Vista Ultimate - VPN mystery

>netcfg -u ms_l2tp
>netcfg -u ms_pptp

>netcfg -l %windir%\inf\netrast.inf -c p -i ms_pptp
>netcfg -l %windir%\inf\netrast.inf -c p -i ms_l2tp

> We need re-install PPTP miniports first. These links may help.
>
> VPN IssuesMissing WAN Miniport L2TP and PPTP Symptoms: 1. The VPN
> connection appears with a red X. 2. You receive the following error
> message: You do not have ...
> www.chicagotech.net/vpn.htm
>
> RESOLVED: Network Wizard only ...The solution involved reinstalling
> the WAN Miniport (PPTP) driver. Here's how I did it: 1. Go to device
> manager and select "Show Hidden Devices" under the ...
>
> http://www.chicagotech.net/netforums...9aeb8e5e43c459
>
>
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
>
>
> "rb" <rb_atttt_nospam_sheermomentum.com> wrote in message
> news:%236%23Q7V9BIHA.5044@TK2MSFTNGP03.phx.gbl...

>>
>> I installed fresh Vista some 6-7 months ago. Since day one, the VPN to my
>> workplace via ISA2004 had worked like charm. Just over a week ago, I
>> connected, worked a few hours and then, all of the sudden, the connection
>> dropped with error 800 and, ever since, I can't connect to the office.
>> I can telnet on 1723. Other machines in my house (XP, 2003) connect no
>> problem. Other users in my company, Vista included, have no problem
>> connecting. I don't have VPC 2007 installed. In fact, nothing changed in
>> configuration of my computer in weeks prior to the "incident". Same goes
>> for our ISA server.
>> I also have another disk with Vista in my computer (good for recoveries).
>> I can VPN from that installation w/o any problems.
>>
>> In device manager, I could see PPTP Wan miniport but the connection would
>> always be described as if using L2TP exclusively. I don't know if this
>> was the case before. I tried reconfiguring the connection to use PPTP but
>> now it throws 609 error (device type was specified that does not exist).
>>
>> I also tried the netcfg trick. No change except that I now can't see
>> neither L2TP nor PPTP miniports in Device Manager. I can still create a
>> VPN connection but it's described and it behaves the same.
>>
>> Could someone please try to help me out with this problem. I wrote to
>> rras team 4-5 days ago, but haven't seen any replies yet.
>>
>> Thanks in advance.
>>
>> rb

>
>

>
> Thanks. Actually, I did it this way:
>
> - open cmd
>
> uninstall miniports

>>netcfg -u ms_l2tp
>>netcfg -u ms_pptp

>
> install them again (order may not be important)

>>netcfg -l %windir%\inf\netrast.inf -c p -i ms_pptp
>>netcfg -l %windir%\inf\netrast.inf -c p -i ms_l2tp

>
> I think it's a tad easier as it doesn't require any downloads.
>
> rb
>
> "Robert L (MS-MVP)" <noreply@chicagotech.net> wrote in message
> news:exQrExBCIHA.6012@TK2MSFTNGP03.phx.gbl...

>> We need re-install PPTP miniports first. These links may help.
>>
>> VPN IssuesMissing WAN Miniport L2TP and PPTP Symptoms: 1. The VPN
>> connection appears with a red X. 2. You receive the following error
>> message: You do not have ...
>> www.chicagotech.net/vpn.htm
>>
>> RESOLVED: Network Wizard only ...The solution involved reinstalling
>> the WAN Miniport (PPTP) driver. Here's how I did it: 1. Go to device
>> manager and select "Show Hidden Devices" under the ...
>>
>> http://www.chicagotech.net/netforums...9aeb8e5e43c459
>>
>>
>>
>> --
>> Bob Lin, MS-MVP, MCSE & CNE
>> Networking, Internet, Routing, VPN Troubleshooting on
>> http://www.ChicagoTech.net
>> How to Setup Windows, Network, VPN & Remote Access on
>> http://www.HowToNetworking.com
>>
>>
>> "rb" <rb_atttt_nospam_sheermomentum.com> wrote in message
>> news:%236%23Q7V9BIHA.5044@TK2MSFTNGP03.phx.gbl...

>>>
>>> I installed fresh Vista some 6-7 months ago. Since day one, the VPN to
>>> my workplace via ISA2004 had worked like charm. Just over a week ago, I
>>> connected, worked a few hours and then, all of the sudden, the
>>> connection dropped with error 800 and, ever since, I can't connect to
>>> the office.
>>> I can telnet on 1723. Other machines in my house (XP, 2003) connect no
>>> problem. Other users in my company, Vista included, have no problem
>>> connecting. I don't have VPC 2007 installed. In fact, nothing changed in
>>> configuration of my computer in weeks prior to the "incident". Same goes
>>> for our ISA server.
>>> I also have another disk with Vista in my computer (good for
>>> recoveries). I can VPN from that installation w/o any problems.
>>>
>>> In device manager, I could see PPTP Wan miniport but the connection
>>> would always be described as if using L2TP exclusively. I don't know if
>>> this was the case before. I tried reconfiguring the connection to use
>>> PPTP but now it throws 609 error (device type was specified that does
>>> not exist).
>>>
>>> I also tried the netcfg trick. No change except that I now can't see
>>> neither L2TP nor PPTP miniports in Device Manager. I can still create a
>>> VPN connection but it's described and it behaves the same.
>>>
>>> Could someone please try to help me out with this problem. I wrote to
>>> rras team 4-5 days ago, but haven't seen any replies yet.
>>>
>>> Thanks in advance.
>>>
>>> rb

>>
>>

>