USB drivers

the 882 should run with 930 series drivers or any windows 2000. do you have
norton installed. he'll screw it up every time. that can be fixed.

s


"Kenneth" <swbkwb98@excite.com> wrote in message
news:04a001c37fe4$b287a150$a301280a@phx.gbl...

> I though XP PRO had all the drives for also any device.
> I think you need to visit HP website.
>
>

> >-----Original Message-----
> >I have an HP deskjet 882c and an HP scanjet 5200c
> >connected to usb ports on my new pc. Windows XP doesn't
> >have drivers for the scanjet and doesn't recognize it as
> >connected. The deskjet is recognized but stops printing
> >after a few lines. Are there current drivers for xp that
> >I can download for both of these older devices? The
> >deskjet was connected to a parallel port on my old pc

> and

> >worked fine. The scanjet was on a usb port on my old pc
> >and it worked fine also.
> >.
> >

Drivers, even drivers included in XP are provided by and the responsibility
of the device manufacturer. You'll need to visit the hp web site and look
for XP compatible drivers for your printer and scanner and/or check to be
sure your devices are being supported in XP.
www.hp.com.

--
Michael Solomon MS-MVP
Windows Shell/User
Backup is a PC User's Best Friend
DTS-L.Org: http://www.dts-l.org/

"Marion Zapolin" <mzap@worldnet.att.net> wrote in message
news:083601c37fcb$8e56fce0$a001280a@phx.gbl...

> I have an HP deskjet 882c and an HP scanjet 5200c
> connected to usb ports on my new pc. Windows XP doesn't
> have drivers for the scanjet and doesn't recognize it as
> connected. The deskjet is recognized but stops printing
> after a few lines. Are there current drivers for xp that
> I can download for both of these older devices? The
> deskjet was connected to a parallel port on my old pc and
> worked fine. The scanjet was on a usb port on my old pc
> and it worked fine also.

i need to download hidusb.sys,nidclass.sys and
hidparse.sys. I can't located them. Any assistance would
be appreciated. thanks.

Windows XP

Todd

First place to look:

c:\windows\system32\drivers

Then

c:\windows\driver cache\i386\driver.cab

Cari
www.coribright.com



"todd m" <anonymous@discussions.microsoft.com> wrote in message
news:5e3501c3e60e$fa9a6960$a101280a@phx.gbl...

>i need to download hidusb.sys,nidclass.sys and
> hidparse.sys. I can't located them. Any assistance would
> be appreciated. thanks.
>
> Windows XP
>
> Todd

Upgraded from Xp home to Xp pro. Everything worked
perfectly until downloaded service pack 1 from
Microsoft. Then the USb ports were disabled

Try uninstalling them from the Device Manager, restart the PC and XP should
reinstall with the correct drivers.
--
Cari
MS-MVP Windows Technologies - Printing/Imaging/Hardware
www.coribright.com
"Carolyn Pippenger" <anonymous@discussions.microsoft.com> wrote in message
news:8c7701c432c7$43cb63a0$a601280a@phx.gbl...

> Upgraded from Xp home to Xp pro. Everything worked
> perfectly until downloaded service pack 1 from
> Microsoft. Then the USb ports were disabled

Had similar problem. I did the same upgrade, now my USB
ports are not USB 2.0 anymore. They work for USB 1 but,
not for USB 2.

>-----Original Message-----
>Upgraded from Xp home to Xp pro. Everything worked
>perfectly until downloaded service pack 1 from
>Microsoft. Then the USb ports were disabled
>.
>