Wireless Limited or No Connectivity

Posted: 10-26-2007, 09:30 AM
Hi: I have a windows vista Laptop, I can not connect to a Wireless Network
that is using Cisco Network Admission Control (NAC). It is always (Limited or
no connectivity). I turned off any firelwall and I am sure from the signal
strength. Please help me to solve the problem.

Wireless Limited or No Connectivity


Responses to "Wireless Limited or No Connectivity"

Robert L. \(MS-MVP\)
Guest
Posts: n/a
 
Re: Wireless Limited or No Connectivity
Posted: 10-26-2007, 01:11 PM
In many cases, Limited or no connectivity means the Vista doesn't receive IP
from the DHCP. Posting back with the result of ipconfig /all to confirm it.

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"emoo" <emoo@discussions.microsoft.com> wrote in message
news:BF338012-1649-4E65-A556-A4865C9841A4@microsoft.com...
> Hi: I have a windows vista Laptop, I can not connect to a Wireless Network
> that is using Cisco Network Admission Control (NAC). It is always (Limited
> or
> no connectivity). I turned off any firelwall and I am sure from the signal
> strength. Please help me to solve the problem.
>
emoo
Guest
Posts: n/a
 
Re: Wireless Limited or No Connectivity
Posted: 10-27-2007, 07:27 AM
Thanx Robert. What are the possible causes that it does not receive the IP
from the DHCP other than the windows firewall specially if all the other
workstations are receiving receiving IPs normally except this Vista Labtop.

Thanx.

"Robert L. (MS-MVP)" wrote:
> In many cases, Limited or no connectivity means the Vista doesn't receive IP
> from the DHCP. Posting back with the result of ipconfig /all to confirm it.
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
>
>
> "emoo" <emoo@discussions.microsoft.com> wrote in message
> news:BF338012-1649-4E65-A556-A4865C9841A4@microsoft.com...
> > Hi: I have a windows vista Laptop, I can not connect to a Wireless Network
> > that is using Cisco Network Admission Control (NAC). It is always (Limited
> > or
> > no connectivity). I turned off any firelwall and I am sure from the signal
> > strength. Please help me to solve the problem.
> >
>
Robert L. \(MS-MVP\)
Guest
Posts: n/a
 
Re: Wireless Limited or No Connectivity
Posted: 10-27-2007, 02:49 PM
Most likely it is indomitable issue. Check any new firmware for the router
or new driver for the NIC. This link may help too.

Vista incompatible issuesVista Incompatible issues. 1. Some switches or
routers may not compatible with Vista – Solutions: upgrade the firmware,
disable the IPv6, re-configure the ...
www.chicagotech.net/vista/vistacompatible.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"emoo" <emoo@discussions.microsoft.com> wrote in message
news:E038FBE3-CCAE-4C8F-9DCA-469188883F81@microsoft.com...
> Thanx Robert. What are the possible causes that it does not receive the IP
> from the DHCP other than the windows firewall specially if all the other
> workstations are receiving receiving IPs normally except this Vista
> Labtop.
>
> Thanx.
>
> "Robert L. (MS-MVP)" wrote:
>
>> In many cases, Limited or no connectivity means the Vista doesn't receive
>> IP
>> from the DHCP. Posting back with the result of ipconfig /all to confirm
>> it.
>>
>> --
>> Bob Lin, MS-MVP, MCSE & CNE
>> Networking, Internet, Routing, VPN Troubleshooting on
>> http://www.ChicagoTech.net
>> How to Setup Windows, Network, VPN & Remote Access on
>> http://www.HowToNetworking.com
>>
>>
>> "emoo" <emoo@discussions.microsoft.com> wrote in message
>> news:BF338012-1649-4E65-A556-A4865C9841A4@microsoft.com...
>> > Hi: I have a windows vista Laptop, I can not connect to a Wireless
>> > Network
>> > that is using Cisco Network Admission Control (NAC). It is always
>> > (Limited
>> > or
>> > no connectivity). I turned off any firelwall and I am sure from the
>> > signal
>> > strength. Please help me to solve the problem.
>> >
>>
 
LinkBack Thread Tools Display Modes
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


Similar Threads
Thread Thread Starter Forum Replies Last Post
Another Limited or No Connectivity Tabatha Windows Vista Networking & Sharing 2 02-20-2009 02:08 PM
Limited or no connectivity Meow Windows Vista Networking & Sharing 9 02-26-2008 02:19 AM
Limited Connectivity Char_Aznabule@Windows Vista Windows Vista Networking & Sharing 28 01-21-2008 08:48 PM
Randomly changes to limited connectivity Jon Windows Vista Networking & Sharing 2 10-15-2007 08:12 PM
Wireless network changes to limited connectivity randomly Jon Windows Vista Networking & Sharing 1 10-07-2007 03:07 PM