Vista - Booting off a stripped set

Posted: 12-29-2008, 04:57 PM
(I'm unable to post in the Vista newsgroups! Anyone knows why? The site acts
as if I'm not logged in (the sign in button is always present) and simply
redirects me to the same page when I try to click the ask a question button.
I'm crossposting to the group instead, I hope it works.)

Hello, I'm trying to do something which isn't supported, but I'm trying to
work around it: Moving Vista to a stripped volume on dynamic disks.

My first attempt involved simply imaging my simple volume (using Acronis
True Image), creating the stripped set and then restoring the image to it.
That obviously didn't boot, and I later found out that you can't boot off
stripped volumes due to MBR limitations, which makes sense.

My second attempt was creating a small (100mb) partition at the start of the
drive, copying the c:\boot\ directory, and bootmgr file there, installing the
mbr on it (using VistaDVD:\boot\boosect /nt60 z: /mbr on the recovery cd) and
then booting from it. That failed however, as I wasn't able to edit the BCD
to point the {default} entry to the C: drive. The "bcdedit /store z:\boot\bcd
/set {default} device partition=c" command simply failed with "Operation not
supported".

Third attemps was excluding Vista from the stripped set: I create a 25gb
simple volume at the start of the disk, and used diskpart's "retain"command
on it. I then restored my image to the main stripped set, and moved the
contents of the \windows directory to the small 25gb partition, then adding a
symlink so that z:\windows to z:\, I then mounted that partition on
c:\windows and copied to boot manager to it. That almost worked, however, the
computer instead reboot where that "Vista is loading" black screen with the
progress bar would appear.


I'm stumped, does anyone know of a way to sucefully offload the booting
process to another, bootable, partition, so that I can keep my entire system
on the stripped set?

Vista - Booting off a stripped set


Responses to "Vista - Booting off a stripped set"

yuriks
Guest
Posts: n/a
 
Vista - Booting off a stripped set
Posted: 12-29-2008, 04:57 PM
(I'm unable to post in the Vista newsgroups! Anyone knows why? The site acts
as if I'm not logged in (the sign in button is always present) and simply
redirects me to the same page when I try to click the ask a question button.
I'm crossposting to the group instead, I hope it works.)

Hello, I'm trying to do something which isn't supported, but I'm trying to
work around it: Moving Vista to a stripped volume on dynamic disks.

My first attempt involved simply imaging my simple volume (using Acronis
True Image), creating the stripped set and then restoring the image to it.
That obviously didn't boot, and I later found out that you can't boot off
stripped volumes due to MBR limitations, which makes sense.

My second attempt was creating a small (100mb) partition at the start of the
drive, copying the c:\boot\ directory, and bootmgr file there, installing the
mbr on it (using VistaDVD:\boot\boosect /nt60 z: /mbr on the recovery cd) and
then booting from it. That failed however, as I wasn't able to edit the BCD
to point the {default} entry to the C: drive. The "bcdedit /store z:\boot\bcd
/set {default} device partition=c" command simply failed with "Operation not
supported".

Third attemps was excluding Vista from the stripped set: I create a 25gb
simple volume at the start of the disk, and used diskpart's "retain"command
on it. I then restored my image to the main stripped set, and moved the
contents of the \windows directory to the small 25gb partition, then adding a
symlink so that z:\windows to z:\, I then mounted that partition on
c:\windows and copied to boot manager to it. That almost worked, however, the
computer instead reboot where that "Vista is loading" black screen with the
progress bar would appear.


I'm stumped, does anyone know of a way to sucefully offload the booting
process to another, bootable, partition, so that I can keep my entire system
on the stripped set?
Andrew E.
Guest
Posts: n/a
 
RE: Vista - Booting off a stripped set
Posted: 12-30-2008, 01:35 AM
First off,youre dead-wrong on "can't boot of a striped set",RAID 0 is
defiently
a striped set & typically most users choose this instead of RAID 1 for
performance.
2nd,i'm not 100% sure but dynamic disks dont belong in a RAID set,to read
more,go to :
http://support.microsoft.com/default...en-us%3B323442
Also,one should first set the BIOS for RAID,plus configure a RAID set in
the post-
BIOS RAID utility.To learn about RAID,go to:
http://www.intel.com/cd/channel/rese...eng/242788.htm

"yuriks" wrote:
> (I'm unable to post in the Vista newsgroups! Anyone knows why? The site acts
> as if I'm not logged in (the sign in button is always present) and simply
> redirects me to the same page when I try to click the ask a question button.
> I'm crossposting to the group instead, I hope it works.)
>
> Hello, I'm trying to do something which isn't supported, but I'm trying to
> work around it: Moving Vista to a stripped volume on dynamic disks.
>
> My first attempt involved simply imaging my simple volume (using Acronis
> True Image), creating the stripped set and then restoring the image to it.
> That obviously didn't boot, and I later found out that you can't boot off
> stripped volumes due to MBR limitations, which makes sense.
>
> My second attempt was creating a small (100mb) partition at the start of the
> drive, copying the c:\boot\ directory, and bootmgr file there, installing the
> mbr on it (using VistaDVD:\boot\boosect /nt60 z: /mbr on the recovery cd) and
> then booting from it. That failed however, as I wasn't able to edit the BCD
> to point the {default} entry to the C: drive. The "bcdedit /store z:\boot\bcd
> /set {default} device partition=c" command simply failed with "Operation not
> supported".
>
> Third attemps was excluding Vista from the stripped set: I create a 25gb
> simple volume at the start of the disk, and used diskpart's "retain"command
> on it. I then restored my image to the main stripped set, and moved the
> contents of the \windows directory to the small 25gb partition, then adding a
> symlink so that z:\windows to z:\, I then mounted that partition on
> c:\windows and copied to boot manager to it. That almost worked, however, the
> computer instead reboot where that "Vista is loading" black screen with the
> progress bar would appear.
>
>
> I'm stumped, does anyone know of a way to sucefully offload the booting
> process to another, bootable, partition, so that I can keep my entire system
> on the stripped set?
Andrew E.
Guest
Posts: n/a
 
RE: Vista - Booting off a stripped set
Posted: 12-30-2008, 01:35 AM
First off,youre dead-wrong on "can't boot of a striped set",RAID 0 is
defiently
a striped set & typically most users choose this instead of RAID 1 for
performance.
2nd,i'm not 100% sure but dynamic disks dont belong in a RAID set,to read
more,go to :
http://support.microsoft.com/default...en-us%3B323442
Also,one should first set the BIOS for RAID,plus configure a RAID set in
the post-
BIOS RAID utility.To learn about RAID,go to:
http://www.intel.com/cd/channel/rese...eng/242788.htm

"yuriks" wrote:
> (I'm unable to post in the Vista newsgroups! Anyone knows why? The site acts
> as if I'm not logged in (the sign in button is always present) and simply
> redirects me to the same page when I try to click the ask a question button.
> I'm crossposting to the group instead, I hope it works.)
>
> Hello, I'm trying to do something which isn't supported, but I'm trying to
> work around it: Moving Vista to a stripped volume on dynamic disks.
>
> My first attempt involved simply imaging my simple volume (using Acronis
> True Image), creating the stripped set and then restoring the image to it.
> That obviously didn't boot, and I later found out that you can't boot off
> stripped volumes due to MBR limitations, which makes sense.
>
> My second attempt was creating a small (100mb) partition at the start of the
> drive, copying the c:\boot\ directory, and bootmgr file there, installing the
> mbr on it (using VistaDVD:\boot\boosect /nt60 z: /mbr on the recovery cd) and
> then booting from it. That failed however, as I wasn't able to edit the BCD
> to point the {default} entry to the C: drive. The "bcdedit /store z:\boot\bcd
> /set {default} device partition=c" command simply failed with "Operation not
> supported".
>
> Third attemps was excluding Vista from the stripped set: I create a 25gb
> simple volume at the start of the disk, and used diskpart's "retain"command
> on it. I then restored my image to the main stripped set, and moved the
> contents of the \windows directory to the small 25gb partition, then adding a
> symlink so that z:\windows to z:\, I then mounted that partition on
> c:\windows and copied to boot manager to it. That almost worked, however, the
> computer instead reboot where that "Vista is loading" black screen with the
> progress bar would appear.
>
>
> I'm stumped, does anyone know of a way to sucefully offload the booting
> process to another, bootable, partition, so that I can keep my entire system
> on the stripped set?
yuriks
Guest
Posts: n/a
 
Re: Vista - Booting off a stripped set
Posted: 12-30-2008, 01:44 AM
On Dec 29, 11:35*pm, Andrew E. <eckric...@msn.com> wrote:
> * First off,youre dead-wrong on "can't boot of a striped set",RAID 0 is
> defiently
> *a striped set & typically most users choose this instead of RAID 1 for
> performance.
> *2nd,i'm not 100% sure but dynamic disks dont belong in a RAID set,to read
> *more,go to : *http://support.microsoft.com/default...en-us%3B323442
> *Also,one should first set the BIOS for RAID,plus configure a RAID set in
> the post-
> *BIOS RAID utility.To learn about RAID,go to:http://www.intel.com/cd/channel/rese...ng/242788.htm*
>
> "yuriks" wrote:
> > (I'm unable to post in the Vista newsgroups! Anyone knows why? The siteacts
> > as if I'm not logged in (the sign in button is always present) and simply
> > redirects me to the same page when I try to click the ask a question button.
> > I'm crossposting to the group instead, I hope it works.)
>
> > Hello, I'm trying to do something which isn't supported, but I'm tryingto
> > work around it: Moving Vista to a stripped volume on dynamic disks.
>
> > My first attempt involved simply imaging my simple volume (using Acronis
> > True Image), creating the stripped set and then restoring the image to it.
> > That obviously didn't boot, and I later found out that you can't boot off
> > stripped volumes due to MBR limitations, which makes sense.
>
> > My second attempt was creating a small (100mb) partition at the start of the
> > drive, copying the c:\boot\ directory, and bootmgr file there, installing the
> > mbr on it (using VistaDVD:\boot\boosect /nt60 z: /mbr on the recovery cd) and
> > then booting from it. That failed however, as I wasn't able to edit theBCD
> > to point the {default} entry to the C: drive. The "bcdedit /store z:\boot\bcd
> > /set {default} device partition=c" command simply failed with "Operation not
> > supported".
>
> > Third attemps was excluding Vista from the stripped set: I create a 25gb
> > simple volume at the start of the disk, and used diskpart's "retain"command
> > on it. I then restored my image to the main stripped set, and moved the
> > contents of the \windows directory to the small 25gb partition, then adding a
> > symlink so that z:\windows to z:\, I then mounted that partition on
> > c:\windows and copied to boot manager to it. That almost worked, however, the
> > computer instead reboot where that "Vista is loading" black screen withthe
> > progress bar would appear.
>
> > I'm stumped, does anyone know of a way to sucefully offload the booting
> > process to another, bootable, partition, so that I can keep my entire system
> > on the stripped set?
(So I just found out these groups are on Google Groups too, awesome.)

I'm not using a BIOS assisted FakeRAID, I was trying to use the
Windows software RAID, which you can create on... surprise, dynamic
disks. >_>
yuriks
Guest
Posts: n/a
 
Re: Vista - Booting off a stripped set
Posted: 12-30-2008, 01:44 AM
On Dec 29, 11:35*pm, Andrew E. <eckric...@msn.com> wrote:
> * First off,youre dead-wrong on "can't boot of a striped set",RAID 0 is
> defiently
> *a striped set & typically most users choose this instead of RAID 1 for
> performance.
> *2nd,i'm not 100% sure but dynamic disks dont belong in a RAID set,to read
> *more,go to : *http://support.microsoft.com/default...en-us%3B323442
> *Also,one should first set the BIOS for RAID,plus configure a RAID set in
> the post-
> *BIOS RAID utility.To learn about RAID,go to:http://www.intel.com/cd/channel/rese...ng/242788.htm*
>
> "yuriks" wrote:
> > (I'm unable to post in the Vista newsgroups! Anyone knows why? The siteacts
> > as if I'm not logged in (the sign in button is always present) and simply
> > redirects me to the same page when I try to click the ask a question button.
> > I'm crossposting to the group instead, I hope it works.)
>
> > Hello, I'm trying to do something which isn't supported, but I'm tryingto
> > work around it: Moving Vista to a stripped volume on dynamic disks.
>
> > My first attempt involved simply imaging my simple volume (using Acronis
> > True Image), creating the stripped set and then restoring the image to it.
> > That obviously didn't boot, and I later found out that you can't boot off
> > stripped volumes due to MBR limitations, which makes sense.
>
> > My second attempt was creating a small (100mb) partition at the start of the
> > drive, copying the c:\boot\ directory, and bootmgr file there, installing the
> > mbr on it (using VistaDVD:\boot\boosect /nt60 z: /mbr on the recovery cd) and
> > then booting from it. That failed however, as I wasn't able to edit theBCD
> > to point the {default} entry to the C: drive. The "bcdedit /store z:\boot\bcd
> > /set {default} device partition=c" command simply failed with "Operation not
> > supported".
>
> > Third attemps was excluding Vista from the stripped set: I create a 25gb
> > simple volume at the start of the disk, and used diskpart's "retain"command
> > on it. I then restored my image to the main stripped set, and moved the
> > contents of the \windows directory to the small 25gb partition, then adding a
> > symlink so that z:\windows to z:\, I then mounted that partition on
> > c:\windows and copied to boot manager to it. That almost worked, however, the
> > computer instead reboot where that "Vista is loading" black screen withthe
> > progress bar would appear.
>
> > I'm stumped, does anyone know of a way to sucefully offload the booting
> > process to another, bootable, partition, so that I can keep my entire system
> > on the stripped set?
(So I just found out these groups are on Google Groups too, awesome.)

I'm not using a BIOS assisted FakeRAID, I was trying to use the
Windows software RAID, which you can create on... surprise, dynamic
disks. >_>
philo
Guest
Posts: n/a
 
Re: Vista - Booting off a stripped set
Posted: 12-30-2008, 09:30 AM

"yuriks" <yuriks.br@gmail.com> wrote in message
news:16dce37b-242d-4ad5-9562-0b04937799e5@v42g2000yqj.googlegroups.com...
On Dec 29, 11:35 pm, Andrew E. <eckric...@msn.com> wrote:
> First off,youre dead-wrong on "can't boot of a striped set",RAID 0 is
> defiently
> a striped set & typically most users choose this instead of RAID 1 for
> performance.
> 2nd,i'm not 100% sure but dynamic disks dont belong in a RAID set,to read
> more,go to :
http://support.microsoft.com/default...en-us%3B323442
> Also,one should first set the BIOS for RAID,plus configure a RAID set in
> the post-
> BIOS RAID utility.To learn about RAID,go
to:http://www.intel.com/cd/channel/rese...eng/242788.htm
>
> "yuriks" wrote:
> > (I'm unable to post in the Vista newsgroups! Anyone knows why? The site
acts
> > as if I'm not logged in (the sign in button is always present) and
simply
> > redirects me to the same page when I try to click the ask a question
button.
> > I'm crossposting to the group instead, I hope it works.)
>
> > Hello, I'm trying to do something which isn't supported, but I'm trying
to
> > work around it: Moving Vista to a stripped volume on dynamic disks.
>
> > My first attempt involved simply imaging my simple volume (using Acronis
> > True Image), creating the stripped set and then restoring the image to
it.
> > That obviously didn't boot, and I later found out that you can't boot
off
> > stripped volumes due to MBR limitations, which makes sense.
>
> > My second attempt was creating a small (100mb) partition at the start of
the
> > drive, copying the c:\boot\ directory, and bootmgr file there,
installing the
> > mbr on it (using VistaDVD:\boot\boosect /nt60 z: /mbr on the recovery
cd) and
> > then booting from it. That failed however, as I wasn't able to edit the
BCD
> > to point the {default} entry to the C: drive. The "bcdedit /store
z:\boot\bcd
> > /set {default} device partition=c" command simply failed with "Operation
not
> > supported".
>
> > Third attemps was excluding Vista from the stripped set: I create a 25gb
> > simple volume at the start of the disk, and used diskpart's
"retain"command
> > on it. I then restored my image to the main stripped set, and moved the
> > contents of the \windows directory to the small 25gb partition, then
adding a
> > symlink so that z:\windows to z:\, I then mounted that partition on
> > c:\windows and copied to boot manager to it. That almost worked,
however, the
> > computer instead reboot where that "Vista is loading" black screen with
the
> > progress bar would appear.
>
> > I'm stumped, does anyone know of a way to sucefully offload the booting
> > process to another, bootable, partition, so that I can keep my entire
system
> > on the stripped set?
(So I just found out these groups are on Google Groups too, awesome.)

I'm not using a BIOS assisted FakeRAID, I was trying to use the
Windows software RAID, which you can create on... surprise, dynamic
disks. >_>

You have things reversed.

If you want, you can keep trying, but it is not going to work.

The so called "fake" RAID is the dynamic disc and that's not bootable.
If you choose to use RAID for your "boot" volume, you need to create it in
your bios.


philo
Guest
Posts: n/a
 
Re: Vista - Booting off a stripped set
Posted: 12-30-2008, 09:30 AM

"yuriks" <yuriks.br@gmail.com> wrote in message
news:16dce37b-242d-4ad5-9562-0b04937799e5@v42g2000yqj.googlegroups.com...
On Dec 29, 11:35 pm, Andrew E. <eckric...@msn.com> wrote:
> First off,youre dead-wrong on "can't boot of a striped set",RAID 0 is
> defiently
> a striped set & typically most users choose this instead of RAID 1 for
> performance.
> 2nd,i'm not 100% sure but dynamic disks dont belong in a RAID set,to read
> more,go to :
http://support.microsoft.com/default...en-us%3B323442
> Also,one should first set the BIOS for RAID,plus configure a RAID set in
> the post-
> BIOS RAID utility.To learn about RAID,go
to:http://www.intel.com/cd/channel/rese...eng/242788.htm
>
> "yuriks" wrote:
> > (I'm unable to post in the Vista newsgroups! Anyone knows why? The site
acts
> > as if I'm not logged in (the sign in button is always present) and
simply
> > redirects me to the same page when I try to click the ask a question
button.
> > I'm crossposting to the group instead, I hope it works.)
>
> > Hello, I'm trying to do something which isn't supported, but I'm trying
to
> > work around it: Moving Vista to a stripped volume on dynamic disks.
>
> > My first attempt involved simply imaging my simple volume (using Acronis
> > True Image), creating the stripped set and then restoring the image to
it.
> > That obviously didn't boot, and I later found out that you can't boot
off
> > stripped volumes due to MBR limitations, which makes sense.
>
> > My second attempt was creating a small (100mb) partition at the start of
the
> > drive, copying the c:\boot\ directory, and bootmgr file there,
installing the
> > mbr on it (using VistaDVD:\boot\boosect /nt60 z: /mbr on the recovery
cd) and
> > then booting from it. That failed however, as I wasn't able to edit the
BCD
> > to point the {default} entry to the C: drive. The "bcdedit /store
z:\boot\bcd
> > /set {default} device partition=c" command simply failed with "Operation
not
> > supported".
>
> > Third attemps was excluding Vista from the stripped set: I create a 25gb
> > simple volume at the start of the disk, and used diskpart's
"retain"command
> > on it. I then restored my image to the main stripped set, and moved the
> > contents of the \windows directory to the small 25gb partition, then
adding a
> > symlink so that z:\windows to z:\, I then mounted that partition on
> > c:\windows and copied to boot manager to it. That almost worked,
however, the
> > computer instead reboot where that "Vista is loading" black screen with
the
> > progress bar would appear.
>
> > I'm stumped, does anyone know of a way to sucefully offload the booting
> > process to another, bootable, partition, so that I can keep my entire
system
> > on the stripped set?
(So I just found out these groups are on Google Groups too, awesome.)

I'm not using a BIOS assisted FakeRAID, I was trying to use the
Windows software RAID, which you can create on... surprise, dynamic
disks. >_>

You have things reversed.

If you want, you can keep trying, but it is not going to work.

The so called "fake" RAID is the dynamic disc and that's not bootable.
If you choose to use RAID for your "boot" volume, you need to create it in
your bios.


Rick Rogers
Guest
Posts: n/a
 
Re: Vista - Booting off a stripped set
Posted: 12-30-2008, 11:14 AM
Hi,

This may help you understand what you can and cannot do when it comes to
installing Vista on any given volume:
http://support.microsoft.com/kb/927520

Note also that you geberally can't move an existing installation from a
simple volume to a raid volume (software or hardware based) since the hal
layer of the OS will not be built around that configuration. That can only
be achieved normally through the actual installation of Vista to the
designated volume.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP
http://mvp.support.microsoft.com/
Windows help - www.rickrogers.org
My thoughts http://rick-mvp.blogspot.com

"yuriks" <yuriks.br@gmail.com> wrote in message
news:16dce37b-242d-4ad5-9562-0b04937799e5@v42g2000yqj.googlegroups.com...
On Dec 29, 11:35 pm, Andrew E. <eckric...@msn.com> wrote:
> First off,youre dead-wrong on "can't boot of a striped set",RAID 0 is
> defiently
> a striped set & typically most users choose this instead of RAID 1 for
> performance.
> 2nd,i'm not 100% sure but dynamic disks dont belong in a RAID set,to read
> more,go to :
> http://support.microsoft.com/default...en-us%3B323442
> Also,one should first set the BIOS for RAID,plus configure a RAID set in
> the post-
> BIOS RAID utility.To learn about RAID,go
> to:http://www.intel.com/cd/channel/rese...eng/242788.htm
>
> "yuriks" wrote:
> > (I'm unable to post in the Vista newsgroups! Anyone knows why? The site
> > acts
> > as if I'm not logged in (the sign in button is always present) and
> > simply
> > redirects me to the same page when I try to click the ask a question
> > button.
> > I'm crossposting to the group instead, I hope it works.)
>
> > Hello, I'm trying to do something which isn't supported, but I'm trying
> > to
> > work around it: Moving Vista to a stripped volume on dynamic disks.
>
> > My first attempt involved simply imaging my simple volume (using Acronis
> > True Image), creating the stripped set and then restoring the image to
> > it.
> > That obviously didn't boot, and I later found out that you can't boot
> > off
> > stripped volumes due to MBR limitations, which makes sense.
>
> > My second attempt was creating a small (100mb) partition at the start of
> > the
> > drive, copying the c:\boot\ directory, and bootmgr file there,
> > installing the
> > mbr on it (using VistaDVD:\boot\boosect /nt60 z: /mbr on the recovery
> > cd) and
> > then booting from it. That failed however, as I wasn't able to edit the
> > BCD
> > to point the {default} entry to the C: drive. The "bcdedit /store
> > z:\boot\bcd
> > /set {default} device partition=c" command simply failed with "Operation
> > not
> > supported".
>
> > Third attemps was excluding Vista from the stripped set: I create a 25gb
> > simple volume at the start of the disk, and used diskpart's
> > "retain"command
> > on it. I then restored my image to the main stripped set, and moved the
> > contents of the \windows directory to the small 25gb partition, then
> > adding a
> > symlink so that z:\windows to z:\, I then mounted that partition on
> > c:\windows and copied to boot manager to it. That almost worked,
> > however, the
> > computer instead reboot where that "Vista is loading" black screen with
> > the
> > progress bar would appear.
>
> > I'm stumped, does anyone know of a way to sucefully offload the booting
> > process to another, bootable, partition, so that I can keep my entire
> > system
> > on the stripped set?
(So I just found out these groups are on Google Groups too, awesome.)

I'm not using a BIOS assisted FakeRAID, I was trying to use the
Windows software RAID, which you can create on... surprise, dynamic
disks. >_>

Rick Rogers
Guest
Posts: n/a
 
Re: Vista - Booting off a stripped set
Posted: 12-30-2008, 11:14 AM
Hi,

This may help you understand what you can and cannot do when it comes to
installing Vista on any given volume:
http://support.microsoft.com/kb/927520

Note also that you geberally can't move an existing installation from a
simple volume to a raid volume (software or hardware based) since the hal
layer of the OS will not be built around that configuration. That can only
be achieved normally through the actual installation of Vista to the
designated volume.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP
http://mvp.support.microsoft.com/
Windows help - www.rickrogers.org
My thoughts http://rick-mvp.blogspot.com

"yuriks" <yuriks.br@gmail.com> wrote in message
news:16dce37b-242d-4ad5-9562-0b04937799e5@v42g2000yqj.googlegroups.com...
On Dec 29, 11:35 pm, Andrew E. <eckric...@msn.com> wrote:
> First off,youre dead-wrong on "can't boot of a striped set",RAID 0 is
> defiently
> a striped set & typically most users choose this instead of RAID 1 for
> performance.
> 2nd,i'm not 100% sure but dynamic disks dont belong in a RAID set,to read
> more,go to :
> http://support.microsoft.com/default...en-us%3B323442
> Also,one should first set the BIOS for RAID,plus configure a RAID set in
> the post-
> BIOS RAID utility.To learn about RAID,go
> to:http://www.intel.com/cd/channel/rese...eng/242788.htm
>
> "yuriks" wrote:
> > (I'm unable to post in the Vista newsgroups! Anyone knows why? The site
> > acts
> > as if I'm not logged in (the sign in button is always present) and
> > simply
> > redirects me to the same page when I try to click the ask a question
> > button.
> > I'm crossposting to the group instead, I hope it works.)
>
> > Hello, I'm trying to do something which isn't supported, but I'm trying
> > to
> > work around it: Moving Vista to a stripped volume on dynamic disks.
>
> > My first attempt involved simply imaging my simple volume (using Acronis
> > True Image), creating the stripped set and then restoring the image to
> > it.
> > That obviously didn't boot, and I later found out that you can't boot
> > off
> > stripped volumes due to MBR limitations, which makes sense.
>
> > My second attempt was creating a small (100mb) partition at the start of
> > the
> > drive, copying the c:\boot\ directory, and bootmgr file there,
> > installing the
> > mbr on it (using VistaDVD:\boot\boosect /nt60 z: /mbr on the recovery
> > cd) and
> > then booting from it. That failed however, as I wasn't able to edit the
> > BCD
> > to point the {default} entry to the C: drive. The "bcdedit /store
> > z:\boot\bcd
> > /set {default} device partition=c" command simply failed with "Operation
> > not
> > supported".
>
> > Third attemps was excluding Vista from the stripped set: I create a 25gb
> > simple volume at the start of the disk, and used diskpart's
> > "retain"command
> > on it. I then restored my image to the main stripped set, and moved the
> > contents of the \windows directory to the small 25gb partition, then
> > adding a
> > symlink so that z:\windows to z:\, I then mounted that partition on
> > c:\windows and copied to boot manager to it. That almost worked,
> > however, the
> > computer instead reboot where that "Vista is loading" black screen with
> > the
> > progress bar would appear.
>
> > I'm stumped, does anyone know of a way to sucefully offload the booting
> > process to another, bootable, partition, so that I can keep my entire
> > system
> > on the stripped set?
(So I just found out these groups are on Google Groups too, awesome.)

I'm not using a BIOS assisted FakeRAID, I was trying to use the
Windows software RAID, which you can create on... surprise, dynamic
disks. >_>

 
LinkBack Thread Tools Display Modes
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
html stripped from emails Asad Windows Vista Security 1 04-09-2008 05:41 AM
stripped SATA drive not avalable after Vista-32 install jwolf138 Windows Vista Hardware & Devices 1 08-12-2007 07:48 PM
OT: Has anyone ever stripped down XP Pro Paul Windows XP Embedded 13 12-17-2004 12:55 AM
upgrade NT to XP with stripped set jlc Windows XP Hardware 1 12-04-2003 06:10 PM
Defragment HD as a stripped Admin B Davis Windows XP 0 07-21-2003 05:12 PM