Unidentified network Vista SP1 to XP on wired lan

Posted: 04-07-2008, 06:46 PM
Hello
Before Installing Vista Ultimate X64 SP1 my wired (crossover cable)lan
was working fine. Network identified as private Home network. Settings
below with static IP

Vista Ultimate x64

IP 192.168.0.1
Subnet mask 255.255.255.0
Default gateway 192.168.0.1
Default Dns 192.168.0.1

Win XP

IP 192.168.0.2
Subnet mask 255.255.255.0
Default gateway 192.168.0.1
Default Dns 192.168.0.1

After I install SP1 setting as follows

Vista Ultimate x64

IP 192.168.0.1
Subnet mask 255.255.255.0
Default gateway
Default Dns 192.168.0.1

Win XP

IP 192.168.0.2
Subnet mask 255.255.255.0
Default gateway 192.168.0.1
Default Dns 192.168.0.1

Vista computer is connected to the internet with dial up modem. Vista
and XP connected with crossover cable no router. The problem is after
SP1 I can't set the default gateway on vista. Every time I type the
setting 192.168.0.1 and close the network center even after reboot the
gateway setting is cleared. As a result the network is Unidentified
network Public I can chance the public to private but after reboot it is
again public. I can however open XP in the network and share files with
XP. I have already disable IPv6 with no luck.

Any help will be appreciated.
Jan

Below is the contents of Ipconfig/all

Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\JP Du Plessis>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : JPDuPlessis-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
Physical Address. . . . . . . . . : 00-16-E6-59-B0-41
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.0.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 0.0.0.0
DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection*:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . :
isatap.{C6B200BF-13F3-41EB-B42E-4CD833F36
F16}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 6TO4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 12:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Reply With Quote

Responses to "Unidentified network Vista SP1 to XP on wired lan"

Robert L. \(MS-MVP\)
Guest
Posts: n/a
 
Re: Unidentified network Vista SP1 to XP on wired lan
Posted: 04-08-2008, 02:37 AM
We have many issue with this settings:

IP 192.168.0.1
Subnet mask 255.255.255.0
Default gateway 192.168.0.1
Default Dns 192.168.0.1

The Vista can't be DNS. Why does the Default gateway points to 192.168.0.1?
Can you ping each other by name?

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"JP Du Plessis" <plessis@lantic.net> wrote in message
news:OTtg5%23NmIHA.5268@TK2MSFTNGP05.phx.gbl...
> Hello
> Before Installing Vista Ultimate X64 SP1 my wired (crossover cable)lan was
> working fine. Network identified as private Home network. Settings below
> with static IP
>
> Vista Ultimate x64
>
> IP 192.168.0.1
> Subnet mask 255.255.255.0
> Default gateway 192.168.0.1
> Default Dns 192.168.0.1
>
> Win XP
>
> IP 192.168.0.2
> Subnet mask 255.255.255.0
> Default gateway 192.168.0.1
> Default Dns 192.168.0.1
>
> After I install SP1 setting as follows
>
> Vista Ultimate x64
>
> IP 192.168.0.1
> Subnet mask 255.255.255.0
> Default gateway
> Default Dns 192.168.0.1
>
> Win XP
>
> IP 192.168.0.2
> Subnet mask 255.255.255.0
> Default gateway 192.168.0.1
> Default Dns 192.168.0.1
>
> Vista computer is connected to the internet with dial up modem. Vista and
> XP connected with crossover cable no router. The problem is after SP1 I
> can't set the default gateway on vista. Every time I type the setting
> 192.168.0.1 and close the network center even after reboot the gateway
> setting is cleared. As a result the network is Unidentified network Public
> I can chance the public to private but after reboot it is again public. I
> can however open XP in the network and share files with XP. I have already
> disable IPv6 with no luck.
>
> Any help will be appreciated.
> Jan
>
> Below is the contents of Ipconfig/all
>
> Microsoft Windows [Version 6.0.6001]
> Copyright (c) 2006 Microsoft Corporation. All rights reserved.
>
> C:\Users\JP Du Plessis>ipconfig/all
>
> Windows IP Configuration
>
> Host Name . . . . . . . . . . . . : JPDuPlessis-PC
> Primary Dns Suffix . . . . . . . :
> Node Type . . . . . . . . . . . . : Hybrid
> IP Routing Enabled. . . . . . . . : No
> WINS Proxy Enabled. . . . . . . . : No
>
> Ethernet adapter Local Area Connection:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
> Physical Address. . . . . . . . . : 00-16-E6-59-B0-41
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
> IPv4 Address. . . . . . . . . . . : 192.168.0.1(Preferred)
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . : 0.0.0.0
> DNS Servers . . . . . . . . . . . : 192.168.0.1
> NetBIOS over Tcpip. . . . . . . . : Enabled
>
> Tunnel adapter Local Area Connection*:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . :
> isatap.{C6B200BF-13F3-41EB-B42E-4CD833F36
> F16}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
> Tunnel adapter Local Area Connection* 2:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : 6TO4 Adapter
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
> Tunnel adapter Local Area Connection* 12:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
> Physical Address. . . . . . . . . : 02-00-54-55-4E-01
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
Reply With Quote
JP Du Plessis
Guest
Posts: n/a
 
Re: Unidentified network Vista SP1 to XP on wired lan
Posted: 04-08-2008, 04:34 AM
Robert L. (MS-MVP) wrote:
> We have many issue with this settings:
>
> IP 192.168.0.1
> Subnet mask 255.255.255.0
> Default gateway 192.168.0.1
> Default Dns 192.168.0.1
>
> The Vista can't be DNS. Why does the Default gateway points to
> 192.168.0.1? Can you ping each other by name?
>
Yes I can ping by name.The default gateway point to 192.168.0.1 because
when you enable ICS the gateway is chance to 192.168.0.1.ICS is not
enable at this moment. The problem is that the gateway setting will not
stay.
Jan
Reply With Quote
Steve Winograd
Guest
Posts: n/a
 
Re: Unidentified network Vista SP1 to XP on wired lan
Posted: 04-08-2008, 03:50 PM
On Mon, 07 Apr 2008 20:46:07 +0200, JP Du Plessis <plessis@lantic.net>
wrote:
>Hello
>Before Installing Vista Ultimate X64 SP1 my wired (crossover cable)lan
>was working fine. Network identified as private Home network. Settings
>below with static IP
>
>Vista Ultimate x64
>
>IP 192.168.0.1
>Subnet mask 255.255.255.0
>Default gateway 192.168.0.1
>Default Dns 192.168.0.1
>
>Win XP
>
>IP 192.168.0.2
>Subnet mask 255.255.255.0
>Default gateway 192.168.0.1
>Default Dns 192.168.0.1
>
>After I install SP1 setting as follows
>
>Vista Ultimate x64
>
>IP 192.168.0.1
>Subnet mask 255.255.255.0
>Default gateway
>Default Dns 192.168.0.1
>
>Win XP
>
>IP 192.168.0.2
>Subnet mask 255.255.255.0
>Default gateway 192.168.0.1
>Default Dns 192.168.0.1
>
>Vista computer is connected to the internet with dial up modem. Vista
>and XP connected with crossover cable no router. The problem is after
>SP1 I can't set the default gateway on vista. Every time I type the
>setting 192.168.0.1 and close the network center even after reboot the
>gateway setting is cleared. As a result the network is Unidentified
>network Public I can chance the public to private but after reboot it is
>again public. I can however open XP in the network and share files with
>XP. I have already disable IPv6 with no luck.
>
>Any help will be appreciated.
>Jan
>
>Below is the contents of Ipconfig/all
>
>Microsoft Windows [Version 6.0.6001]
>Copyright (c) 2006 Microsoft Corporation. All rights reserved.
>
>C:\Users\JP Du Plessis>ipconfig/all
>
>Windows IP Configuration
>
> Host Name . . . . . . . . . . . . : JPDuPlessis-PC
> Primary Dns Suffix . . . . . . . :
> Node Type . . . . . . . . . . . . : Hybrid
> IP Routing Enabled. . . . . . . . : No
> WINS Proxy Enabled. . . . . . . . : No
>
>Ethernet adapter Local Area Connection:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
> Physical Address. . . . . . . . . : 00-16-E6-59-B0-41
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
> IPv4 Address. . . . . . . . . . . : 192.168.0.1(Preferred)
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . : 0.0.0.0
> DNS Servers . . . . . . . . . . . : 192.168.0.1
> NetBIOS over Tcpip. . . . . . . . : Enabled
>
>Tunnel adapter Local Area Connection*:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . :
>isatap.{C6B200BF-13F3-41EB-B42E-4CD833F36
>F16}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
>Tunnel adapter Local Area Connection* 2:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : 6TO4 Adapter
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
>Tunnel adapter Local Area Connection* 12:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
> Physical Address. . . . . . . . . : 02-00-54-55-4E-01
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
Vista's Local Area Connection doesn't connect to the Internet, so it
doesn't need default gateway or DNS server settings.

A computer can't be its own default gateway or DNS server, so your
previous settings specifying 192.168.0.1 weren't technically valid.

When you connect to your dial-up ISP, Vista's dial-up connection will
get default gateway and DNS server settings from your ISP.

The default gateway and DNS server settings don't determine whether a
network is public or private. Something else is causing the network
to be identified as public. I've seen Vista temporarily mis-identify
a network as public for a few minutes after the computer starts, then
correctly identify it as private.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com
Reply With Quote
krisd1234
Guest
Posts: n/a
 
Re: Unidentified network Vista SP1 to XP on wired lan
Posted: 04-10-2008, 07:19 PM

Getting exactly the same results. Have 2 Vista machines. One connected
to a cable modem as the host which is Vista Home Premium, ICS has been
set on the modem. The 2nd PC has Vista Ultimate and connects to the host
computer through a hub. Initially the host IP was set to 192.168.0.1
subnet of 255.255.255.0 and the gateway was set to 192.168.0.1 which is
what I was told to do to get a Home network and not an unidentified
network which occured when the gateway was left out. The client was set
to 192.168.0.50 subnet mask of 255.255.255.0 and a gateway of
192.168.0.1. After installing SP1 on both machines, the 2nd client
machine cannot get to all websites. It can get to some but not others!
Checked the host machine where the ICS has been set and noticed the
network is now an unidentified public network. The IP address of the LAN
is now 192.168.0.1 with a subnet of 255.255.255.0 and no gateway. Tried
to put the gateway in as 192.168.0.1 the setting does not stay. I know
the websites are all ok as when I go to the host machine you can connect
to the site. However on the client you cannot. Any ideas please?


--
krisd1234
Reply With Quote
JP Du Plessis
Guest
Posts: n/a
 
Re: Unidentified network Vista SP1 to XP on wired lan
Posted: 04-13-2008, 01:22 PM
krisd1234 wrote:
> Getting exactly the same results. Have 2 Vista machines. One connected
> to a cable modem as the host which is Vista Home Premium, ICS has been
> set on the modem. The 2nd PC has Vista Ultimate and connects to the host
> computer through a hub. Initially the host IP was set to 192.168.0.1
> subnet of 255.255.255.0 and the gateway was set to 192.168.0.1 which is
> what I was told to do to get a Home network and not an unidentified
> network which occured when the gateway was left out. The client was set
> to 192.168.0.50 subnet mask of 255.255.255.0 and a gateway of
> 192.168.0.1. After installing SP1 on both machines, the 2nd client
> machine cannot get to all websites. It can get to some but not others!
> Checked the host machine where the ICS has been set and noticed the
> network is now an unidentified public network. The IP address of the LAN
> is now 192.168.0.1 with a subnet of 255.255.255.0 and no gateway. Tried
> to put the gateway in as 192.168.0.1 the setting does not stay. I know
> the websites are all ok as when I go to the host machine you can connect
> to the site. However on the client you cannot. Any ideas please?
>
>
I don't know about a hub because I don't use one but what I have figure
out is with ICS The IP address for the client must be set to be obtain
IP automatically. The host get a static IP of 192.168.0.1 from ICS. I am
no expert but I hope this help.

Jan
Reply With Quote
Steve Winograd
Guest
Posts: n/a
 
Re: Unidentified network Vista SP1 to XP on wired lan
Posted: 04-13-2008, 09:34 PM
On Sun, 13 Apr 2008 15:22:47 +0200, JP Du Plessis <plessis@lantic.net>
wrote:
>krisd1234 wrote:
>> Getting exactly the same results. Have 2 Vista machines. One connected
>> to a cable modem as the host which is Vista Home Premium, ICS has been
>> set on the modem. The 2nd PC has Vista Ultimate and connects to the host
>> computer through a hub. Initially the host IP was set to 192.168.0.1
>> subnet of 255.255.255.0 and the gateway was set to 192.168.0.1 which is
>> what I was told to do to get a Home network and not an unidentified
>> network which occured when the gateway was left out. The client was set
>> to 192.168.0.50 subnet mask of 255.255.255.0 and a gateway of
>> 192.168.0.1. After installing SP1 on both machines, the 2nd client
>> machine cannot get to all websites. It can get to some but not others!
>> Checked the host machine where the ICS has been set and noticed the
>> network is now an unidentified public network. The IP address of the LAN
>> is now 192.168.0.1 with a subnet of 255.255.255.0 and no gateway. Tried
>> to put the gateway in as 192.168.0.1 the setting does not stay. I know
>> the websites are all ok as when I go to the host machine you can connect
>> to the site. However on the client you cannot. Any ideas please?
>>
>>
>I don't know about a hub because I don't use one but what I have figure
>out is with ICS The IP address for the client must be set to be obtain
>IP automatically. The host get a static IP of 192.168.0.1 from ICS. I am
>no expert but I hope this help.
>
>Jan
It's usually best to configure an ICS client to obtain an IP address
automatically. But it isn't necessary. You can make these manual IP
settings on an ICS client:

IP Address: 192.168.0.x (1<x<255)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DNS Server = 192.168.0.1 or your ISP's DNS server
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com
Reply With Quote
 
LinkBack Thread Tools Display Modes
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Unidentified network with Windows Vista - solved in SP1? MonikaSwede Windows Vista Networking & Sharing 3 01-28-2008 02:57 AM
Unidentified Network in Vista itguru Windows Vista Networking & Sharing 11 01-24-2008 03:06 PM
Vista computer thinks home network is an unidentified network jjg247 Windows Vista Networking & Sharing 4 01-16-2008 05:35 PM
Vista wireless/wired network sharing Jim McLaren Windows Vista Networking & Sharing 1 01-14-2008 01:31 PM
Network wireless Vista and wired XP Derrick Windows Vista Networking & Sharing 6 09-03-2007 06:34 PM