Star Force Protection

I'm running the 32bit vista version.
I read on extremetech.com that they could not get around this issue.

MySpecs
asus pc800 deluxe MB
Intel P4 HT 800FSB 2.4Ghz
Corsair XMS 2Gig
ATI x700 256mb
Raptor 10,000 rpm HD

"Graham Wilmott" wrote:

> Are you running on 64-bit or 32-bit?
>
> If 64-bit, you may need to disable the check for signed drivers before the
> star force driver can run...
>
> --
>
> "vampyre~" <vampyre~@discussions.microsoft.com> wrote in message
> news:8C5D552A-25C2-497F-8E93-C85164EEE431@microsoft.com...

> >I can't get any of my games that use the star-force disc protection to
> >play.
> > After the game is installed you have to reboot your pc to finish the
> > installation of the starforce driver. When vista loads you get a screen
> > saying that vista could not load the driver. You get the same message
> > when
> > trying to start the game.
> >
> > Any work arounds for this yet?
> >
> > Games I have that use star force:
> > GT Legends
> > Lock On

>
>
>

It is a known issue with StarForce and Vista. This is an excerpt from the
ExtremeTech report: Will Vista run your games?

Splinter Cell: Chaos Theory
The latest stealth action thriller from Ubisoft doesn't work in Vista, but
it's probably not any fault of the application itself – it's the StarForce
copy protection. StarForce installs a low-level (ring 0) driver to access
your optical drive, and this driver has not been Vista certified. So
Splinter Cell: Chaos Theory asks you to reboot after installing, which you
do, and then upon reboot Vista informs you that it won't load the driver due
to "compatibility problems." The 32-bit version of Vista will allow unsigned
kernel-level drivers if installed from an account with admin privileges --
as ours was. We were unable to find any sort of workaround or Vista-ready
driver on the StarForce site.

What's worse, the StarForce driver will try (and fail) to load every time
you reboot, even if you uninstall the game, and the removal tool doesn't
work properly by default. It doesn't give you any indication that it didn't
work, however. You have to run it as an administrator by accessing the
Compatibility tab in the removal tool's Properties menu. Visually, it looks
like it's doing the same thing as when you don't run it as an admin, but it
will at least get StarForce off your system.

"vampyre~" <vampyre~@discussions.microsoft.com> wrote in message
news:8C5D552A-25C2-497F-8E93-C85164EEE431@microsoft.com...

>I can't get any of my games that use the star-force disc protection to
>play.
> After the game is installed you have to reboot your pc to finish the
> installation of the starforce driver. When vista loads you get a screen
> saying that vista could not load the driver. You get the same message
> when
> trying to start the game.
>
> Any work arounds for this yet?
>
> Games I have that use star force:
> GT Legends
> Lock On

After more digging I might have found a
STAR FORCE FIX!!!
http://www.star-force.com/forum/index.php?showtopic=320

StarForce has released a fix for vista gamers. I will be trying this later
as I am not home now. Good luck everyone.

"Zack Uribe" wrote:

> It is a known issue with StarForce and Vista. This is an excerpt from the
> ExtremeTech report: Will Vista run your games?
>
> Splinter Cell: Chaos Theory
> The latest stealth action thriller from Ubisoft doesn't work in Vista, but
> it's probably not any fault of the application itself – it's the StarForce
> copy protection. StarForce installs a low-level (ring 0) driver to access
> your optical drive, and this driver has not been Vista certified. So
> Splinter Cell: Chaos Theory asks you to reboot after installing, which you
> do, and then upon reboot Vista informs you that it won't load the driver due
> to "compatibility problems." The 32-bit version of Vista will allow unsigned
> kernel-level drivers if installed from an account with admin privileges --
> as ours was. We were unable to find any sort of workaround or Vista-ready
> driver on the StarForce site.
>
> What's worse, the StarForce driver will try (and fail) to load every time
> you reboot, even if you uninstall the game, and the removal tool doesn't
> work properly by default. It doesn't give you any indication that it didn't
> work, however. You have to run it as an administrator by accessing the
> Compatibility tab in the removal tool's Properties menu. Visually, it looks
> like it's doing the same thing as when you don't run it as an admin, but it
> will at least get StarForce off your system.
>
> "vampyre~" <vampyre~@discussions.microsoft.com> wrote in message
> news:8C5D552A-25C2-497F-8E93-C85164EEE431@microsoft.com...

> >I can't get any of my games that use the star-force disc protection to
> >play.
> > After the game is installed you have to reboot your pc to finish the
> > installation of the starforce driver. When vista loads you get a screen
> > saying that vista could not load the driver. You get the same message
> > when
> > trying to start the game.
> >
> > Any work arounds for this yet?
> >
> > Games I have that use star force:
> > GT Legends
> > Lock On

>

Update On the StarForce Patch.

After installing the patch for starforce's website I was able to boot up
vista and the starforce driver without any problems. BUT, when I try to
launch a starforce application my system freezes.

I've tried running the app as xp compatible, run as admin, nothing seems to
work. It always freezes the computer requiring a cold boot. So as for now
starforce is a vista no-no it seems.

Anyone got SF games to run yet?

"vampyre~" wrote:

> After more digging I might have found a
> STAR FORCE FIX!!!
> http://www.star-force.com/forum/index.php?showtopic=320
>
> StarForce has released a fix for vista gamers. I will be trying this later
> as I am not home now. Good luck everyone.
>
> "Zack Uribe" wrote:
>

> > It is a known issue with StarForce and Vista. This is an excerpt from the
> > ExtremeTech report: Will Vista run your games?
> >
> > Splinter Cell: Chaos Theory
> > The latest stealth action thriller from Ubisoft doesn't work in Vista, but
> > it's probably not any fault of the application itself – it's the StarForce
> > copy protection. StarForce installs a low-level (ring 0) driver to access
> > your optical drive, and this driver has not been Vista certified. So
> > Splinter Cell: Chaos Theory asks you to reboot after installing, which you
> > do, and then upon reboot Vista informs you that it won't load the driver due
> > to "compatibility problems." The 32-bit version of Vista will allow unsigned
> > kernel-level drivers if installed from an account with admin privileges --
> > as ours was. We were unable to find any sort of workaround or Vista-ready
> > driver on the StarForce site.
> >
> > What's worse, the StarForce driver will try (and fail) to load every time
> > you reboot, even if you uninstall the game, and the removal tool doesn't
> > work properly by default. It doesn't give you any indication that it didn't
> > work, however. You have to run it as an administrator by accessing the
> > Compatibility tab in the removal tool's Properties menu. Visually, it looks
> > like it's doing the same thing as when you don't run it as an admin, but it
> > will at least get StarForce off your system.
> >
> > "vampyre~" <vampyre~@discussions.microsoft.com> wrote in message
> > news:8C5D552A-25C2-497F-8E93-C85164EEE431@microsoft.com...

> > >I can't get any of my games that use the star-force disc protection to
> > >play.
> > > After the game is installed you have to reboot your pc to finish the
> > > installation of the starforce driver. When vista loads you get a screen
> > > saying that vista could not load the driver. You get the same message
> > > when
> > > trying to start the game.
> > >
> > > Any work arounds for this yet?
> > >
> > > Games I have that use star force:
> > > GT Legends
> > > Lock On

> >

I downloaded the patch from StarForce and installed it. It works. I can
play Lock-On, and Splinter Cell: Chaos Theory.

I am using P4 820 "D" 2.0 GB RAM, ATI X850XT, Benq DVD-RW "Lightscribe", and
other hardware.

"vampyre~" wrote:

> Update On the StarForce Patch.
>
> After installing the patch for starforce's website I was able to boot up
> vista and the starforce driver without any problems. BUT, when I try to
> launch a starforce application my system freezes.
>
> I've tried running the app as xp compatible, run as admin, nothing seems to
> work. It always freezes the computer requiring a cold boot. So as for now
> starforce is a vista no-no it seems.
>
> Anyone got SF games to run yet?
>
> "vampyre~" wrote:
>

> > After more digging I might have found a
> > STAR FORCE FIX!!!
> > http://www.star-force.com/forum/index.php?showtopic=320
> >
> > StarForce has released a fix for vista gamers. I will be trying this later
> > as I am not home now. Good luck everyone.
> >
> > "Zack Uribe" wrote:
> >

> > > It is a known issue with StarForce and Vista. This is an excerpt from the
> > > ExtremeTech report: Will Vista run your games?
> > >
> > > Splinter Cell: Chaos Theory
> > > The latest stealth action thriller from Ubisoft doesn't work in Vista, but
> > > it's probably not any fault of the application itself – it's the StarForce
> > > copy protection. StarForce installs a low-level (ring 0) driver to access
> > > your optical drive, and this driver has not been Vista certified. So
> > > Splinter Cell: Chaos Theory asks you to reboot after installing, which you
> > > do, and then upon reboot Vista informs you that it won't load the driver due
> > > to "compatibility problems." The 32-bit version of Vista will allow unsigned
> > > kernel-level drivers if installed from an account with admin privileges --
> > > as ours was. We were unable to find any sort of workaround or Vista-ready
> > > driver on the StarForce site.
> > >
> > > What's worse, the StarForce driver will try (and fail) to load every time
> > > you reboot, even if you uninstall the game, and the removal tool doesn't
> > > work properly by default. It doesn't give you any indication that it didn't
> > > work, however. You have to run it as an administrator by accessing the
> > > Compatibility tab in the removal tool's Properties menu. Visually, it looks
> > > like it's doing the same thing as when you don't run it as an admin, but it
> > > will at least get StarForce off your system.
> > >
> > > "vampyre~" <vampyre~@discussions.microsoft.com> wrote in message
> > > news:8C5D552A-25C2-497F-8E93-C85164EEE431@microsoft.com...
> > > >I can't get any of my games that use the star-force disc protection to
> > > >play.
> > > > After the game is installed you have to reboot your pc to finish the
> > > > installation of the starforce driver. When vista loads you get a screen
> > > > saying that vista could not load the driver. You get the same message
> > > > when
> > > > trying to start the game.
> > > >
> > > > Any work arounds for this yet?
> > > >
> > > > Games I have that use star force:
> > > > GT Legends
> > > > Lock On
> > >

im having the same problems, i am trying to install the game prince o
persia the two thrones. and i can't run it because starforce i
incompatible with my computer.

i checked the link you gave out but when i clicked it an error (404
HTML not found) occured. can someone help me please

--
lemon
-----------------------------------------------------------------------
lemons's Profile: http://forums.techarena.in/members/lemons.ht
View this thread: http://forums.techarena.in/windows-v...ames/529347.ht

http://forums.techarena.i