Video Card (ati radeon 9000 agp) not working

Posted: 10-17-2003, 11:33 PM

Nat

Guest
Posts: n/a

Im running a FIC motherboard with a VIA km266 north
bridge. I recently purchased a RADEON 9000 agp and
installed it. The problem occured after installation and
the graphics card will not load. In the hardware manager
the error message says "This device cannot find enough
free resources that it can use. (Code 12)" and that i
need to disable a device to make it run. The motherboard
has S3 ProSavageDDR integrated graphics and that may be
the problem, but i have the newest version of my BIOS
(award) and all drivers (GART and agp port for the
motherboard) are up to date.

Any help would be greatly appreciated.
Feel free to email me at the given adress.
Thank You.

Video Card (ati radeon 9000 agp) not working

Responses to "Video Card (ati radeon 9000 agp) not working"

ACCLPM AKA UK Cynic

Guest
Posts: n/a

Re: Video Card (ati radeon 9000 agp) not working

Posted: 10-18-2003, 01:49 AM

Have you tried disabling the onboard chip in the cmos setup?

"Nat" <the_detailer@hotmail.com> wrote in message
news:04e801c39507$08364570$a301280a@phx.gbl...
Im running a FIC motherboard with a VIA km266 north
bridge. I recently purchased a RADEON 9000 agp and
installed it. The problem occured after installation and
the graphics card will not load. In the hardware manager
the error message says "This device cannot find enough
free resources that it can use. (Code 12)" and that i
need to disable a device to make it run. The motherboard
has S3 ProSavageDDR integrated graphics and that may be
the problem, but i have the newest version of my BIOS
(award) and all drivers (GART and agp port for the
motherboard) are up to date.

Any help would be greatly appreciated.
Feel free to email me at the given adress.
Thank You.

Nat

Guest
Posts: n/a

Re: Have you tried disabling the chip

Posted: 10-18-2003, 04:26 AM

Yes, I looked throught my CMOS setup, and motherboard
manual, and it seems that the built in graphics want to
stay as the main display driver. I have been through the
setup and installation process several times and the
problem continually arises. One thing i forgot to
mention, there is a functioning hardware device set as
RADEON 9000-Secondary. I have tried to uninstall this
device(and have suceeded to the point were it is out of
the hardware manager) but it is always reinstalled once i
restart. I may be fighting a unbeatable battle here but
I would like to try and make this work.

>-----Original Message-----
>Have you tried disabling the onboard chip in the cmos

setup?

>
>"Nat" <the_detailer@hotmail.com> wrote in message
>news:04e801c39507$08364570$a301280a@phx.gbl...
>Im running a FIC motherboard with a VIA km266 north
>bridge. I recently purchased a RADEON 9000 agp and
>installed it. The problem occured after installation and
>the graphics card will not load. In the hardware manager
>the error message says "This device cannot find enough
>free resources that it can use. (Code 12)" and that i
>need to disable a device to make it run. The motherboard
>has S3 ProSavageDDR integrated graphics and that may be
>the problem, but i have the newest version of my BIOS
>(award) and all drivers (GART and agp port for the
>motherboard) are up to date.
>
>Any help would be greatly appreciated.
>Feel free to email me at the given adress.
>Thank You.
>
>
>.
>

ACCLPM AKA UK Cynic

Guest
Posts: n/a

Re: Have you tried disabling the chip

Posted: 10-18-2003, 09:57 AM

What m/board do you have? All that i've come across allow onboard
devices to be disabled.
you may also wish to look at
http://mirror.ati.com/support/faq/index.html

"Nat" <the_detailer@hotmail.com> wrote in message
news:008901c3952f$f9b84330$a601280a@phx.gbl...
Yes, I looked throught my CMOS setup, and motherboard
manual, and it seems that the built in graphics want to
stay as the main display driver. I have been through the
setup and installation process several times and the
problem continually arises. One thing i forgot to
mention, there is a functioning hardware device set as
RADEON 9000-Secondary. I have tried to uninstall this
device(and have suceeded to the point were it is out of
the hardware manager) but it is always reinstalled once i
restart. I may be fighting a unbeatable battle here but
I would like to try and make this work.

>-----Original Message-----
>Have you tried disabling the onboard chip in the cmos

setup?

>
>"Nat" <the_detailer@hotmail.com> wrote in message
>news:04e801c39507$08364570$a301280a@phx.gbl...
>Im running a FIC motherboard with a VIA km266 north
>bridge. I recently purchased a RADEON 9000 agp and
>installed it. The problem occured after installation and
>the graphics card will not load. In the hardware manager
>the error message says "This device cannot find enough
>free resources that it can use. (Code 12)" and that i
>need to disable a device to make it run. The motherboard
>has S3 ProSavageDDR integrated graphics and that may be
>the problem, but i have the newest version of my BIOS
>(award) and all drivers (GART and agp port for the
>motherboard) are up to date.
>
>Any help would be greatly appreciated.
>Feel free to email me at the given adress.
>Thank You.
>
>
>.
>

LinkBack

Thread Tools

Display Modes

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ATI Mobility RADEON 9000	Juan Carlos Canto	Windows Vista Hardware & Devices	1	07-08-2006 02:53 AM
ATI Radeon 9000 Pro	Mark	Windows XP Device Drivers	1	11-21-2003 01:08 AM
Radeon 9000 Code12?	Chris	Windows XP Hardware	3	10-16-2003 09:02 PM
ATI Radeon AIW 9000 Pro card / XP / Asus P4T-E problem?	Michael R. Samario	Windows XP Hardware	0	09-15-2003 06:52 PM
Problem w/ new radeon 9000 pro	Ben	Windows XP Video	0	09-03-2003 05:02 AM