> I've added the Date/Time Control Panel and the applet works fine, but whenI
> reboot, the time zone is set back to GMT. As long as I never reboot, theis
> time zone is OK. The applet shows it correct. But, the registry
> information at HKLM\System\CurrentControlSet\Control\TimeZoneInfo rmation
> never updated.
>
> What am I missing?
>
> --
> Regards.
> Mark K Vallevand
>
>
> Do you have EWF enabled by chance?when
>
> "Mark K Vallevand" <markus AT rsvl DOT unisys DOT com> wrote in message
> news:e3xoEhlnDHA.2848@TK2MSFTNGP10.phx.gbl...> > I've added the Date/Time Control Panel and the applet works fine, but
> Ithe> > reboot, the time zone is set back to GMT. As long as I never reboot,
> > time zone is OK. The applet shows it correct. But, the registry> is
> > information at HKLM\System\CurrentControlSet\Control\TimeZoneInfo rmation> > never updated.>
> >
> > What am I missing?
> >
> > --
> > Regards.
> > Mark K Vallevand
> >
> >
>
> I have EWF in the image, but not enabled yet.setup
>
> I don't enable it until FBA is done, and after a couple of sessions to
> things and install some applications. In fact, one of the two embeddedmessage
> releases I make runs with it disabled all the time.
>
> It behaves the same if EWF is disabled or enabled.
>
> --
> Regards.
> Mark K Vallevand
>
> "Doug Hoeffel (eMVP)" <doug.hoeffelNo@SpAmMcamtronics.com> wrote in
> news:u$oUCjlnDHA.2808@TK2MSFTNGP10.phx.gbl...HKLM\System\CurrentControlSet\Control\TimeZoneInfo rmation> > Do you have EWF enabled by chance?> when
> >
> > "Mark K Vallevand" <markus AT rsvl DOT unisys DOT com> wrote in message
> > news:e3xoEhlnDHA.2848@TK2MSFTNGP10.phx.gbl...> > > I've added the Date/Time Control Panel and the applet works fine, but> > I> the> > > reboot, the time zone is set back to GMT. As long as I never reboot,> > > time zone is OK. The applet shows it correct. But, the registry
> > > information at
> > is>> > > never updated.> >
> > >
> > > What am I missing?
> > >
> > > --
> > > Regards.
> > > Mark K Vallevand
> > >
> > >
> >
>
> Do you have EWF enabled by chance?when
>
> "Mark K Vallevand" <markus AT rsvl DOT unisys DOT com> wrote in message
> news:e3xoEhlnDHA.2848@TK2MSFTNGP10.phx.gbl...> > I've added the Date/Time Control Panel and the applet works fine, but
> Ithe> > reboot, the time zone is set back to GMT. As long as I never reboot,
> > time zone is OK. The applet shows it correct. But, the registry> is
> > information at HKLM\System\CurrentControlSet\Control\TimeZoneInfo rmation> > never updated.>
> >
> > What am I missing?
> >
> > --
> > Regards.
> > Mark K Vallevand
> >
> >
>
> I have EWF in the image, but not enabled yet.setup
>
> I don't enable it until FBA is done, and after a couple of sessions to
> things and install some applications. In fact, one of the two embeddedmessage
> releases I make runs with it disabled all the time.
>
> It behaves the same if EWF is disabled or enabled.
>
>
> --
> Regards.
> Mark K Vallevand
>
>
> "Doug Hoeffel (eMVP)" <doug.hoeffelNo@SpAmMcamtronics.com> wrote in
> news:u$oUCjlnDHA.2808@TK2MSFTNGP10.phx.gbl...HKLM\System\CurrentControlSet\Control\TimeZoneInfo rmation> > Do you have EWF enabled by chance?> when
> >
> > "Mark K Vallevand" <markus AT rsvl DOT unisys DOT com> wrote in message
> > news:e3xoEhlnDHA.2848@TK2MSFTNGP10.phx.gbl...> > > I've added the Date/Time Control Panel and the applet works fine, but> > I> the> > > reboot, the time zone is set back to GMT. As long as I never reboot,> > > time zone is OK. The applet shows it correct. But, the registry
> > > information at
> > is>> > > never updated.> >
> > >
> > > What am I missing?
> > >
> > > --
> > > Regards.
> > > Mark K Vallevand
> > >
> > >
> >
>
> Why again same post?message
> Have you seen my reply from yesterday?
>
> Regards,
> Slobodan
>
> "Mark K Vallevand" <markus AT rsvl DOT unisys DOT com> wrote in message
> news:OItwq7unDHA.2628@TK2MSFTNGP10.phx.gbl...> > I have EWF in the image, but not enabled yet.> setup
> >
> > I don't enable it until FBA is done, and after a couple of sessions to> > things and install some applications. In fact, one of the two embedded> message
> > releases I make runs with it disabled all the time.
> >
> > It behaves the same if EWF is disabled or enabled.
> >
> >
> > --
> > Regards.
> > Mark K Vallevand
> >
> >
> > "Doug Hoeffel (eMVP)" <doug.hoeffelNo@SpAmMcamtronics.com> wrote in> > news:u$oUCjlnDHA.2808@TK2MSFTNGP10.phx.gbl...> > > Do you have EWF enabled by chance?
> > >
> > > "Mark K Vallevand" <markus AT rsvl DOT unisys DOT com> wrote in
but> > > news:e3xoEhlnDHA.2848@TK2MSFTNGP10.phx.gbl...
> > > > I've added the Date/Time Control Panel and the applet works fine,
reboot,> > when> > > I
> > > > reboot, the time zone is set back to GMT. As long as I never
> > the> HKLM\System\CurrentControlSet\Control\TimeZoneInfo rmation> > > > time zone is OK. The applet shows it correct. But, the registry
> > > > information at>> > > is> >
> > > > never updated.
> > > >
> > > > What am I missing?
> > > >
> > > > --
> > > > Regards.
> > > > Mark K Vallevand
> > > >
> > > >
> > >
> > >
> >
>
> My network connection was wonky yesterday. So, some stuff got sent twice.another
> And, I haven't seen your reply in this newsreader. I just looked in
> reader. To answer your questions.a
>
> ---
> http://www.microsoft.com/windows/emb...p/timezone.asp
> Can you use it?
> ---
> Yes, I've seen it. In fact, I already had this solution in hand. I have
> component that has the registry settings to put the image into the GMTto
> timezone, which was my requirement. Requirements change, and now I need
> allow the configuration of any timezone.embedded
>
> ---
> Also check in registry with regedit if value is updated before you reboot.
> ---
> No. The registry is not updated after the date/time control panel app is
> used. But, the timezone setting remains correct in the control panel app
> until I reboot. The registry never changes in
> HKLM\System\CurrentControlSet\Control\TimeZoneInfo rmation. I wonder where
> the control panel app keeps the timezone setting?
>
> --
> Regards.
> Mark K Vallevand
>
> "Slobodan Brcin" <sbrcin@ptt.yu> wrote in message
> news:%23sMgeIvnDHA.744@tk2msftngp13.phx.gbl...> > Why again same post?
> > Have you seen my reply from yesterday?
> >
> > Regards,
> > Slobodan
> >
> > "Mark K Vallevand" <markus AT rsvl DOT unisys DOT com> wrote in message
> > news:OItwq7unDHA.2628@TK2MSFTNGP10.phx.gbl...> > > I have EWF in the image, but not enabled yet.> > setup
> > >
> > > I don't enable it until FBA is done, and after a couple of sessions to> > > things and install some applications. In fact, one of the two
> message> > > releases I make runs with it disabled all the time.> > message
> > >
> > > It behaves the same if EWF is disabled or enabled.
> > >
> > >
> > > --
> > > Regards.
> > > Mark K Vallevand
> > >
> > >
> > > "Doug Hoeffel (eMVP)" <doug.hoeffelNo@SpAmMcamtronics.com> wrote in> > > news:u$oUCjlnDHA.2808@TK2MSFTNGP10.phx.gbl...
> > > > Do you have EWF enabled by chance?
> > > >
> > > > "Mark K Vallevand" <markus AT rsvl DOT unisys DOT com> wrote in> but> > > > news:e3xoEhlnDHA.2848@TK2MSFTNGP10.phx.gbl...
> > > > > I've added the Date/Time Control Panel and the applet works fine,> reboot,> > > when
> > > > I
> > > > > reboot, the time zone is set back to GMT. As long as I never>> > > the> > HKLM\System\CurrentControlSet\Control\TimeZoneInfo rmation
> > > > > time zone is OK. The applet shows it correct. But, the registry
> > > > > information at> > > > is> >
> > > > > never updated.
> > > > >
> > > > > What am I missing?
> > > > >
> > > > > --
> > > > > Regards.
> > > > > Mark K Vallevand
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
>
> I've got more info...registry
> The date/time conptrol panel app is the same as XP Pro. So there isn't a
> different version in XPe.
> I can't see anything using regmon. It certainly never updates the
> with time zone information.twice.
>
> I'm guessing that there is some missing component in my image. Some
> security thing?
>
> Does this work for anyone? Can you set the timezone?
>
> I'm getting close to panic mode.
>
> --
> Regards.
> Mark K Vallevand
>
>
> "Mark K Vallevand" <markus AT rsvl DOT unisys DOT com> wrote in message
> news:uCCPubvnDHA.3304@tk2msftngp13.phx.gbl...> > My network connection was wonky yesterday. So, some stuff got sent
have> > And, I haven't seen your reply in this newsreader. I just looked in> another> > reader. To answer your questions.
> >
> > ---
> > http://www.microsoft.com/windows/emb...p/timezone.asp
> > Can you use it?
> > ---
> > Yes, I've seen it. In fact, I already had this solution in hand. I
> areboot.> > component that has the registry settings to put the image into the GMT> to
> > timezone, which was my requirement. Requirements change, and now I need> > allow the configuration of any timezone.
> >
> > ---
> > Also check in registry with regedit if value is updated before you
is> > ---
> > No. The registry is not updated after the date/time control panel app
app> > used. But, the timezone setting remains correct in the control panel
where> > until I reboot. The registry never changes in
> > HKLM\System\CurrentControlSet\Control\TimeZoneInfo rmation. I wonder
message> > the control panel app keeps the timezone setting?
> >
> > --
> > Regards.
> > Mark K Vallevand
> >
> > "Slobodan Brcin" <sbrcin@ptt.yu> wrote in message
> > news:%23sMgeIvnDHA.744@tk2msftngp13.phx.gbl...> > > Why again same post?
> > > Have you seen my reply from yesterday?
> > >
> > > Regards,
> > > Slobodan
> > >
> > > "Mark K Vallevand" <markus AT rsvl DOT unisys DOT com> wrote in
to> > > news:OItwq7unDHA.2628@TK2MSFTNGP10.phx.gbl...
> > > > I have EWF in the image, but not enabled yet.
> > > >
> > > > I don't enable it until FBA is done, and after a couple of sessions
fine,> embedded> > > setup
> > > > things and install some applications. In fact, one of the two> > > > releases I make runs with it disabled all the time.> > message
> > > >
> > > > It behaves the same if EWF is disabled or enabled.
> > > >
> > > >
> > > > --
> > > > Regards.
> > > > Mark K Vallevand
> > > >
> > > >
> > > > "Doug Hoeffel (eMVP)" <doug.hoeffelNo@SpAmMcamtronics.com> wrote in
> > > message
> > > > news:u$oUCjlnDHA.2808@TK2MSFTNGP10.phx.gbl...
> > > > > Do you have EWF enabled by chance?
> > > > >
> > > > > "Mark K Vallevand" <markus AT rsvl DOT unisys DOT com> wrote in> > > > > news:e3xoEhlnDHA.2848@TK2MSFTNGP10.phx.gbl...
> > > > > > I've added the Date/Time Control Panel and the applet works
registry> > but> > > > when> > reboot,
> > > > > I
> > > > > > reboot, the time zone is set back to GMT. As long as I never> > > > the
> > > > > > time zone is OK. The applet shows it correct. But, the
>> > > > > > information at> >
> > > HKLM\System\CurrentControlSet\Control\TimeZoneInfo rmation
> > > > > is
> > > > > > never updated.
> > > > > >
> > > > > > What am I missing?
> > > > > >
> > > > > > --
> > > > > > Regards.
> > > > > > Mark K Vallevand
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
>
> I've got more info...registry
> The date/time conptrol panel app is the same as XP Pro. So there isn't a
> different version in XPe.
> I can't see anything using regmon. It certainly never updates the
> with time zone information.twice.
>
> I'm guessing that there is some missing component in my image. Some
> security thing?
>
> Does this work for anyone? Can you set the timezone?
>
> I'm getting close to panic mode.
>
> --
> Regards.
> Mark K Vallevand
>
>
> "Mark K Vallevand" <markus AT rsvl DOT unisys DOT com> wrote in message
> news:uCCPubvnDHA.3304@tk2msftngp13.phx.gbl...> > My network connection was wonky yesterday. So, some stuff got sent
have> > And, I haven't seen your reply in this newsreader. I just looked in> another> > reader. To answer your questions.
> >
> > ---
> > http://www.microsoft.com/windows/emb...p/timezone.asp
> > Can you use it?
> > ---
> > Yes, I've seen it. In fact, I already had this solution in hand. I
> areboot.> > component that has the registry settings to put the image into the GMT> to
> > timezone, which was my requirement. Requirements change, and now I need> > allow the configuration of any timezone.
> >
> > ---
> > Also check in registry with regedit if value is updated before you
is> > ---
> > No. The registry is not updated after the date/time control panel app
app> > used. But, the timezone setting remains correct in the control panel
where> > until I reboot. The registry never changes in
> > HKLM\System\CurrentControlSet\Control\TimeZoneInfo rmation. I wonder
message> > the control panel app keeps the timezone setting?
> >
> > --
> > Regards.
> > Mark K Vallevand
> >
> > "Slobodan Brcin" <sbrcin@ptt.yu> wrote in message
> > news:%23sMgeIvnDHA.744@tk2msftngp13.phx.gbl...> > > Why again same post?
> > > Have you seen my reply from yesterday?
> > >
> > > Regards,
> > > Slobodan
> > >
> > > "Mark K Vallevand" <markus AT rsvl DOT unisys DOT com> wrote in
to> > > news:OItwq7unDHA.2628@TK2MSFTNGP10.phx.gbl...
> > > > I have EWF in the image, but not enabled yet.
> > > >
> > > > I don't enable it until FBA is done, and after a couple of sessions
fine,> embedded> > > setup
> > > > things and install some applications. In fact, one of the two> > > > releases I make runs with it disabled all the time.> > message
> > > >
> > > > It behaves the same if EWF is disabled or enabled.
> > > >
> > > >
> > > > --
> > > > Regards.
> > > > Mark K Vallevand
> > > >
> > > >
> > > > "Doug Hoeffel (eMVP)" <doug.hoeffelNo@SpAmMcamtronics.com> wrote in
> > > message
> > > > news:u$oUCjlnDHA.2808@TK2MSFTNGP10.phx.gbl...
> > > > > Do you have EWF enabled by chance?
> > > > >
> > > > > "Mark K Vallevand" <markus AT rsvl DOT unisys DOT com> wrote in> > > > > news:e3xoEhlnDHA.2848@TK2MSFTNGP10.phx.gbl...
> > > > > > I've added the Date/Time Control Panel and the applet works
registry> > but> > > > when> > reboot,
> > > > > I
> > > > > > reboot, the time zone is set back to GMT. As long as I never> > > > the
> > > > > > time zone is OK. The applet shows it correct. But, the
>> > > > > > information at> >
> > > HKLM\System\CurrentControlSet\Control\TimeZoneInfo rmation
> > > > > is
> > > > > > never updated.
> > > > > >
> > > > > > What am I missing?
> > > > > >
> > > > > > --
> > > > > > Regards.
> > > > > > Mark K Vallevand
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
>
| | LinkBack | Thread Tools | Display Modes |
 |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Anomolous settings in Date & Time control dialogued displayed | Michael F. LaTerz | Windows Vista Performance & Maintenance | 1 | 10-31-2006 12:17 AM |
| time zone problem .... | Stuart Stocking | Windows XP Beta | 0 | 09-28-2004 02:15 PM |
| Windows XP Expert Zone chat today, 3 P.M. Pacific Time, July 15 | Chris Norred [msft] | Windows XP Help & Support | 0 | 07-15-2003 06:17 PM |
| Windows XP Expert Zone chat today, 3 P.M. Pacific Time, July 15 | Chris Norred [msft] | Customize Windows XP | 0 | 07-15-2003 06:17 PM |
| Can not change Time Zone as Administrator | Miguel Lopez | Windows XP Basics | 0 | 06-29-2003 07:28 PM |
Linear Mode
Posts: n/a