Wireless Limited or No Connectivity

Thanx Robert. What are the possible causes that it does not receive the IP
from the DHCP other than the windows firewall specially if all the other
workstations are receiving receiving IPs normally except this Vista Labtop.

Thanx.

"Robert L. (MS-MVP)" wrote:

> In many cases, Limited or no connectivity means the Vista doesn't receive IP
> from the DHCP. Posting back with the result of ipconfig /all to confirm it.
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
>
>
> "emoo" <emoo@discussions.microsoft.com> wrote in message
> news:BF338012-1649-4E65-A556-A4865C9841A4@microsoft.com...

> > Hi: I have a windows vista Laptop, I can not connect to a Wireless Network
> > that is using Cisco Network Admission Control (NAC). It is always (Limited
> > or
> > no connectivity). I turned off any firelwall and I am sure from the signal
> > strength. Please help me to solve the problem.
> >

>

Most likely it is indomitable issue. Check any new firmware for the router
or new driver for the NIC. This link may help too.

Vista incompatible issuesVista Incompatible issues. 1. Some switches or
routers may not compatible with Vista – Solutions: upgrade the firmware,
disable the IPv6, re-configure the ...
www.chicagotech.net/vista/vistacompatible.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"emoo" <emoo@discussions.microsoft.com> wrote in message
news:E038FBE3-CCAE-4C8F-9DCA-469188883F81@microsoft.com...

> Thanx Robert. What are the possible causes that it does not receive the IP
> from the DHCP other than the windows firewall specially if all the other
> workstations are receiving receiving IPs normally except this Vista
> Labtop.
>
> Thanx.
>
> "Robert L. (MS-MVP)" wrote:
>

>> In many cases, Limited or no connectivity means the Vista doesn't receive
>> IP
>> from the DHCP. Posting back with the result of ipconfig /all to confirm
>> it.
>>
>> --
>> Bob Lin, MS-MVP, MCSE & CNE
>> Networking, Internet, Routing, VPN Troubleshooting on
>> http://www.ChicagoTech.net
>> How to Setup Windows, Network, VPN & Remote Access on
>> http://www.HowToNetworking.com
>>
>>
>> "emoo" <emoo@discussions.microsoft.com> wrote in message
>> news:BF338012-1649-4E65-A556-A4865C9841A4@microsoft.com...

>> > Hi: I have a windows vista Laptop, I can not connect to a Wireless
>> > Network
>> > that is using Cisco Network Admission Control (NAC). It is always
>> > (Limited
>> > or
>> > no connectivity). I turned off any firelwall and I am sure from the
>> > signal
>> > strength. Please help me to solve the problem.
>> >

>>