USB device

Posted: 05-15-2007, 12:32 AM

Scott

Guest
Posts: n/a

When my pc is inserted with a USB flash drive, the pc does not boot up and
stuck unless I change the boot sequence from USB device->DVD drive->hard
disk to DVD drive->Hard disk->USB device. What does the system look for as
the USB flash drive is not a bootable one? In general, it should skip to
DVD drive and skip to hard disk if there is no bootable disk in DVD drive.
Is it a hardware issue or OS issue or bios issue? Your guidance is
appreciated.

Thanks,

Scott

Responses to "USB device"

Don

Guest
Posts: n/a

Re: USB device

Posted: 05-15-2007, 01:31 AM

Scott wrote:

> When my pc is inserted with a USB flash drive, the pc does not boot up
> and stuck unless I change the boot sequence from USB device->DVD
> drive->hard disk to DVD drive->Hard disk->USB device. What does the
> system look for as the USB flash drive is not a bootable one? In
> general, it should skip to DVD drive and skip to hard disk if there is
> no bootable disk in DVD drive. Is it a hardware issue or OS issue or
> bios issue? Your guidance is appreciated.

If you have access to another computer you could try booting that
machine with the USB stick plugged in. If it boots with no problem
that would point to a BIOS problem on your machine. You might also
try examining the USB stick with Disk Manager after you boot up, to
see if there is something unusual about its partition table.

Rodrigo

Guest
Posts: n/a

USB Device

Posted: 06-10-2007, 09:42 PM

If I connect a new universal serial bus (USB) device to a USB 2.0 hub on a
computer, the computer does not detect the USB device.
Additionally, other USB devices that are already connected to the computer
stop functioning, and I have to restart the computer to detect the USB
devices. If the USB device is already installed on start, I have no problem.
The Legacy USB Support is disabled.

freddy

Guest
Posts: n/a

RE: USB Device

Posted: 06-11-2007, 02:55 AM

Rodrigo,

Check these troubleshooting steps for possible solution:

http://h10025.www1.hp.com/ewfrf/wc/g...name=c00820197

Those steps are what HP posted for their customers having similar issues.
--
freddy

"Rodrigo" wrote:

> If I connect a new universal serial bus (USB) device to a USB 2.0 hub on a
> computer, the computer does not detect the USB device.
> Additionally, other USB devices that are already connected to the computer
> stop functioning, and I have to restart the computer to detect the USB
> devices. If the USB device is already installed on start, I have no problem.
> The Legacy USB Support is disabled.
>

LinkBack

Thread Tools

Display Modes

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vista & External Storage Device & NAS device Issues	Theo M	Windows Vista File Management	0	06-04-2007 01:51 AM
windows mobile device center - device only connects on one USB por	Rob Ellis	Windows Vista Hardware & Devices	1	04-02-2007 04:16 AM
1394 device not identified after updates- "61338 Device Class- Unknown Device" error.	NP	Windows XP Device Drivers	0	01-04-2004 03:01 AM
Sony Cyber-shot Unknown Device in Device Manager	Rob	Windows XP Photos	2	01-02-2004 05:40 PM
Removing Unknown Device in Device Manager Software Issue	Mike	Windows XP Hardware	1	09-16-2003 02:48 PM