uDOC Boot problem

I built image with M-system's uDOC minlogon ,USB boot 2.0 and formated the
uDOC using the utility given by the M-system . completing FBA, it shows "Disk
Read error" after restart.

I expecting suggestion , thanks in advance,

hanif

Could you try the UFPREP.EXE instead of the M-Systems utility? Just want to
see if it gives you the same problem.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded
SupplementalToolkit


"Mohamed Hanif KS" <MohamedHanifKS@discussions.microsoft.com> wrote in
message news:08C5BE31-E66E-48D4-9BC8-5FA9E60A46A9@microsoft.com...

>I built image with M-system's uDOC minlogon ,USB boot 2.0 and formated the
> uDOC using the utility given by the M-system . completing FBA, it shows
> "Disk
> Read error" after restart.
>
> I expecting suggestion , thanks in advance,
>
> hanif
>
>

thanks Sean

"the drive letter specified is not removable media" is the error shown when
i tried with Ufdprep.

I booted the uDOC in DOS , I cant boot it with the XP embedded image.

thanks and regards,

hanf

"Sean Liming (eMVP)" wrote:

>
> Could you try the UFPREP.EXE instead of the M-Systems utility? Just want to
> see if it gives you the same problem.
>
> Regards,
>
> Sean Liming
> www.sjjmicro.com / www.seanliming.com
> XP Embedded Book Author - XP Embedded Advanced, XP Embedded
> SupplementalToolkit
>
>
> "Mohamed Hanif KS" <MohamedHanifKS@discussions.microsoft.com> wrote in
> message news:08C5BE31-E66E-48D4-9BC8-5FA9E60A46A9@microsoft.com...

>
>
>

The uDOC firmware must be IDing as a fixed device.

1. You might want to try M-Systems XPe boot solution instead of XPe FP2007's
USB Boot 2.0.
2. I would contact M-System to see if there is a uDOC firmware issue with
regards to USB Boot 2.0, and tell them about the problem you are running
into. They might have a better idea of the issue.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded
SupplementalToolkit


"Mohamed Hanif KS" <MohamedHanifKS@discussions.microsoft.com> wrote in
message news:B39F297B-8DDC-4E08-8D47-5C0EA95854E1@microsoft.com...

> thanks Sean
>
> "the drive letter specified is not removable media" is the error shown
> when
> i tried with Ufdprep.
>
> I booted the uDOC in DOS , I cant boot it with the XP embedded image.
>
> thanks and regards,
>
> hanf
>
> "Sean Liming (eMVP)" wrote:
>

thank u,

I tried to boot the image only with M-systems minlogon macro .It shoed the
Windows logo for hours . I did not reach the Starting of the FBA.

then only I tried with USB Boot 2.0 with the component. It completed the FBA
then I get read error after the restart.

Once I tested with DOS , It booted .AT that time I formated the uDOC with
the M-sytem utility

"Sean Liming (eMVP)" wrote:

>
> The uDOC firmware must be IDing as a fixed device.
>
> 1. You might want to try M-Systems XPe boot solution instead of XPe FP2007's
> USB Boot 2.0.
> 2. I would contact M-System to see if there is a uDOC firmware issue with
> regards to USB Boot 2.0, and tell them about the problem you are running
> into. They might have a better idea of the issue.
>
> Regards,
>
> Sean Liming
> www.sjjmicro.com / www.seanliming.com
> XP Embedded Book Author - XP Embedded Advanced, XP Embedded
> SupplementalToolkit
>
>
> "Mohamed Hanif KS" <MohamedHanifKS@discussions.microsoft.com> wrote in
> message news:B39F297B-8DDC-4E08-8D47-5C0EA95854E1@microsoft.com...

>
>
>

Mohamed,

>tried to boot the image only with M-systems minlogon macro .It shoed the
> Windows logo for hours . I did not reach the Starting of the FBA.

If you saw Winlogon logo screen the FBA had likely started on yoru device and might had finished by the time you schecked it.
Anyway, check the FBA log under \windows\FBA\FBAlog.txt.
Also, looking into \windows\setupapi.log may help.

> then only I tried with USB Boot 2.0 with the component. It completed the FBA
> then I get read error after the restart.
>
> Once I tested with DOS , It booted .AT that time I formated the uDOC with
> the M-sytem utility

With uDOC your best bet is to stick with M-System tools. Those are tested and supported by the manufacturer.

--
=========
Regards,
KM

hi,
I have a M-System uDOC, 2GB size. I like to boot XPe from that. But i
cant
format the uDOC with the ufdprep.exe because its not the removable
media. Can
any one help me. Thanks in advance.

with best regards,
KS.Mohamed hanif

hi,
I have a M-System uDOC, 2GB size. I like to boot XPe from that. But i
cant
format the uDOC with the ufdprep.exe because its not the removable
media. Can
any one help me. Thanks in advance.

with best regards,
KS.Mohamed hanif

thanks KM.

The uDOC has it's own set of preperation and formating tools - at least it
used too. I can't seem to find the link on their website.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit



"mohamed hanif" <mohamedhanifks@gmail.com> wrote in message
news:1173530792.813569.100740@p10g2000cwp.googlegr oups.com...

> hi,
> I have a M-System uDOC, 2GB size. I like to boot XPe from that. But i
> cant
> format the uDOC with the ufdprep.exe because its not the removable
> media. Can
> any one help me. Thanks in advance.
>
> with best regards,
> KS.Mohamed hanif
>