Vista with Multiple Network Adaptors

Posted: 02-25-2008, 04:28 PM
Hello,

I have recently installed Vista on my desktop PC which seems to be having
Internet Connection problems. My Desktop PC has 2 Network Adaptors each
connected to separate routers. I have one router (A) with IP 192.168.1.1 on
Adaptor A and another router (B) with IP 192.168.2.1 on Adaptor B. The only
router with Internet Access is router B. The problem I have is when I open
internet explorer it seems to take a very long time to display the home page,
and some times it times-out completely. If I open up a command prompt and
type tracert www.google.com, the first line that comes up is 192.168.1.1 -
This implies that it is trying to get to google via Router A which has no
Internet access. I can only guess then it gives up after some time and tries
the second Network Connection.

Is there any way I can set Vista so that it looks for Internet Access on
Router B first, and not Router A? I've tried various things such as changing
the Network Binding order Under Advanced in Network Connections but this does
not help.

This did not happen under XP - XP seemed to know which Adaptor had Internet
Access without a delay/timeout.

Any suggestions would be greatly appreciated.


Vista with Multiple Network Adaptors


Responses to "Vista with Multiple Network Adaptors"

Robert L. \(MS-MVP\)
Guest
Posts: n/a
 
Re: Vista with Multiple Network Adaptors
Posted: 02-25-2008, 07:29 PM
Sounds like routing issue. Posting the result of ipconfig /all here may
help.

RoutingAnalysis 1: before changing the route table, any computers in
192.168.2.0 can access the resources on 10.0.0.0 network and the Internet
because all traffic ...
www.chicagotech.net/routing.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Dan Jason" <DanJason@discussions.microsoft.com> wrote in message
news:64DBCB56-EC96-4994-B3FF-BCE2F1649D0C@microsoft.com...
> Hello,
>
> I have recently installed Vista on my desktop PC which seems to be having
> Internet Connection problems. My Desktop PC has 2 Network Adaptors each
> connected to separate routers. I have one router (A) with IP 192.168.1.1
> on
> Adaptor A and another router (B) with IP 192.168.2.1 on Adaptor B. The
> only
> router with Internet Access is router B. The problem I have is when I open
> internet explorer it seems to take a very long time to display the home
> page,
> and some times it times-out completely. If I open up a command prompt and
> type tracert www.google.com, the first line that comes up is 192.168.1.1 -
> This implies that it is trying to get to google via Router A which has no
> Internet access. I can only guess then it gives up after some time and
> tries
> the second Network Connection.
>
> Is there any way I can set Vista so that it looks for Internet Access on
> Router B first, and not Router A? I've tried various things such as
> changing
> the Network Binding order Under Advanced in Network Connections but this
> does
> not help.
>
> This did not happen under XP - XP seemed to know which Adaptor had
> Internet
> Access without a delay/timeout.
>
> Any suggestions would be greatly appreciated.
>
>
Dan Jason
Guest
Posts: n/a
 
Re: Vista with Multiple Network Adaptors
Posted: 02-25-2008, 10:07 PM
Thanks for your help - The routing page implies I need to change the routing
table - how do I accomplish this? My IP Config /all results are included...

Windows IP Configuration

Host Name . . . . . . . . . . . . : ALPHA
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : home

Ethernet adapter Local Area Connection 2:

Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast
Ethernet
NIC #2
Physical Address. . . . . . . . . : 00-0E-2E-CC-E9-BF
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.2.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 25 February 2008 21:50:10
Lease Expires . . . . . . . . . . : 26 February 2008 21:50:09
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 192.168.2.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast
Ethernet
NIC
Physical Address. . . . . . . . . : 00-11-09-E8-88-D6
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.1.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 25 February 2008 21:50:10
Lease Expires . . . . . . . . . . : 26 February 2008 21:50:09
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection* 6:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 7:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . :
isatap.{101934F1-2F91-44D4-902E-4AA5CBA06
8B2}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 9:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : isatap.home
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes


Some more googling pointed me in the direction of the netsh command, is this
how I would change the routing table?

Thanks for you help
Robert L. \(MS-MVP\)
Guest
Posts: n/a
 
Re: Vista with Multiple Network Adaptors
Posted: 02-26-2008, 04:03 PM
The problem is the multihomed computer with two default gateways. Check this
link for more details.

issues of a multihomed computer with two NICsIssues of a multihomed computer
with two gateways. Case 1: The client setup a Windows ... Removing the LAN
default gateway 192.168.0.1 fixed the problem. ...
www.chicagotech.net/Routers/2gateway2.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Dan Jason" <DanJason@discussions.microsoft.com> wrote in message
news:6027CD69-AA44-4046-BF80-73BB7513E1B9@microsoft.com...
> Thanks for your help - The routing page implies I need to change the
> routing
> table - how do I accomplish this? My IP Config /all results are
> included...
>
> Windows IP Configuration
>
> Host Name . . . . . . . . . . . . : ALPHA
> Primary Dns Suffix . . . . . . . :
> Node Type . . . . . . . . . . . . : Hybrid
> IP Routing Enabled. . . . . . . . : Yes
> WINS Proxy Enabled. . . . . . . . : No
> DNS Suffix Search List. . . . . . : home
>
> Ethernet adapter Local Area Connection 2:
>
> Connection-specific DNS Suffix . : home
> Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast
> Ethernet
> NIC #2
> Physical Address. . . . . . . . . : 00-0E-2E-CC-E9-BF
> DHCP Enabled. . . . . . . . . . . : Yes
> Autoconfiguration Enabled . . . . : Yes
> IPv4 Address. . . . . . . . . . . : 192.168.2.100(Preferred)
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Lease Obtained. . . . . . . . . . : 25 February 2008 21:50:10
> Lease Expires . . . . . . . . . . : 26 February 2008 21:50:09
> Default Gateway . . . . . . . . . : 192.168.2.1
> DHCP Server . . . . . . . . . . . : 192.168.2.1
> DNS Servers . . . . . . . . . . . : 192.168.2.1
> NetBIOS over Tcpip. . . . . . . . : Enabled
>
> Ethernet adapter Local Area Connection:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast
> Ethernet
> NIC
> Physical Address. . . . . . . . . : 00-11-09-E8-88-D6
> DHCP Enabled. . . . . . . . . . . : Yes
> Autoconfiguration Enabled . . . . : Yes
> IPv4 Address. . . . . . . . . . . : 192.168.1.100(Preferred)
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Lease Obtained. . . . . . . . . . : 25 February 2008 21:50:10
> Lease Expires . . . . . . . . . . : 26 February 2008 21:50:09
> Default Gateway . . . . . . . . . : 192.168.1.1
> DHCP Server . . . . . . . . . . . : 192.168.1.1
> DNS Servers . . . . . . . . . . . : 192.168.1.1
> NetBIOS over Tcpip. . . . . . . . : Enabled
>
> Tunnel adapter Local Area Connection* 6:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
> Physical Address. . . . . . . . . : 02-00-54-55-4E-01
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
> Tunnel adapter Local Area Connection* 7:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . :
> isatap.{101934F1-2F91-44D4-902E-4AA5CBA06
> 8B2}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
> Tunnel adapter Local Area Connection* 9:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . : home
> Description . . . . . . . . . . . : isatap.home
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
>
> Some more googling pointed me in the direction of the netsh command, is
> this
> how I would change the routing table?
>
> Thanks for you help
Dan Jason
Guest
Posts: n/a
 
Re: Vista with Multiple Network Adaptors
Posted: 02-26-2008, 06:44 PM
Ah nice one - the link pointed me in the direction of the route command - all
I had to do was:

ROUTE DELETE 0.0.0.0 MASK 0.0.0.0 192.168.1.1

The multihomed PC can now access the internet with no delays, and I can
still get access to all the local stuff on the LAN connected to the other
adaptor - thanks for your help :-)



"Robert L. (MS-MVP)" wrote:
> The problem is the multihomed computer with two default gateways. Check this
> link for more details.
>
> issues of a multihomed computer with two NICsIssues of a multihomed computer
> with two gateways. Case 1: The client setup a Windows ... Removing the LAN
> default gateway 192.168.0.1 fixed the problem. ...
> www.chicagotech.net/Routers/2gateway2.htm
>
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
>
>
> "Dan Jason" <DanJason@discussions.microsoft.com> wrote in message
> news:6027CD69-AA44-4046-BF80-73BB7513E1B9@microsoft.com...
> > Thanks for your help - The routing page implies I need to change the
> > routing
> > table - how do I accomplish this? My IP Config /all results are
> > included...
> >
> > Windows IP Configuration
> >
> > Host Name . . . . . . . . . . . . : ALPHA
> > Primary Dns Suffix . . . . . . . :
> > Node Type . . . . . . . . . . . . : Hybrid
> > IP Routing Enabled. . . . . . . . : Yes
> > WINS Proxy Enabled. . . . . . . . : No
> > DNS Suffix Search List. . . . . . : home
> >
> > Ethernet adapter Local Area Connection 2:
> >
> > Connection-specific DNS Suffix . : home
> > Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast
> > Ethernet
> > NIC #2
> > Physical Address. . . . . . . . . : 00-0E-2E-CC-E9-BF
> > DHCP Enabled. . . . . . . . . . . : Yes
> > Autoconfiguration Enabled . . . . : Yes
> > IPv4 Address. . . . . . . . . . . : 192.168.2.100(Preferred)
> > Subnet Mask . . . . . . . . . . . : 255.255.255.0
> > Lease Obtained. . . . . . . . . . : 25 February 2008 21:50:10
> > Lease Expires . . . . . . . . . . : 26 February 2008 21:50:09
> > Default Gateway . . . . . . . . . : 192.168.2.1
> > DHCP Server . . . . . . . . . . . : 192.168.2.1
> > DNS Servers . . . . . . . . . . . : 192.168.2.1
> > NetBIOS over Tcpip. . . . . . . . : Enabled
> >
> > Ethernet adapter Local Area Connection:
> >
> > Connection-specific DNS Suffix . :
> > Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast
> > Ethernet
> > NIC
> > Physical Address. . . . . . . . . : 00-11-09-E8-88-D6
> > DHCP Enabled. . . . . . . . . . . : Yes
> > Autoconfiguration Enabled . . . . : Yes
> > IPv4 Address. . . . . . . . . . . : 192.168.1.100(Preferred)
> > Subnet Mask . . . . . . . . . . . : 255.255.255.0
> > Lease Obtained. . . . . . . . . . : 25 February 2008 21:50:10
> > Lease Expires . . . . . . . . . . : 26 February 2008 21:50:09
> > Default Gateway . . . . . . . . . : 192.168.1.1
> > DHCP Server . . . . . . . . . . . : 192.168.1.1
> > DNS Servers . . . . . . . . . . . : 192.168.1.1
> > NetBIOS over Tcpip. . . . . . . . : Enabled
> >
> > Tunnel adapter Local Area Connection* 6:
> >
> > Media State . . . . . . . . . . . : Media disconnected
> > Connection-specific DNS Suffix . :
> > Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
> > Physical Address. . . . . . . . . : 02-00-54-55-4E-01
> > DHCP Enabled. . . . . . . . . . . : No
> > Autoconfiguration Enabled . . . . : Yes
> >
> > Tunnel adapter Local Area Connection* 7:
> >
> > Media State . . . . . . . . . . . : Media disconnected
> > Connection-specific DNS Suffix . :
> > Description . . . . . . . . . . . :
> > isatap.{101934F1-2F91-44D4-902E-4AA5CBA06
> > 8B2}
> > Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> > DHCP Enabled. . . . . . . . . . . : No
> > Autoconfiguration Enabled . . . . : Yes
> >
> > Tunnel adapter Local Area Connection* 9:
> >
> > Media State . . . . . . . . . . . : Media disconnected
> > Connection-specific DNS Suffix . : home
> > Description . . . . . . . . . . . : isatap.home
> > Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> > DHCP Enabled. . . . . . . . . . . : No
> > Autoconfiguration Enabled . . . . : Yes
> >
> >
> > Some more googling pointed me in the direction of the netsh command, is
> > this
> > how I would change the routing table?
> >
> > Thanks for you help
>
>
Robert L. \(MS-MVP\)
Guest
Posts: n/a
 
Re: Vista with Multiple Network Adaptors
Posted: 02-26-2008, 07:24 PM
Thank you for the update.

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Dan Jason" <DanJason@discussions.microsoft.com> wrote in message
news:EAC1463F-6205-418A-BFEB-B31DFC6178B4@microsoft.com...
> Ah nice one - the link pointed me in the direction of the route command -
> all
> I had to do was:
>
> ROUTE DELETE 0.0.0.0 MASK 0.0.0.0 192.168.1.1
>
> The multihomed PC can now access the internet with no delays, and I can
> still get access to all the local stuff on the LAN connected to the other
> adaptor - thanks for your help :-)
>
>
>
> "Robert L. (MS-MVP)" wrote:
>
>> The problem is the multihomed computer with two default gateways. Check
>> this
>> link for more details.
>>
>> issues of a multihomed computer with two NICsIssues of a multihomed
>> computer
>> with two gateways. Case 1: The client setup a Windows ... Removing the
>> LAN
>> default gateway 192.168.0.1 fixed the problem. ...
>> www.chicagotech.net/Routers/2gateway2.htm
>>
>>
>> --
>> Bob Lin, MS-MVP, MCSE & CNE
>> Networking, Internet, Routing, VPN Troubleshooting on
>> http://www.ChicagoTech.net
>> How to Setup Windows, Network, VPN & Remote Access on
>> http://www.HowToNetworking.com
>>
>>
>> "Dan Jason" <DanJason@discussions.microsoft.com> wrote in message
>> news:6027CD69-AA44-4046-BF80-73BB7513E1B9@microsoft.com...
>> > Thanks for your help - The routing page implies I need to change the
>> > routing
>> > table - how do I accomplish this? My IP Config /all results are
>> > included...
>> >
>> > Windows IP Configuration
>> >
>> > Host Name . . . . . . . . . . . . : ALPHA
>> > Primary Dns Suffix . . . . . . . :
>> > Node Type . . . . . . . . . . . . : Hybrid
>> > IP Routing Enabled. . . . . . . . : Yes
>> > WINS Proxy Enabled. . . . . . . . : No
>> > DNS Suffix Search List. . . . . . : home
>> >
>> > Ethernet adapter Local Area Connection 2:
>> >
>> > Connection-specific DNS Suffix . : home
>> > Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast
>> > Ethernet
>> > NIC #2
>> > Physical Address. . . . . . . . . : 00-0E-2E-CC-E9-BF
>> > DHCP Enabled. . . . . . . . . . . : Yes
>> > Autoconfiguration Enabled . . . . : Yes
>> > IPv4 Address. . . . . . . . . . . : 192.168.2.100(Preferred)
>> > Subnet Mask . . . . . . . . . . . : 255.255.255.0
>> > Lease Obtained. . . . . . . . . . : 25 February 2008 21:50:10
>> > Lease Expires . . . . . . . . . . : 26 February 2008 21:50:09
>> > Default Gateway . . . . . . . . . : 192.168.2.1
>> > DHCP Server . . . . . . . . . . . : 192.168.2.1
>> > DNS Servers . . . . . . . . . . . : 192.168.2.1
>> > NetBIOS over Tcpip. . . . . . . . : Enabled
>> >
>> > Ethernet adapter Local Area Connection:
>> >
>> > Connection-specific DNS Suffix . :
>> > Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast
>> > Ethernet
>> > NIC
>> > Physical Address. . . . . . . . . : 00-11-09-E8-88-D6
>> > DHCP Enabled. . . . . . . . . . . : Yes
>> > Autoconfiguration Enabled . . . . : Yes
>> > IPv4 Address. . . . . . . . . . . : 192.168.1.100(Preferred)
>> > Subnet Mask . . . . . . . . . . . : 255.255.255.0
>> > Lease Obtained. . . . . . . . . . : 25 February 2008 21:50:10
>> > Lease Expires . . . . . . . . . . : 26 February 2008 21:50:09
>> > Default Gateway . . . . . . . . . : 192.168.1.1
>> > DHCP Server . . . . . . . . . . . : 192.168.1.1
>> > DNS Servers . . . . . . . . . . . : 192.168.1.1
>> > NetBIOS over Tcpip. . . . . . . . : Enabled
>> >
>> > Tunnel adapter Local Area Connection* 6:
>> >
>> > Media State . . . . . . . . . . . : Media disconnected
>> > Connection-specific DNS Suffix . :
>> > Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
>> > Physical Address. . . . . . . . . : 02-00-54-55-4E-01
>> > DHCP Enabled. . . . . . . . . . . : No
>> > Autoconfiguration Enabled . . . . : Yes
>> >
>> > Tunnel adapter Local Area Connection* 7:
>> >
>> > Media State . . . . . . . . . . . : Media disconnected
>> > Connection-specific DNS Suffix . :
>> > Description . . . . . . . . . . . :
>> > isatap.{101934F1-2F91-44D4-902E-4AA5CBA06
>> > 8B2}
>> > Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
>> > DHCP Enabled. . . . . . . . . . . : No
>> > Autoconfiguration Enabled . . . . : Yes
>> >
>> > Tunnel adapter Local Area Connection* 9:
>> >
>> > Media State . . . . . . . . . . . : Media disconnected
>> > Connection-specific DNS Suffix . : home
>> > Description . . . . . . . . . . . : isatap.home
>> > Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
>> > DHCP Enabled. . . . . . . . . . . : No
>> > Autoconfiguration Enabled . . . . : Yes
>> >
>> >
>> > Some more googling pointed me in the direction of the netsh command, is
>> > this
>> > how I would change the routing table?
>> >
>> > Thanks for you help
>>
>>
saniboy5417
Guest
Posts: n/a
 
Re: Vista with Multiple Network Adaptors
Posted: 11-10-2008, 12:09 AM

Robert / Dan,

thanks for this conversation!

I was facing similar issues with my two routers (WLAN - Internet /
Ethernet - Printserver) and spent some time to find a solution on the
internet...

for anyone who reads & tries this and gets the error message
"the requested operation requires elevation":
1) run the DOS Box (Command Prompt) in Admin Mode (right click -> run
as administrator)
2) type the command, e.g. ROUTE DELETE 0.0.0.0 MASK 0.0.0.0
192.168.178.1 (adjust gateway for your "local" router)


thanks again - this thread was really helpful and the easiest I found
for someone who hadn't used Vista since it came out...

Christoph


--
saniboy5417
Robert L. \(MS-MVP\)
Guest
Posts: n/a
 
Re: Vista with Multiple Network Adaptors
Posted: 11-10-2008, 01:51 AM
thank you for the feedback.

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"saniboy5417" <guest@unknown-email.com> wrote in message
news:f5a8119f345b1f55b9947c8bca24dcab@nntp-gateway.com...
>
> Robert / Dan,
>
> thanks for this conversation!
>
> I was facing similar issues with my two routers (WLAN - Internet /
> Ethernet - Printserver) and spent some time to find a solution on the
> internet...
>
> for anyone who reads & tries this and gets the error message
> "the requested operation requires elevation":
> 1) run the DOS Box (Command Prompt) in Admin Mode (right click -> run
> as administrator)
> 2) type the command, e.g. ROUTE DELETE 0.0.0.0 MASK 0.0.0.0
> 192.168.178.1 (adjust gateway for your "local" router)
>
>
> thanks again - this thread was really helpful and the easiest I found
> for someone who hadn't used Vista since it came out...
>
> Christoph
>
>
> --
> saniboy5417
 
LinkBack Thread Tools Display Modes
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Vista (Home Prem) Permissions - Multiple Access to a Network Share sauvagii Windows Vista Networking & Sharing 2 01-30-2008 07:45 PM
Problem with Vista & multiple wireless network ports Neil Gould Windows Vista Networking & Sharing 2 09-10-2007 09:42 PM
Multiple IP's assigned to a network card in Windows Vista Alfredo Langa Windows Vista Networking & Sharing 0 12-04-2006 09:04 AM
no network adaptors available in device manager Bluemin Windows XP Configuration & Management 1 09-14-2004 05:33 PM
CheckPoint SecuRemote uninstall orphaned network adaptors and netoworking servic M. Coyle Windows XP Device Drivers 0 09-11-2003 03:21 AM