Windows Meeting Space - Can't Connect

Posted: 06-09-2008, 01:08 AM
I have two Vista Ultimate machines on my home network. One is x86 and the
other is x64 but this is irrelevant as far as I can tell. They are both on
the same LAN and connected to the same router (D-Link DGL-4500). They both
have IPv6 enabled. They both use Windows Live OneCare and they both have
firewall exceptions for Meeting Space activated (I have also tried disabling
this firewall completely with no effect).

Anyway, no matter what I do, these computers can not connect to one another
through Windows Meeting Space. They can both see each other's meetings and
they can both see each other's "People Near Me" names. But they can not
connect. It always gives an error after about ten seconds saying it could
not make the connection.

I have tried connecting directly, connecting by email invitation, connecting
by file invitation...nothing works.

Does anyone have some advice for me?

Thanks,

John

Reply With Quote

Responses to "Windows Meeting Space - Can't Connect"

Robert L. \(MS-MVP\)
Guest
Posts: n/a
 
Re: Windows Meeting Space - Can't Connect
Posted: 06-09-2008, 02:19 PM
I believe Meeting Space uses port 5722. Can you telnet it?

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"John Adams" <seamus@horadrim.net> wrote in message
news:OXLAqTcyIHA.4816@TK2MSFTNGP03.phx.gbl...
>I have two Vista Ultimate machines on my home network. One is x86 and the
>other is x64 but this is irrelevant as far as I can tell. They are both on
>the same LAN and connected to the same router (D-Link DGL-4500). They both
>have IPv6 enabled. They both use Windows Live OneCare and they both have
>firewall exceptions for Meeting Space activated (I have also tried
>disabling this firewall completely with no effect).
>
> Anyway, no matter what I do, these computers can not connect to one
> another through Windows Meeting Space. They can both see each other's
> meetings and they can both see each other's "People Near Me" names. But
> they can not connect. It always gives an error after about ten seconds
> saying it could not make the connection.
>
> I have tried connecting directly, connecting by email invitation,
> connecting by file invitation...nothing works.
>
> Does anyone have some advice for me?
>
> Thanks,
>
> John
Reply With Quote
Seamus
Guest
Posts: n/a
 
Re: Windows Meeting Space - Can't Connect
Posted: 06-10-2008, 09:48 PM
I'll have to add the telnet windows feature to try this. I will let you
know, but I can tell you that I added specific firewall exceptions to both
inbound and outbound port 5722 on both computers and they would still not
connect.

I'm lost at this point. Could it be the router? I might suspect that the
router is interfering with the IPv6 communication, but when I ping other
Vista machines by their names I get back an IPv6 response, so I know that
IPv6 works at least in that case.

"Robert L. (MS-MVP)" wrote:
> I believe Meeting Space uses port 5722. Can you telnet it?
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
> "John Adams" <seamus@horadrim.net> wrote in message
> news:OXLAqTcyIHA.4816@TK2MSFTNGP03.phx.gbl...
> >I have two Vista Ultimate machines on my home network. One is x86 and the
> >other is x64 but this is irrelevant as far as I can tell. They are both on
> >the same LAN and connected to the same router (D-Link DGL-4500). They both
> >have IPv6 enabled. They both use Windows Live OneCare and they both have
> >firewall exceptions for Meeting Space activated (I have also tried
> >disabling this firewall completely with no effect).
> >
> > Anyway, no matter what I do, these computers can not connect to one
> > another through Windows Meeting Space. They can both see each other's
> > meetings and they can both see each other's "People Near Me" names. But
> > they can not connect. It always gives an error after about ten seconds
> > saying it could not make the connection.
> >
> > I have tried connecting directly, connecting by email invitation,
> > connecting by file invitation...nothing works.
> >
> > Does anyone have some advice for me?
> >
> > Thanks,
> >
> > John
>
>
Reply With Quote
 
LinkBack Thread Tools Display Modes
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Windows Meeting Space David Wright Windows Vista Networking & Sharing 8 07-28-2008 06:06 AM
Windows Meeting Space and NetMeeting H. Djurdjura Windows Vista Networking & Sharing 4 12-25-2007 01:22 AM
windows meeting space meeting Tharinda Windows Vista Networking & Sharing 5 12-11-2007 02:44 AM
Windows Meeting Space over VPN?? Quilnux Windows Vista Networking & Sharing 1 10-18-2007 09:22 AM
Meeting Space - Can't Connect Seamus Windows Vista Networking & Sharing 2 05-05-2007 11:16 PM