slow booting with a Lexmark P707

> I'd suggest that you take the printer back. Life is too short and printers
> too inexpensive to fool with.
> Besides, a lot of returns forces the mfr to fix the problem.
> "Jaime Raz" <jraz@netvision.net.il> wrote in message
> news:38146c3c.0406081000.55472305@posting.google.c om...

>> I has just purchased a Lexmark P707 and the PC (Windows XP) boots
>> very slowly, the "Intel" logo stays for a few minutes, then waits with
>> a black screen. All this when it is plugged in via the USB port. If I
>> disconnect the printer form the USB cord the PC boots up starait
>> forward, and I can then connect the printer and it works This can be
>> done even before it finished the start up process. My previous
>> printer, a Lex Z53 worked OK irrespective of whether it is plugged in
>> before or after the PC has booted up.
>>

>> >Has anyone got any ideas or suggestions?

>
>

> [b]It's starting the connection to the scanner unit. Just sit and
> wait. The
> slower the CPU, the slower the bootup will be.
>
> I have the same problem with a customers P707.....can take up to 25
> minutes to boot into windows....surley you shouldnt have to wait that
> long.

>
> Cari \(MS-MVP\) wrote:

>> [b]It's starting the connection to the scanner unit. Just sit and
>> wait. The
>> slower the CPU, the slower the bootup will be.
>>
>> I have the same problem with a customers P707.....can take up to 25
>> minutes to boot into windows....surley you shouldnt have to wait that
>> long.

>
>
>
> --
> andcorp
> ------------------------------------------------------------------------
> Posted via http://www.mcse.ms
> ------------------------------------------------------------------------
> View this thread: http://www.mcse.ms/message746388.html
>