WinXp.Pro Canon MultiPass Printer Error!!

Cari hi & thanks
I did all the reading at canon site but that didn't help much!! I even sent them an Email and got an auto reply telling me same thing to go back and read instructions.. and I did that too.
see I think my problem is when I try to install/reinstall the Canon MultiPass C755 I get this error message:
SISIF.DLL error
ParOpen()doesn't work.
Port ID:1
its a weird error that I've never seen something similar to it before.
I think the problem is either with the Multipass driver update for Win XP that I've got from Canon which
I think its not a signed driver.. and its not compatable with Windows ,, or with the LTP/Ports.
Both, the suite320-Multipass and the printer should be on same port.
I wish I can configure that to have them both on same Port(if that is the case).
I also wish that I can skip and avoid the compatibility and the sign-driver ckeck issue!!
I had same updated driver before installed in my system with no problem>>
thanks any way
any further help from You would be appreciated
Regards
Suzi

"Cari (MS MVP)" wrote:

> See the instructions at Canon's website
> http://www.usa.canon.com/html/conCpr...faq=true#ques5
>
>
> --
> Cari (MS-MVP Windows Client - Printing, Imaging & Hardware)
> www.coribright.com
>
> "Suzi" <anonymous@discussions.microsoft.com> wrote in message
> news:1EC004A3-0359-4C8E-BF8E-B233E5CAD53B@microsoft.com...

> > Hi
> > Windows XP Pro
> > By mistake I deleted some files , roots and programs related to My: Canon

> Multipass C755 Printer

> > So I decide to uninstall the MultiPass Printer then Renintall it using

> Provided CD, but

> > during installation I started to get an error message and the installation

> process stops.

> > error message:
> >
> > SISIF.DLL error
> > ParOpen()doesn't work.
> > Port ID:1
> >
> > I searched for SISIF.DLL and could not find it in My system .
> > when I go to printers and faxes I see the Printer there connected to LPT1

> Printer Port

> > When I go to add Remove programs I dont see the MP suite 320 installed as

> suposed to!!

> > When I go to C/Program files I dont find canon dir there!!
> > There is No single Multipass Icon on Desk Top as suposed to!!
> > I unistall it again and Reinstall it and went to Canon and got some

> drivers updates for WinXP

> > but same problem and same error message.. I contacted Canon, but as usual

> No Proper Help

> > was provided..
> > Any advice or help are highly appreciated.
> > Suzi

>
>
>

Cari hi & thanks
I did all the reading at canon site but that didn't help much!! I even sent them
an Email and I've got an auto reply telling me same thing to go back and read
instructions.. and I did that too. see I think my problem is when I try
to install/reinstall the Canon MultiPass C755 I get this error message:
SISIF.DLL error
ParOpen()doesn't work.
Port ID:1
its a weird error that I've never seen something similar to it before.
I think the problem is either with the Multipass driver update for Win XP
that I've got from Canon which I think its not a signed driver.. and its
not compatable with Windows ,, or with the LTP/Ports.
Both, the suite320-Multipass and the printer should be on same port.
I wish I can configure that to have them both on same Port(if that is the case).
I also wish that I can skip and avoid the compatibility and the sign-driver ckeck issue!!
I had same updated driver before installed in my system with no problem>>
thanks any way
any further help from You would be appreciated
Regards

"Cari (MS MVP)" wrote:

> See the instructions at Canon's website
> http://www.usa.canon.com/html/conCpr...faq=true#ques5
>
>
> --
> Cari (MS-MVP Windows Client - Printing, Imaging & Hardware)
> www.coribright.com
>
> "Suzi" <anonymous@discussions.microsoft.com> wrote in message
> news:1EC004A3-0359-4C8E-BF8E-B233E5CAD53B@microsoft.com...

> > Hi
> > Windows XP Pro
> > By mistake I deleted some files , roots and programs related to My: Canon

> Multipass C755 Printer

> > So I decide to uninstall the MultiPass Printer then Renintall it using

> Provided CD, but

> > during installation I started to get an error message and the installation

> process stops.

> > error message:
> >
> > SISIF.DLL error
> > ParOpen()doesn't work.
> > Port ID:1
> >
> > I searched for SISIF.DLL and could not find it in My system .
> > when I go to printers and faxes I see the Printer there connected to LPT1

> Printer Port

> > When I go to add Remove programs I dont see the MP suite 320 installed as

> suposed to!!

> > When I go to C/Program files I dont find canon dir there!!
> > There is No single Multipass Icon on Desk Top as suposed to!!
> > I unistall it again and Reinstall it and went to Canon and got some

> drivers updates for WinXP

> > but same problem and same error message.. I contacted Canon, but as usual

> No Proper Help

> > was provided..
> > Any advice or help are highly appreciated.
> > Suzi

>
>
>