TEAC FD505 Dual Floppy Drive.

I have a TEAC FD-505 dual floppy drive that contains both
a 3.5" slot and a 5.25" slot... I was unclear as to
whether or not windows supports this device, so I checked
the windows HCL and didn't find it there. Albeit it is a
very old legacy device, I still believe there should be a
way to get it working. It only uses one fdd cable
connection which I have going from it the motherboard,
but it chains that connection internall so it's really
more like you're just connecting two floppy drives to one
cable. The motherboard manufacturer I contacted (MSI)
said that more than one floppy drive was definately
supported.
The problem I have is that when I go to use the floppy
drive, windows acts as though it doesn't have device
drivers to utilize the drives. The drive has the green
light on so I know it's getting power, and I know the
cable is good from testing a newer 3.5" drive. Is there
any way to use other floppy disk controllers other than
the standard ones that are always installed for a floppy
drive in xp?

Please reply if possible, thanks.
-mike