

Zirong Wang
Guest
Posts: n/a
 
Re: Setting up New Group called Remote Control Operators
Posted: 11-12-2003, 04:26 PM
I guess that you should tell the person to play with
the command 'net group'


Paul Tyler wrote:
> Hello All
>
> We have an image and we need to add an App called LAN Desk which is used to
> manage all the terminals in the Network. The remote site has managed to
> install LAN Desk fine but a local Group called Remote Control Operators
> needs to be setup. So far they have not been able to do that. The person who
> is building our XPe says it is not possible, however I firmly believe
> anything is possible so I have come to the font all knowledge XPe to see if
> this is possible and if it is something we need to do when the image is
> being built in TD. If this is the case what do we need to do to set up the
> Remote Control Operators Group.
>
> Cheers and Ta in advance!
>
Reply With Quote
Paul Tyler
Guest
Posts: n/a
 
Re: Setting up New Group called Remote Control Operators
Posted: 11-12-2003, 05:06 PM
Hello Zirong

So they could use NET GROUP "Remote Control Operators" /add? and this should
add a group to the XPe image?

Cheers

--
Paul Tyler
Athena USA
6524 Walker Street
Suite 230
Saint Louis Park, MN 55426
952-876-0428
952-883-0065 FAX
"Zirong Wang" <nospam@blackhole.net> wrote in message
news:3FB25F38.9050802@blackhole.net...
> I guess that you should tell the person to play with
> the command 'net group'
>
>
> Paul Tyler wrote:
> > Hello All
> >
> > We have an image and we need to add an App called LAN Desk which is used
to
> > manage all the terminals in the Network. The remote site has managed to
> > install LAN Desk fine but a local Group called Remote Control Operators
> > needs to be setup. So far they have not been able to do that. The person
who
> > is building our XPe says it is not possible, however I firmly believe
> > anything is possible so I have come to the font all knowledge XPe to see
if
> > this is possible and if it is something we need to do when the image is
> > being built in TD. If this is the case what do we need to do to set up
the
> > Remote Control Operators Group.
> >
> > Cheers and Ta in advance!
> >
>

Reply With Quote
Howard Smith
Guest
Posts: n/a
 
Setting up New Group called Remote Control Operators
Posted: 11-12-2003, 07:31 PM
Create image, with fba phase set to 0 (so it doesnt seal
after first boot).

Add your local group using users/groups. When finished
run fbreseal and clone.

Howard
>-----Original Message-----
>Hello All
>
>We have an image and we need to add an App called LAN
Desk which is used to
>manage all the terminals in the Network. The remote site
has managed to
>install LAN Desk fine but a local Group called Remote
Control Operators
>needs to be setup. So far they have not been able to do
that. The person who
>is building our XPe says it is not possible, however I
firmly believe
>anything is possible so I have come to the font all
knowledge XPe to see if
>this is possible and if it is something we need to do
when the image is
>being built in TD. If this is the case what do we need
to do to set up the
>Remote Control Operators Group.
>
>Cheers and Ta in advance!
>
>--
>Paul Tyler
>Athena USA
>6524 Walker Street
>Suite 230
>Saint Louis Park, MN 55426
>952-876-0428
>952-883-0065 FAX
>
>
>.
>
Reply With Quote
Howard Smith
Guest
Posts: n/a
 
Re: Setting up New Group called Remote Control Operators
Posted: 11-12-2003, 07:51 PM
I believe net group can only be used on a domain
controller

Howard
>-----Original Message-----
>Hello Zirong
>
>So they could use NET GROUP "Remote Control
Operators" /add? and this should
>add a group to the XPe image?
>
>Cheers
>
>--
>Paul Tyler
>Athena USA
>6524 Walker Street
>Suite 230
>Saint Louis Park, MN 55426
>952-876-0428
>952-883-0065 FAX
>"Zirong Wang" <nospam@blackhole.net> wrote in message
>news:3FB25F38.9050802@blackhole.net...
>> I guess that you should tell the person to play with
>> the command 'net group'
>>
>>
>> Paul Tyler wrote:
>> > Hello All
>> >
>> > We have an image and we need to add an App called
LAN Desk which is used
>to
>> > manage all the terminals in the Network. The remote
site has managed to
>> > install LAN Desk fine but a local Group called
Remote Control Operators
>> > needs to be setup. So far they have not been able to
do that. The person
>who
>> > is building our XPe says it is not possible, however
I firmly believe
>> > anything is possible so I have come to the font all
knowledge XPe to see
>if
>> > this is possible and if it is something we need to
do when the image is
>> > being built in TD. If this is the case what do we
need to do to set up
>the
>> > Remote Control Operators Group.
>> >
>> > Cheers and Ta in advance!
>> >
>>
>
>
>.
>
Reply With Quote
Guest
Posts: n/a
 
Re: Setting up New Group called Remote Control Operators
Posted: 11-12-2003, 07:53 PM
Rather than 'net group' use 'net localgroup "wwww" /add'

This should work

Howard
>-----Original Message-----
>Hello Zirong
>
>So they could use NET GROUP "Remote Control
Operators" /add? and this should
>add a group to the XPe image?
>
>Cheers
>
>--
>Paul Tyler
>Athena USA
>6524 Walker Street
>Suite 230
>Saint Louis Park, MN 55426
>952-876-0428
>952-883-0065 FAX
>"Zirong Wang" <nospam@blackhole.net> wrote in message
>news:3FB25F38.9050802@blackhole.net...
>> I guess that you should tell the person to play with
>> the command 'net group'
>>
>>
>> Paul Tyler wrote:
>> > Hello All
>> >
>> > We have an image and we need to add an App called
LAN Desk which is used
>to
>> > manage all the terminals in the Network. The remote
site has managed to
>> > install LAN Desk fine but a local Group called
Remote Control Operators
>> > needs to be setup. So far they have not been able to
do that. The person
>who
>> > is building our XPe says it is not possible, however
I firmly believe
>> > anything is possible so I have come to the font all
knowledge XPe to see
>if
>> > this is possible and if it is something we need to
do when the image is
>> > being built in TD. If this is the case what do we
need to do to set up
>the
>> > Remote Control Operators Group.
>> >
>> > Cheers and Ta in advance!
>> >
>>
>
>
>.
>
Reply With Quote
Paul Tyler
Guest
Posts: n/a
 
Re: Setting up New Group called Remote Control Operators
Posted: 11-12-2003, 09:15 PM
Just to clarify, after FBA set to O, do we then do the net command 'net
localgroup "wwww" /add'? the reseal the image?

Cheers

--
Paul Tyler
Athena USA
6524 Walker Street
Suite 230
Saint Louis Park, MN 55426
952-876-0428
952-883-0065 FAX
"Howard Smith" <anonymous@discussions.microsoft.com> wrote in message
news:01fa01c3a953$89a0c3a0$a401280a@phx.gbl...
> Create image, with fba phase set to 0 (so it doesnt seal
> after first boot).
>
> Add your local group using users/groups. When finished
> run fbreseal and clone.
>
> Howard
> >-----Original Message-----
> >Hello All
> >
> >We have an image and we need to add an App called LAN
> Desk which is used to
> >manage all the terminals in the Network. The remote site
> has managed to
> >install LAN Desk fine but a local Group called Remote
> Control Operators
> >needs to be setup. So far they have not been able to do
> that. The person who
> >is building our XPe says it is not possible, however I
> firmly believe
> >anything is possible so I have come to the font all
> knowledge XPe to see if
> >this is possible and if it is something we need to do
> when the image is
> >being built in TD. If this is the case what do we need
> to do to set up the
> >Remote Control Operators Group.
> >
> >Cheers and Ta in advance!
> >
> >--
> >Paul Tyler
> >Athena USA
> >6524 Walker Street
> >Suite 230
> >Saint Louis Park, MN 55426
> >952-876-0428
> >952-883-0065 FAX
> >
> >
> >.
> >

Reply With Quote
Paul Tyler
Guest
Posts: n/a
 
Re: Setting up New Group called Remote Control Operators
Posted: 11-12-2003, 09:31 PM
I was reading into that, and yes you seem to be correct but it also looks
like if you do not have the /domain in the command then the group will be
set up on local workstation, or at least that is what my info said.

Cheers

--
Paul Tyler
Athena USA
6524 Walker Street
Suite 230
Saint Louis Park, MN 55426
952-876-0428
952-883-0065 FAX
"Howard Smith" <anonymous@discussions.microsoft.com> wrote in message
news:0a2e01c3a956$5049c7c0$a001280a@phx.gbl...
> I believe net group can only be used on a domain
> controller
>
> Howard
> >-----Original Message-----
> >Hello Zirong
> >
> >So they could use NET GROUP "Remote Control
> Operators" /add? and this should
> >add a group to the XPe image?
> >
> >Cheers
> >
> >--
> >Paul Tyler
> >Athena USA
> >6524 Walker Street
> >Suite 230
> >Saint Louis Park, MN 55426
> >952-876-0428
> >952-883-0065 FAX
> >"Zirong Wang" <nospam@blackhole.net> wrote in message
> >news:3FB25F38.9050802@blackhole.net...
> >> I guess that you should tell the person to play with
> >> the command 'net group'
> >>
> >>
> >> Paul Tyler wrote:
> >> > Hello All
> >> >
> >> > We have an image and we need to add an App called
> LAN Desk which is used
> >to
> >> > manage all the terminals in the Network. The remote
> site has managed to
> >> > install LAN Desk fine but a local Group called
> Remote Control Operators
> >> > needs to be setup. So far they have not been able to
> do that. The person
> >who
> >> > is building our XPe says it is not possible, however
> I firmly believe
> >> > anything is possible so I have come to the font all
> knowledge XPe to see
> >if
> >> > this is possible and if it is something we need to
> do when the image is
> >> > being built in TD. If this is the case what do we
> need to do to set up
> >the
> >> > Remote Control Operators Group.
> >> >
> >> > Cheers and Ta in advance!
> >> >
> >>
> >
> >
> >.
> >

Reply With Quote
 
LinkBack Thread Tools Display Modes
Reply

« Embedded XP Thin Client | component that needed to support mdb file extension »

Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to control "Network Discovery" with Group Policies? Robert Fischer Windows Vista Networking & Sharing 8 01-16-2007 06:47 PM
Setting of Group Policy in WinXP Pro welkin Windows XP Configuration & Management 1 10-26-2004 05:21 PM
Remote Control chris Windows XP Help & Support 0 10-15-2003 01:15 AM
remote control G Windows XP Work Remotely 1 09-23-2003 04:04 AM
BindAdapterHandler for WDM/ NDIS protocol driver not called QuasiCodo Windows XP Device Drivers 2 09-22-2003 10:18 PM


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90