|
We have quite a few computers running Windows XP and Vista. We recently
purchased a NAS device and have shared folders using SMB. We are sharing...
|
|
|
Brian wrote:
There is no "ADMIN" to remove your thread. This is Usenet.
About...
|
|
|
OK, when I change from wire to wireless, the wireless connection become not
connected at all !!.
This problem with a frind of me, and he don't know...
|
|
|
mullenj;674863 Wrote:
Jeremy,
You could also try to reset IE7. Click on start> control panel> network
and internet> internet options> under the...
|
|
Everytime I try to start a Remote Desktop session to my my desktop computer
(also running Vista RC2) I get the following error:
"The authentication...
|
|
|
also check if the driver was upgraded or downgraded in device
manager (try a driver rollback?)
On Sun, 6 Apr 2008 15:28:44 -0700 (PDT),...
|
|
|
--
in many there is strength!
|
|
|
try to disable IPv6. This how to may help.
Vista IPCONFIG and Network SettingsHow to disable Auto-tuning on Windows
Vista · How to disable TCP/IPv6...
|
|
|
When you are in Vista's Network And sharing?> Add Network Device> and you
want to add a printer.
Avoid that add a priner which is shared by users in...
|
|
|
You say you have done everything; but something is missing.
Are you using Norton, etc, on the Vista comp?
Have a...
|
|
|
I have similar problem. Prior to installing SP-1 on Vista Ultimate last
evening, I had no problem at my office that has a LAN T-1...
|
|
|
What I mean is the print drivers accessable on the computer, execpt that
the Vista message "Windows cannot connect to the printer. There is...
|
|
|
Thank you for the feed back.
--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to...
|
|
|
On Sat, 5 Apr 2008 12:28:59 -0400, "Ken Varley" <kvarley@dsvalaw.com>
wrote:
On re-reading your message, I see that you've already done what...
|
|
|
See this from the online "Help and Support"...
|
|
|
It was Kaspersky fault. :-/
--
newbie
|
|
|
There may be many causes. Try to turn off auto tuning or/and disable IPv6.
Or this link may help.
Vista Slow IssuesVista business slow accessing...
|
|
|
what is the make and model of your broadband modem?
the DLink router should be the edge device and it should be setup
for PPPoE if that is what you...
|
|
|
from what i have found it appears that vista has a corrupt image. the
solution is to reinstall vista (from the disk). i will report back...
|
|
|
I would make sure each child has a password protected limited or standard
user account and that your account has admin privileges and is protected...
|
