Win 2000 + Win XP Embedded Professional

Posted: 01-22-2004, 09:31 AM

Arvind Devarajan

Guest
Posts: n/a

Hi,
When I boot into a newly created runtime image of Win XP Embedded, I get a blue screen with this message:

STOP 0x00000074 (0x03, 0x02, 0x80087000, 0xC000014C)

This is how I created the boot image:

- Started with a normal PC, having 2 partitions - C drive containing Win 2000. This is where I have my Windows XP
Embedded development suite (evaluation version) installed. I built the Win XP runtime images on this drive using
the evaluation version of Win XP Embedded dev suite.
- Copied the generated files (from the target designer, after building the image) onto D: drive.
- Made changes in the c:\boot.ini to dual boot the system - booting in Win2000 or WinXP embedded.

This is what happens when I restart the machine:

- I get the boot menu. When I select Win 2000, the system boots as usual. No troubles.
- When I select WinXP embedded, the system displays the "Starting up..." progress bar, and immediately stops with
the blue screen, giving a BAD_SYSTEM_CONFIG_INFO message, along with the stop code:

STOP 0x00000074 (0x03, 0x02, 0x80087000, 0xC000014C)

Regards,
Arvind.

Responses to "Win 2000 + Win XP Embedded Professional"

Guest
Posts: n/a

Win 2000 + Win XP Embedded Professional

Posted: 01-22-2004, 01:37 PM

Hi Arvin,
I had the same problem too.
I replaced my ntldr and ntdetect.com shipped with w2k,
with those from XP (They are in your image folder eg),
because they can't boot XP. After that I could boot my XP
images 8-).

Maybe the MS guys can put this in the documentation...

hth,
Maarten

>-----Original Message-----
>Hi,
>When I boot into a newly created runtime image of Win XP

Embedded, I get a blue screen with this message:

>
>STOP 0x00000074 (0x03, 0x02, 0x80087000, 0xC000014C)
>
>This is how I created the boot image:
>
>- Started with a normal PC, having 2 partitions - C drive

containing Win 2000. This is where I have my Windows XP

> Embedded development suite (evaluation version)

installed. I built the Win XP runtime images on this drive
using

> the evaluation version of Win XP Embedded dev suite.
>- Copied the generated files (from the target designer,

after building the image) onto D: drive.

>- Made changes in the c:\boot.ini to dual boot the

system - booting in Win2000 or WinXP embedded.

>
>This is what happens when I restart the machine:
>
>- I get the boot menu. When I select Win 2000, the system

boots as usual. No troubles.

>- When I select WinXP embedded, the system displays

the "Starting up..." progress bar, and immediately stops
with

> the blue screen, giving a BAD_SYSTEM_CONFIG_INFO

message, along with the stop code:

>
> STOP 0x00000074 (0x03, 0x02, 0x80087000, 0xC000014C)
>
>Regards,
>Arvind.
>.
>

Arvind Devarajan

Guest
Posts: n/a

RE: Win 2000 + Win XP Embedded Professional

Posted: 01-23-2004, 07:41 AM

Hi Maarten,
Thanks, it worked.

By the way, MS mentions something similar in its knowledge base article 283433 too (see the resolution section of that article).

Thanks,
Arvind.

----- anonymous@discussions.microsoft.com wrote: -----

Hi Arvin,
I had the same problem too.
I replaced my ntldr and ntdetect.com shipped with w2k,
with those from XP (They are in your image folder eg),
because they can't boot XP. After that I could boot my XP
images 8-).

Maybe the MS guys can put this in the documentation...

hth,
Maarten

>-----Original Message-----
>Hi,
>When I boot into a newly created runtime image of Win XP

Embedded, I get a blue screen with this message:

>>STOP 0x00000074 (0x03, 0x02, 0x80087000, 0xC000014C)
>>This is how I created the boot image:
>>- Started with a normal PC, having 2 partitions - C drive

containing Win 2000. This is where I have my Windows XP

> Embedded development suite (evaluation version)

installed. I built the Win XP runtime images on this drive
using

> the evaluation version of Win XP Embedded dev suite.
>- Copied the generated files (from the target designer,

after building the image) onto D: drive.

>- Made changes in the c:\boot.ini to dual boot the

system - booting in Win2000 or WinXP embedded.

>>This is what happens when I restart the machine:
>>- I get the boot menu. When I select Win 2000, the system

boots as usual. No troubles.

>- When I select WinXP embedded, the system displays

the "Starting up..." progress bar, and immediately stops
with

> the blue screen, giving a BAD_SYSTEM_CONFIG_INFO

message, along with the stop code:

>> STOP 0x00000074 (0x03, 0x02, 0x80087000, 0xC000014C)
>>Regards,
>Arvind.
>.
>

LinkBack

Thread Tools

Display Modes

« EWF with DISK overlay and NTFS | windows xpe stop for a few minuts and next go »

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Some questions regarding Office 2000 running on WinXP Embedded.	Ö©ÖëÈË	Windows XP Embedded	1	01-13-2004 04:10 PM
Some questions regarding Office 2000 running on WinXP Embedded		Windows XP Embedded	7	12-19-2003 11:03 AM
Problem using Word 2000 Professional	Redoy	Windows XP Work Remotely	1	11-01-2003 04:51 AM
XP & office 2000 professional	Bob	Windows XP Setup	1	09-02-2003 05:31 PM
XP Professional Compatibility with Office 2000?	rifleman	Windows XP Basics	4	07-16-2003 04:22 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90