Real Geek Forums  

Go Back   Real Geek Forums > Archives > Operating Systems > Windows Vista > Windows Vista Networking & Sharing

Notices

Reply

Wireless Adapter keeps disconnecting

 

LinkBack Thread Tools Display Modes
Old 02-26-2008, 10:54 AM   #1 (permalink)
Default Wireless Adapter keeps disconnecting

Hi there,
I recenctly bought a new machine that has Vista Basic installed
on it. I installed the latest drivers for my Netgear wireless adapter which
are supposed to be Vista compatible. However, although I can get connected,
I often have to mess around with the networking settings first and then the
connection will only last around 15 minutes before the adapters led stops
flashing. I then have to reboot to get a connection again. I tried the
adapter back n my old XP machine and it is fine. As soon as the XP machine
boots, the led indicator starts flashing and it doesn't stop until you shut
down. With the Vista machine, the adapter often doesn't start flashing
until you actually connect and then it will just stop after a short while.
I've been messing around with this for weeks now and got nowhere. I would
have suspected the adapter drivers, but it seems as though there are a lot
of other people with the same problem on different adapters, which would
suggest a fundamental problem with Vista.

Can anyone shed any light?


Waldy
Guest
 
Posts: n/a
Reply With Quote  
Old 02-26-2008, 01:36 PM   #2 (permalink)
Default Re: Wireless Adapter keeps disconnecting

which netgear adapter? what router exactly and what version firmware
is in the router? please post text results of ipconfig /all as a
reply to this post
http://digitalmediaphile.wordpress.c...t-text-output/


On Tue, 26 Feb 2008 11:54:30 -0000, "Waldy" <someone@microsoft.com>
wrote:
Quote:
>Hi there,
> I recenctly bought a new machine that has Vista Basic installed
>on it. I installed the latest drivers for my Netgear wireless adapter which
>are supposed to be Vista compatible. However, although I can get connected,
>I often have to mess around with the networking settings first and then the
>connection will only last around 15 minutes before the adapters led stops
>flashing. I then have to reboot to get a connection again. I tried the
>adapter back n my old XP machine and it is fine. As soon as the XP machine
>boots, the led indicator starts flashing and it doesn't stop until you shut
>down. With the Vista machine, the adapter often doesn't start flashing
>until you actually connect and then it will just stop after a short while.
>I've been messing around with this for weeks now and got nowhere. I would
>have suspected the adapter drivers, but it seems as though there are a lot
>of other people with the same problem on different adapters, which would
>suggest a fundamental problem with Vista.
>
>Can anyone shed any light?
>
--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
Barb Bowman
Guest
 
Posts: n/a
Reply With Quote  
Old 02-26-2008, 07:56 PM   #3 (permalink)
Default Re: Wireless Adapter keeps disconnecting

Hi
First make sure that you Wireless Router is Vista compatible (some Wireless
Routers are Not).
If it is compatible look at the advanced Power saving setting in Vista and
tale the Wireless card out of the saving system.
I.e it should be always On. Not saving power.
Jack (MVP-Networking).

"Waldy" <someone@microsoft.com> wrote in message
news:OEu0Z5GeIHA.4696@TK2MSFTNGP05.phx.gbl...
Quote:
> Hi there,
> I recenctly bought a new machine that has Vista Basic
> installed on it. I installed the latest drivers for my Netgear wireless
> adapter which are supposed to be Vista compatible. However, although I
> can get connected, I often have to mess around with the networking
> settings first and then the connection will only last around 15 minutes
> before the adapters led stops flashing. I then have to reboot to get a
> connection again. I tried the adapter back n my old XP machine and it is
> fine. As soon as the XP machine boots, the led indicator starts flashing
> and it doesn't stop until you shut down. With the Vista machine, the
> adapter often doesn't start flashing until you actually connect and then
> it will just stop after a short while. I've been messing around with this
> for weeks now and got nowhere. I would have suspected the adapter
> drivers, but it seems as though there are a lot of other people with the
> same problem on different adapters, which would suggest a fundamental
> problem with Vista.
>
> Can anyone shed any light?
>
Jack \(MVP-Networking\).
Guest
 
Posts: n/a
Reply With Quote  
Old 02-27-2008, 03:26 AM   #4 (permalink)
Default Re: Wireless Adapter keeps disconnecting

On Tue, 26 Feb 2008 11:54:30 -0000, "Waldy" <someone@microsoft.com>
wrote:
Quote:
>Hi there,
> I recenctly bought a new machine that has Vista Basic installed
>on it. I installed the latest drivers for my Netgear wireless adapter which
>are supposed to be Vista compatible. However, although I can get connected,
>I often have to mess around with the networking settings first and then the
>connection will only last around 15 minutes before the adapters led stops
>flashing. I then have to reboot to get a connection again. I tried the
>adapter back n my old XP machine and it is fine. As soon as the XP machine
>boots, the led indicator starts flashing and it doesn't stop until you shut
>down. With the Vista machine, the adapter often doesn't start flashing
>until you actually connect and then it will just stop after a short while.
>I've been messing around with this for weeks now and got nowhere. I would
>have suspected the adapter drivers, but it seems as though there are a lot
>of other people with the same problem on different adapters, which would
>suggest a fundamental problem with Vista.
>
>Can anyone shed any light?

This has just started happening on my Sony Vaio too. I know it worked
fine about a month ago, so something has changed quite recently to
cause it. I see there have been several other threads in this
newsgroup over the last few days also reporting the same problem, or
something very similar.

On my Vista system I can initially connect wirelessly and everything
works fine for a while. Sometimes its okay for 10 minutes, sometimes
for up to an hour or so, but then the problem starts. The networking
icon in the notification area then gets a yellow triangle with an
exclamation mark in it and the connection stops working. In Network
Connections, the Wireless Network Connection turns to "Disabled".
Enabling it does nothing, and the only way to reset it is to reboot.

I suspect it might have something to do with the windows updates that
Microsoft released earlier this month. Something else I noticed is
that the Network and Sharing Center now takes a long time to display
anything in its window (at least a minute), whereas it was previous
much faster. I'm not sure if this is related to the same problem or
not, but someone else in this group reported the same thing after
installing this month's updates.

Chris
Chris Blunt
Guest
 
Posts: n/a
Reply With Quote  
Old 02-27-2008, 08:44 AM   #5 (permalink)
Default Re: Wireless Adapter keeps disconnecting

"Barb Bowman" <barb@nospam.com> wrote in message
news:0u88s3ldts4954nqulfkbjurvnicmvnomf@4ax.com...
Quote:
> which netgear adapter? what router exactly and what version firmware
> is in the router?
The adapter is a WG111T and the router is a DG834GT. The firmware version
was 1.02.04, but I upgraded it last night to 1.02.13. I actually managed to
use it last night for about an hour without a problem. I was dreading it
failing half way through the firmware upgrade. I will have to see if that
has had any effect.
Quote:
>please post text results of ipconfig /all as a reply to this post
Do you want to see that output from a working system or when the problem
happens?


Waldy
Guest
 
Posts: n/a
Reply With Quote  
Old 02-27-2008, 09:00 AM   #6 (permalink)
Default Re: Wireless Adapter keeps disconnecting


"Jack (MVP-Networking)." <jack@discussiongroup.com> wrote in message
news:ezjTHoLeIHA.2268@TK2MSFTNGP02.phx.gbl...
Quote:
> Hi
> First make sure that you Wireless Router is Vista compatible (some
> Wireless Routers are Not).
It's not listed on the HCL list, but according to Netgear it is OK.
Quote:
> If it is compatible look at the advanced Power saving setting in Vista
> and tale the Wireless card out of the saving system.
> I.e it should be always On. Not saving power.
That was the first thing that I did.


Waldy
Guest
 
Posts: n/a
Reply With Quote  
Old 02-27-2008, 10:37 AM   #7 (permalink)
Default Re: Wireless Adapter keeps disconnecting

if it happens again, when it is in the problem state..

On Wed, 27 Feb 2008 09:44:03 -0000, "Waldy" <someone@microsoft.com>
wrote:
Quote:
>
>Do you want to see that output from a working system or when the problem
>happens?
--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
Barb Bowman
Guest
 
Posts: n/a
Reply With Quote  
Old 02-29-2008, 08:44 PM   #8 (permalink)
Default Re: Wireless Adapter keeps disconnecting


"Barb Bowman" <barb@nospam.com> wrote in message
news:0u88s3ldts4954nqulfkbjurvnicmvnomf@4ax.com...
Quote:
> which netgear adapter? what router exactly and what version firmware
> is in the router? please post text results of ipconfig /all as a
> reply to this post
Windows IP Configuration

Host Name . . . . . . . . . . . . : eMachine
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NETGEAR WG111T 108Mbps Wireless
USB2.0 Ad
apter
Physical Address. . . . . . . . . : 00-14-6C-5E-50-65
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . :
fe80::a53f:c14d:7696:2c5%13(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 29 February 2008 21:25:36
Lease Expires . . . . . . . . . . : 03 March 2008 21:25:36
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 218109036
DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast
Ethernet
NIC
Physical Address. . . . . . . . . : 00-15-58-C2-42-8A
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 6:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . :
isatap.{A357B583-2F7C-46E7-B58F-D80F20F9E
7E6}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . :
isatap.{C1A5B560-CF6C-44D3-97A7-0B595A684
BA3}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5efe:192.168.0.2%14(Preferred)
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Local Area Connection* 9:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . :
2001:0:4137:9e66:87e:1bf0:3f57:fffd(Prefe
rred)
Link-local IPv6 Address . . . . . :
fe80::87e:1bf0:3f57:fffd%10(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled

Waldy
Guest
 
Posts: n/a
Reply With Quote  
Old 03-01-2008, 10:37 AM   #9 (permalink)
Default Re: Wireless Adapter keeps disconnecting

first step is to unbind IPv6
http://digitalmediaphile.wordpress.c...windows-vista/

second step is to go into device manager and uncheck the box to let
the computer turn off the adapter to save power. right click the
adapter in device manager, then properties.

On Fri, 29 Feb 2008 21:44:20 -0000, "Waldy" <someone@microsoft.com>
wrote:
Quote:
>
>"Barb Bowman" <barb@nospam.com> wrote in message
>news:0u88s3ldts4954nqulfkbjurvnicmvnomf@4ax.com.. .
Quote:
>> which netgear adapter? what router exactly and what version firmware
>> is in the router? please post text results of ipconfig /all as a
>> reply to this post
>
>Windows IP Configuration
>
> Host Name . . . . . . . . . . . . : eMachine
> Primary Dns Suffix . . . . . . . :
> Node Type . . . . . . . . . . . . : Hybrid
> IP Routing Enabled. . . . . . . . : No
> WINS Proxy Enabled. . . . . . . . : No
>
>Wireless LAN adapter Wireless Network Connection:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : NETGEAR WG111T 108Mbps Wireless
>USB2.0 Ad
>apter
> Physical Address. . . . . . . . . : 00-14-6C-5E-50-65
> DHCP Enabled. . . . . . . . . . . : Yes
> Autoconfiguration Enabled . . . . : Yes
> Link-local IPv6 Address . . . . . :
>fe80::a53f:c14d:7696:2c5%13(Preferred)
> IPv4 Address. . . . . . . . . . . : 192.168.0.2(Preferred)
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Lease Obtained. . . . . . . . . . : 29 February 2008 21:25:36
> Lease Expires . . . . . . . . . . : 03 March 2008 21:25:36
> Default Gateway . . . . . . . . . : 192.168.0.1
> DHCP Server . . . . . . . . . . . : 192.168.0.1
> DHCPv6 IAID . . . . . . . . . . . : 218109036
> DNS Servers . . . . . . . . . . . : 192.168.0.1
> NetBIOS over Tcpip. . . . . . . . : Enabled
>
>Ethernet adapter Local Area Connection:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast
>Ethernet
> NIC
> Physical Address. . . . . . . . . : 00-15-58-C2-42-8A
> DHCP Enabled. . . . . . . . . . . : Yes
> Autoconfiguration Enabled . . . . : Yes
>
>Tunnel adapter Local Area Connection* 6:
>
> Media State . . . . . . . . . . . : Media disconnected
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . :
>isatap.{A357B583-2F7C-46E7-B58F-D80F20F9E
>7E6}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
>
>Tunnel adapter Local Area Connection* 2:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . :
>isatap.{C1A5B560-CF6C-44D3-97A7-0B595A684
>BA3}
> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
> Link-local IPv6 Address . . . . . : fe80::5efe:192.168.0.2%14(Preferred)
> Default Gateway . . . . . . . . . :
> DNS Servers . . . . . . . . . . . : 192.168.0.1
> NetBIOS over Tcpip. . . . . . . . : Disabled
>
>Tunnel adapter Local Area Connection* 9:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
> Physical Address. . . . . . . . . : 02-00-54-55-4E-01
> DHCP Enabled. . . . . . . . . . . : No
> Autoconfiguration Enabled . . . . : Yes
> IPv6 Address. . . . . . . . . . . :
>2001:0:4137:9e66:87e:1bf0:3f57:fffd(Prefe
>rred)
> Link-local IPv6 Address . . . . . :
>fe80::87e:1bf0:3f57:fffd%10(Preferred)
> Default Gateway . . . . . . . . . : ::
> NetBIOS over Tcpip. . . . . . . . : Disabled
--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
Barb Bowman
Guest
 
Posts: n/a
Reply With Quote  
Old 03-01-2008, 01:08 PM   #10 (permalink)
Default Re: Wireless Adapter keeps disconnecting

Hi Barb,
thanks for replying.

"Barb Bowman" <barb@nospam.com> wrote in message
news:bsfis3590q2t8r8greg314l400nuovqci8@4ax.com...
Quote:
> first step is to unbind IPv6
> http://digitalmediaphile.wordpress.c...windows-vista/
That seems to be a popular suggestion, but I've yet to come across anyone
reporting a successful outcome by removing it. I have done it though. I'll
see if it makes a difference.
Quote:
> second step is to go into device manager and uncheck the box to let
> the computer turn off the adapter to save power. right click the
> adapter in device manager, then properties.
That was the first thing I did, as I thought it might be that what was
causing the problem.

Waldy
Guest
 
Posts: n/a
Reply With Quote  
Reply

Tags
None

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads

Thread Thread Starter Forum Replies Last Post
wireless adapter Robert Windows Vista Networking & Sharing 1 01-15-2008 01:41 AM
wireless adapter keeps disconnecting and won't reconnect pliz22 Windows Vista Networking & Sharing 1 09-21-2007 09:51 AM
USB wireless adapter edd080 Windows Vista Hardware & Devices 0 03-18-2007 10:09 AM
Wireless keeps disconnecting CN Windows Vista Networking & Sharing 7 10-17-2006 11:49 AM
Vista Supported Wireless USB Adapter / Wireless PCI Card Kode Windows Vista 2 06-28-2006 03:10 PM


All times are GMT. The time now is 05:51 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Copyright © 2005 - 2007 RealGeek.com. All rights reserved.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90